How to make a flower ball out of a silk scarf? Silk scarf flower ball method

1. First we lay out the silk scarf, and then fold the corner inside according to the following picture.

2, and then we fold the folded corner into a small piece as shown in the figure below.

3. Let the back start from the corner we fold and roll the silk scarf inside, as shown in the picture below.

4. Continuing from the previous step, we grasp the rolled up part and turn the silk scarf over.

5. In the same way, fold the turned corner inside, and then roll the silk scarf inside.

6. The following picture is like this after both sides are rolled, and the size of the volume on both sides should be basically the same.

7. You can put the silk scarf on the neck to try the elastic, and the enclosure is what the picture looks like below, with the tail on the head.

8. After tying up the silk scarf, it looks like the picture below, and the flower ball made of the silk scarf is ready.

Specific steps: 1. Spread the silk scarf flat and fold it in half

2. Pick up the left and right corners of the silk scarf and tie a dead knot.

3. Open the two corners without knots.

4 The two corners that are not knotted, the left and right cross each other (note this point is important) 5 Continue the previous step and pull the two corners that are not knotted outward.

6. Turn the silk scarf over and adjust it, and you can see the beautiful flowers.

Tie the two ends of the diagonal together, and then thread the two corners of the other diagonal through under the knot you have tied, and when you pull it, the flower ball will come out, and adjust the size of the flower ball by hand.

There is another kind of:

Summary. Hello, glad to answer for you. Just follow the steps below to make it.

1. Spread the veil first and fold it back and forth horizontally to create multiple layers.

2. Hold it with one hand and fold it back and forth vertically repeatedly, the more times, the fuller the flower ball will be.

3. After folding, cross the two ends back and forth and tie them tightly.

4. Gently move each fold with both hands (this action is like tearing paper), and a beautiful flower ball is ready.

Hello, glad to answer for you. Just follow the steps below to make it. 1. First lay out the veil and fold the transverse key back and forth to create multiple layers.

2. Hold it with one hand and fold it back and forth vertically, the more times, the fuller the flower ball will be. 3. After folding, cross the two ends back and forth and tie them tightly. 4. Gently fold each fold with both hands (this action is like tearing paper), and a beautiful flower ball is ready.

The method of making the ribbon is as follows:

1.Ribbon Cutting Cut 6 to 8 ribbons of equal length from 10 to 15 cm in length. The longer the ribbon, the larger the final flower. The more strips you cut, the fuller your dates will be.

2.Glue the petals Each cut ribbon will form two petals. Apply a little hot glue to the center of the ribbon, then bend and secure the ends. If you're using ribbon or patterned ribbons, make sure to use glue so that the shiny side is facing outward.

3.Assemble the flowers Stack your petals, one on top of the other, so that the middle is aligned but the petals are offset. Drop a drop of glue between the petals to bond.

Continue stacking until you reach the desired flower fullness. Loosen your petals a little to make your flowers look rich. Make final adjustments to the position and length of the petals, holding them in place with an extra dot or two of glue.

4.Finish with a buttonAdd one (or two) complementary buttons to the center of the flower to finish. If you don't like the buttons, get creative with rhinestones or beads.

5.Use ribbon flowers to add your ribbon flowers to enhance the look of any accessory or gift. It looks particularly cute.

The material of the ribbon is light and elegant, always giving people a very fairy feeling, and the dreamy dismantling of the snow gauze ribbon can be transformed into beautiful flower ornaments made into clothes and accessories after a simple DIY.

How to make flowers with ribbon is introduced below:Need to prepare: ribbons, scissors, needles and threads, glue sticks, and slippery ornaments.

1. First of all, use scissors to cut the ribbon into strips with a length of about 5 cm, and cut a total of 6 pieces.

2. Then pick up a piece and fold it in the middle.

3. Fold it in half again.

4. Fold in half again.

5. Fold down on both sides.

6. Tie the tail with a thread below, and a petal is ready.

7. Fold the six petals in the same way.

8. Thread a needle and thread through the tail of one of them.

9. The others are passed in order.

10. Finally, the ornaments are pasted with glue sticks, and a good-looking ribbon flower is made.

Spherical flower knot ribbon letter with cloth flower production:

Spherical rosette knots are a little more complicated to make than wave knots, but they are also more aesthetically pleasing. Generally, it can be placed in the middle of gift wrapping as a decoration. Let's take a look at the detailed steps to make it::

Step 1: Cut out a ribbon about a meter long and gently wrap it around the back of your hand for 6-8 turns.

Step two, carefully grasp the center position, gently flatten the ribbon loop, and then cut out a V-shape at both ends.

Step 3: Align and overlap the V-shaped openings you just cut, take out the thin threads, and tie them tightly.

Step 4: Gently pull the ribbon from the inside to the outside layer by layer, and then slowly adjust it evenly to reach the best state.

Make simple flowers with ribbon as follows:

1. First of all, we cut the ribbon into a small strip of about 30 cm, which is used for tying flowers.

2. Next, we coil the silk limb belt into a circle, and after the circle is coiled.

3. Coiled 4 more times, so that it became 5 circles, and then cut it with scissors, and fixed the two broken ends with transparent glue at the joint.

4. Then fold the circle in half slightly, see the figure below.

5. Then fold the fold up to become the pattern shown in the figure below.

5. Next, let's draw two diagonal lines on the ribbon at the bottom end.

6. Then use scissors to subtract along the diagonal line. Repentance.

7. Then tie it through the middle with a thin ribbon and tie it tightly.

8. Next, let's loop the ribbon one by one with our hands.

9. Each ribbon circle rotates 360°, and gradually completes all 10 circles.

10. During the period, you can fix the coil with a thin ribbon, and then adjust the position of the petals slightly.

11. In this way, a simple ribbon flower is ready.

Basic Introduction to Ribbon:

Ribbon is a delicate handmade ribbon, different colors of ribbons, representing different meanings. a yellow ribbon symbolizing the "safe return"; a green ribbon symbolizing "health and love"; The red ribbon that symbolizes the "beginning of love" in Tanshi, a different ribbon, flutters in the same sky as us, conveying our same love and blessings.

1. Fold the long silk scarf into a 2cm wide ribbon and tie a slipknot around the neck.

2. Rotate the left and right bands together in a spiral shape.

3. Continue step 2 and rotate it to the very bottom.

4. Wrap the rotated ribbon around the slipknot with your fingers in a counterclockwise direction.

5. Continue step 4 and then wrap it around to the highest place, leaving a length of about 5cm to the flower, and finally use a pin to pin the flower and the slipknot to adjust the length of the flower.

Here's how to make a silk scarf into a flower:

1. Prepare a square silk scarf, spread the front of the silk scarf downward, and tie it together in a knot diagonally.

2. Thread the remaining two corners through this node from the bottom, one on the left and one on the right.

3. Then gently pull the two corners, about the size of a bud in the middle, you can stop pulling.

4. Finally, turn it around, adjust your favorite flower shape by hand, and the tie of this square scarf is completed.

About silk scarves

Silk scarves, clothing accessories worn around women's necks, used to match and embellish clothing. It is said that around the Middle Ages, modern silk scarves began in places like Northern Europe or Northern France. It began as a protection against the cold, until the mid-16th century, when materials changed and evolved into accessories with decorative functions.

The material of the silk scarf: Spring silk: Silk is the most commonly used material for silk scarves, and the silk scarves made with this material not only have a charming luster, but also have natural folds that look natural and beautiful.

The natural fiber of silk can avoid the trouble of static electricity in the dry and windy spring, and has good heat retention and elasticity.

Summer hemp: The hemp silk scarf feels refreshing when enclosed, and it is easy to match with any summer dress, which is not only beautiful, but also can resist the damage of air conditioning to the neck and shoulders. The hemp silk scarf is prone to wrinkles, but it is its casual and natural folds that reflect the wearer's romantic style.

Autumn cotton: In the cool autumn breeze, the cotton limb silk scarf can not only resist the autumn wind, but its light fabric will not hide the feminine charm under the heavy material.

Pashmina: Pashmina, the Persian word for "wool", is thin, soft and warm, keeping you warm and stylish in the cold winters.