Volkswagen CC2020 rear window can t be raised?

1. Reset the window lift system

The window of the car can not be lifted is generally due to the battery power failure, the system disconnects the power supply or ground wire of the window control module when the vehicle is maintained, which can be solved by resetting the window lifting system, starting the car, controlling the switch of glass lifting, the glass continues to pull for more than 3 seconds after the glass rises to the top, release the switch and press and hold it immediately, initialize the lifting system of the window, if you are not sure, it is recommended to find professional technicians to deal with it.

2. Remove the dirt in the glass guide trough

When the car glass is skewed or difficult to lift, it may be caused by too much dirt such as dust in the glass guide trough, the resistance of the car glass increases in the lifting process, the owner can use a wet towel to reach into the glass guide trough with chopsticks, and scratch and clean it up and down in the guide trough, and constantly take down the towel to clean the dirt washed down on it, until the dirt in the guide trough is cleaned, and check whether the window glass returns to normal after cleaning.

3. Directly replace the glass regulator switch

Window glass lift switch is more common in daily use of the car, the frequency of use is high, the probability of damage in use will be relatively large, if the glass can not be lifted can be replaced by the car glass lifter, when the hands-on ability is relatively strong, you can replace it yourself, but it is still recommended that the owner go to the 4S shop. Replacement.

Hello! According to your description, the causes of the failure are as follows:

The switch is damaged. If one of the main driver's glass lift switch and the rear seat lift switch can be lifted, it means that the switch is damaged.

The glass regulator is damaged. If the two can't be lifted, it may be a glass regulator (steel wire rust and breakage, regulator jamming).

The lifting motor is faulty. If there is a sound of the motor running, it means that the motor is normal, and if there is no sound, the motor may be damaged or the power supply line is short-circuited.

The control line is damaged. Because the Volkswagen CC is a frameless door, when the door is opened, the glass will fall, if it does not fall, it may be that the door lock control line is damaged, or the motor is damaged.

The specific reason is that the actual vehicle inspection is required, and it is recommended to choose a professional repair shop or 4S shop.

Hope it helps!

Hello, the window can not be lifted first to judge whether the main driver's glass is locked, and then to judge whether the main driver can control the rear window, and whether the rear door can control the rear window glass lifting, if there is no response, it means that there is a problem with the lifter or control computer, etc., you need to go to the 4S shop to check and repair, you can replace it free of charge through a claim, I hope it can help you.

The window glass can't be lifted, the switch is fine, the wiring is fine, the motor is fine, sometimes it can be used, sometimes it can't be used, and when it can't be used, the relay doesn't respond. When I can use it, I press down the gap to rise, and I cannot go down.

Three common fault causes and maintenance methods of automobile glass regulators:

1. Abnormal sound of glass vibration. This indicates that the glass regulator screw may be loose, and the solution is to tighten the regulator screw;

2. The glass regulator is stuck. This failure may be caused by deformation or damage to the glass mud groove and loose fixing screws of the lifter.

Deviation of the installation position of the moving and guide rails or damage to the glass regulator. The maintenance method is mainly to clean and replace the glass mud tank or loosen the glass.

Glass mounting screws to adjust the position of the glass.

3. All glass regulators cannot work. The cause of this failure may be the detachment of the tie wire of the combination switch and the total power supply.

Wire detachment, poor relay contact, damage, or lockout switch poor contact or not closed. The repair method is to overhaul the circuit. Hand.

The principle of stirring the window is that there is a gear in the center of the handlebar, and there is also a curtain of knife-shaped chainrings on the glass lifting linkage mechanism, as long as one turn.

The grip and gear drive the chainring, which will make the glass go up and down a specific track. Nowadays cars are using electric windows, and electric windows only.

However, the crank part is changed to be driven by an electric motor, and the direction of the current is controlled by the switch to change the direction of the motor.

toward, let the glass window rise. One of the most important responsibilities of the glass window in the car is to protect from the wind and rain, so in the glass frame.

There are rubber seals on all sides, so that the glass can be close to the body, to achieve the function of wind and water resistance.

Glass regulator is a lifting device for automobile door and window glass, which is mainly divided into two categories: electric glass regulator and manual glass regulator.

Now the lifting (closing and opening) of many car door and window glass has abandoned the manual lifting and lowering mode of rocker type, and generally change to the electric lifting mode of button type, that is, use electric glass regulator. The electric glass regulator for cars is mostly composed of an electric motor, a reducer, a guide rope, a guide plate, a glass mounting bracket, etc. The general switch is controlled by the driver, the opening and closing of the whole door window glass, and the sub-switch on the handle of each car door is controlled by the occupant respectively, and the operation is very convenient.

First of all, you need to activate this function in the 4S store, and you need to sign an exemption agreement to activate it (one-click cancellation is risky). To use it, press and hold the lock or start button on the key fob to lift and lower it with one key.

One-key window lifting and seepage resistance refers to the system that lifts the window glass into place through one-button control. The one-button window lift control switch has two gears, and the first button is in the same position as a normal power window. The second position is that if you click and release, the window will automatically open or close completely.

However, when using ordinary power windows, you need to press and hold the switch, and release the button when the window is lifted to the desired position, and the lifting process stops. The electric glass regulator for automobiles is composed of a motor, a reducer, a guide rope, a guide plate, a glass mounting bracket, etc. The driver controls the opening and closing of all doors and windows on the main switch, and the passenger controls the opening and closing of all doors and windows on the secondary switch in the door handle, which is very convenient to operate.

At present, medium and high-end cars are equipped with a one-key window lifting function, which is mainly convenient for drivers and passengers, mainly to avoid the driver from opening and closing the window and distracting, and improve the safety factor. The one-button lifting window generally has an anti-pinch function, otherwise there may be a danger of pinching the hand.

Millions of car purchase subsidies.

Volkswagen CC ( Check price |Detailed explanation of the model) window one-key lifting setting method, start the vehicle first, judge in the position of the second gear, first press the switch to the bottom, and then lift the button to lift the glass to the top, respectively, according to 5 seconds without moving. When the driving speed exceeds 15km h, the car automatically locks, and the indicator light on the door lock button after the car is locked. The vehicle unlocks automatically when it is parked and turned off.

How to use the one-button lifting button for Volkswagen CC windows:

One-click down: 1Press the switch until the first gear is in first gear and stay there until the window moves to the desired position.

2.Press the button firmly to reach the second gear position, at which point the window glass will automatically lower and open completely.

One key to rise: 1Pull up the switch until the first gear and hold it until the window moves to the desired position.

2.Pull the button up a little hard to second gear, and the window will move upwards on its own.

Generally, mid-to-high-end models are equipped with a one-button window lifting function. The one-key lifting of the window refers to the system that the car window glass can be controlled by one key to lift in place, and the car window lifting control switch equipped with the one-key lifting of the window has two gears, and the position of the first button is the same as that of the ordinary digging eggplant power window. The second position is to press and let go, and the window will automatically open or close completely.

Photo by Xu Shuanghe) @2019

Can the rear window of the Volkswagen CC be lowered only by half Can the rear window of the Volkswagen CC be lowered by half Due to design reasons, the rear window of the Volkswagen CC can only be opened half, not all. Only the front window can be lowered completely, which is normal. The windows of some models can only be lowered by half, which may be caused by damage to the window regulator, lack of lubrication, broken button contact, and foreign objects in the gap between the windows.

1.Window delay buried elevator damage: There is an elevator under the car window, and it can move up and down flexibly through the elevator window.

If the window regulator is damaged, the window regulator will be incomplete or unable to be raised. In this case, repair the window regulator at a repair shop or 4S shop, and replace it directly if necessary. 2.

Lack of lubrication: If the internal parts of the window are not lubricated, the window will not fully rise due to friction. In this case, simply apply lubricant to the inside of the window.

3.Button Interruption: If the window lift control button is damaged or broken, the window lift function cannot be controlled normally.

In this case, the window button should be repaired. 4.There is a foreign object in the crevice of the window:

If foreign objects such as melon seeds, sand, and stones fall into the cracks of the window, the window will not be able to rise and fall normally, just clean it. @2019

Summary. Hello Honored for your question: Press the rear end b of the button to the 1st gear position. Press the button to the 2nd gear position to automatically open the electric sunroof.

Hello Honored for your question: Press the rear end b of the button to the 1st gear position. Press the button to the 2nd gear position to automatically open the electric sunroof.

It's the Volkswagen CC of 2018

There's no backend B as you said.

You take a picture for me**. Reading the position of the light overhead.

You marked the location for that one. Kiss.

Summary. The possible reasons why the sunroof of 18 Volkswagen CC cannot be closed are: 1

Damaged sunroof mechanical parts: Due to improper use or time, the sunroof window mechanical parts may be damaged, resulting in the sunroof not being able to close. 2.

Motor controller failure: The motor controller's control program to control the sunroof closure may malfunction, causing the sunroof to fail to close. 3.

Motor wiring harness break: The motor wiring harness may have an open circuit, and the motor will not work properly. 4.

Failure of the central control module: Due to the failure of the central control module, the sunroof cannot be closed. 5.

Damaged sunroof control panel: Damaged sunroof control panel can also affect sunroof closure operations, and it can also be very noticeable. 6.

The sunroof controller is abnormal: The sunroof is closed normally due to the controller failure.

The possible reasons why the sunroof of 18 Volkswagen CC cannot be closed are: 1Damage to the mechanical parts of the sunroof:

Due to improper use or time, the mechanical parts of the sunroof window may be damaged, resulting in the sunroof not being able to close. 2.Motor controller failure:

The control program of the motor controller to control the sunroof closure may malfunction, causing the sunroof to fail to close. 3.Motor harness disconnection:

There may be an open circuit in the motor harness, and the motor will not work properly. 4.Central control module failure:

Due to the failure of the central control module, the sunroof cannot be closed. 5.The sunroof control panel is damaged

Damage to the sunroof control panel can also affect sunroof closure operations, and it can also be noticeable. 6.The sunroof controller does not swim normally:

Due to the failure of the controller, the normal closure of the sunroof is affected.

Can the sunroof controller be repaired by itself.

It is not recommended to repair it yourself, it is recommended to go to the repair point to repair.

Can you force it to close if you can't close it?

No, forcing it to close may damage the sunroof.

You just can't force it to close, right?

Yes, it is advisable to go to a repair point.