-
The mobile phone cannot receive calls normally**Causes and solutions:
1. Check whether the phone is set up for call forwarding, turn on airplane mode, call restrictions, etc., and it is recommended to try again after canceling.
Second, the number is in a state of shutdown affects the call**, you can query the number information to understand the status of the number, if it is abnormal, you need to restore the normal state of the number before calling**.
3. Please check whether the mobile phone card is damaged or not inserted properly, and you can go to the local business office for testing or replacement of the mobile phone card.
4. It is recommended that you restart or switch off the airplane mode and try again. If you still can't make calls**, you can also change your phone for testing.
If this is not the case, you can contact the local customer service for feedback.
-
Samsung phones generally recommend the following steps to troubleshoot and deal with them:
1.Check to see if your phone is in airplane mode.
Reinsert attempt.
3.Check if you have enough balance on your phone.
4.If you can dial certain fixed numbers, check whether the fixed dialing function is enabled, and it is recommended to disable this function.
Note: Pin2 code is prompted when fixed dialing is disabled, and you need to contact the network operator for consultation for this password.
5.Check if the call restriction feature is set up. If so, please cancel and try to dial**.
6.Replace it with a different SIM card.
7.Back up your data.
Contacts, SMS, **, etc.), factory reset.
If the problem persists, it is recommended that you bring the purchase invoice, repair card and mobile phone to the local after-sales service center, and a professional engineer will help you test it.
-
1. Caused by poor SIM card contact.
Workaround: Reinstall the SIM card.
2. Caused by invalid SIM, such as arrears shutdown or SIM card damage.
Solution: Charge phone bill, how to SIM card damage, go to the mobile business hall to replace the card.
3. The phone is locked.
Solution: If the phone is locked, you only need to unlock it, use the correct password or fingerprint, if the password is locked incorrectly for many times, then you need to wait for the lock time to end before unlocking.
-
Question 1: What is the reason why the mobile phone keeps showing dialing failure? If the payment is in arrears for a long time, the carrier will add it to the blacklist.
Check whether the mobile phone is out of power, and then check whether the mobile phone signal is unblocked, and then there is a network selection or something in the call settings of the mobile phone settings, that setting, depending on the personal mobile phone, if it doesn't work, try to change the card to determine, if other cards can get through, that is the card is broken, if other cards can not be connected, then there is a problem with the machine.
Question 2: What happens if the mobile phone can't dial out First, is it in arrears?
Second, the problem of mobile phones.
3. Reinstall the SIM card.
Fourth, signal problems.
Fifth, China Unicom and China Mobile have mobile phones that are customized and cannot be universalized.
Question 3: What is the failure of mobile phone dialing Is there a call setting in the phone settings, there is a network selection or something in it, and that setting depends on the personal mobile phone.
Question 4: When the mobile phone hits **, it shows that the dialing fails, what is going on Is it a frequent failure or an occasional failure? I've also encountered this situation, it's a big deal to restart the phone, it may be caused by no signal.
Question 5: What is the reason for the failure of the mobile phone to dial the number is not poisoning.
Sometimes mobile phones are like this. Signal issues.
Sometimes it is also the network output error.
Nothing to do. Purely normal.
Question 6: Why does my mobile phone fail to dial when I dial it? Is there a call setting in the phone settings?,There's a network selection or something.,That setting.,It depends on the personal phone.。
Question 7: What does it mean that the mobile phone dialing fails 5 points The SIM card is not in good contact, or the mobile phone system is defective!
Question 8: What happens if the mobile phone fails to dial The signal is unstable, just call a few times in another place.
Question 9: Why does dialing show that the dialing fails to exceed the permission setting It is recommended that you go to Settings - > Permission Management - > Application Select - > to view the dialing setting permissions!
The common causes and solutions for phone not receiving calls** are as follows:
Check whether the mobile phone is in arrears and shut down, and it is recommended to pay and recharge;
Check whether the phone is set to call forwarding, turn on airplane mode, call restrictions, etc., and it is recommended to cancel and try again;
Check whether the function or signal of the mobile phone is normal, it is recommended to change the mobile phone or location and try again;
If you cannot use it when roaming to other places, it is recommended to check whether the local network signal is normal and whether the number has been activated for roaming permissions.
Try restarting or changing your phone to see if you can make calls**;
Bring your SIM card to your local office for testing or replacement.
Problem 10: Huawei mobile phone dialing failure shows that the dialing permission may be caused by how to solve it Dear, it is recommended that you go to Settings - > Permission Management - > Application Selection - > to view the dialing setting permission! Have a great day!
-
Just clear the call logs, here's how:
1. First of all, find the "**" option and enter it, as shown in the image below, and then enter the next step.
<>3. Then, after completing the above steps, you can selectively or batch delete the call logs, as shown in the figure below, and then enter the next step.
<>5. Finally, after completing the above steps, the call log has been deleted, and the mobile phone dialing pops up the previous number is no longer available, as shown in the figure below. In this way, the problem is solved.
-
The mobile phone always shows that the dialing failure is related to the incompatibility of third-party software or the mobile phone card and other reasons, it is recommended to follow the steps below
1. Restart your phone.
2. Standby Page - Apps - Settings Application Manager (Apps - Manage Apps) All phones Clear data.
3. Uninstall the recently installed third-party calling software, eliminate software compatibility problems, operation: open the settings Application Manager (Application - Manage Applications) Has** - Find the software - uninstall.
4. Back up the data in your phone (contacts, text messages, **, etc.), and then restore the factory settings (Settings - Reset Privacy - Personal - Factory Reset).
5. If the above operation methods are invalid, there may be a problem with the internal program, it is recommended to bring the mobile phone three packs of vouchers, and send the mobile phone to the nearest service center to be checked by the engineer to check the machine.
The inability of GPS to locate is limited by many factors, the most important of which are signal and motion status. GPS is often difficult to locate in places with poor satellite signals (e.g., indoors, tunnels, urban blocks with tall buildings, etc.), or in motion. It is recommended that you: >>>More
There are two kinds of mobile phone heating: one is the heating of the machine itself, the other is the heating of the battery, 360 Guard has a measurement of battery temperature, to see if your battery is more than 50 degrees, more than the battery is the problem, you can change the battery. If it doesn't exceed the problem of the machine itself.,It's best not to set a phone case,,Maintain good heat dissipation,,There's no other good way.。。
1. Open your phone and tap your phone settings on the main interface. >>>More
Reason: There is a delay between the time a signal is sent and its final acceptance, and every network is subject to this delay. >>>More
If you find that your phone suddenly has a splash screen or a splash screen when you are using it. >>>More