How to upgrade the satellite dish pot? How to upgrade the small pot satellite?

Change the right-handed 12100 frequency 28800 and 12140 frequency 28800 two groups of right-handed signals, the high-frequency head should be dual-polarized, otherwise the single-polarization chip will be pulled out, don't understand and ask me again!

1. In normal use, press the menu button of the remote control to bring up the menu options;

2. Find the system settings and press the confirm button to enter;

3. After entering, select the system upgrade, and then press the confirm button to ** detect whether there is an updatable upgrade package, if there is an upgrade package available, the system will prompt the user whether to upgrade the system to the latest version, at this time press the confirm key to start the upgrade;

4. After the upgrade is completed, it will be automatically restarted, and it can be used normally after restarting;

5. If you need to enter the device password to proceed to the next step in the process of operation and upgrade, you can generally enter 0000 or 9999.

"Pot" in satellite reception is an image of the colloquialism, "cauldron lid" is people's image name for satellite TV receivers. The "cauldron lid" has provided great convenience for some rural areas to understand the outside world, but the prevalence of the "cauldron" has also caused some hidden worries. Because the parabolic antenna is often used for satellite TV reception, and the reflective surface of the parabolic antenna is similar to the shape of the iron pot we use in daily life, people call the parabolic antenna the satellite "pot" or "pot lid" antenna, referred to as the "pot".

There are two kinds of parabolic antennas: forward feed antenna and partial feed antenna, and the reflective surface area of the forward feed antenna is relatively large, so it is commonly known as "cauldron"; The reflective surface area of the relative partial feed antenna is relatively small, which is called a "small pot" or "small ear". In general, the "cauldron lids" installed by residents are almost never approved.

1. Assembling and placing the pot. Install the pot according to the instructions, then place the pot where you want to install it, and be careful not to have any obstructions! The end of the white lid of the high-frequency head is facing the pot noodles, and the signal cannot be adjusted if it is reversed.

The high-frequency head is stuck on the bracket, facing forward and backward, and pointing to the left and the center to the right. The satellite pot can be installed on the roof, ground, balcony or air conditioner, and there can be no high-rise buildings, big trees, glass, anti-theft windows, anti-theft nets or even branches in the southwest direction.

2. Connect the antenna and receiver. If the set-top box does not light up after plugging in the coaxial cable, say that the coaxial cable is short-circuited, check the joints at both ends of the coaxial cable, and clean up the fine mesh inside, which cannot be in contact with the copper core.

3. Link TV and receiver. It's very simple, the red line is connected to the red line, the yellow wire is connected to the yellow line, and the white wire is connected to the white line.