Ask for advice on the inside of the table tennis table twisting technique, how to get the ball in th

Hit a straight board. The inside twisting effect is good, not too far from the table

Too few points. It's not enough to feed the dogs.

Take a look at Zhang Jike's games, combined with the guidance of professional coaches, and practice more is the king.

Picky. As long as you can see that it is more than 2cm higher than the net, you can even bounce directly, and when you twist it, it requires that the ball cannot be too fast, and the ball on the side appears to be fast. If you're good at it......I don't think it's necessary to screw it, I always shoot it directly, whether it's a straight or horizontal board.

Of course, you can, the technique of connecting the top spin and the downspin is completely the same, only the touch part is different, the bottom spin is the middle to the middle and upper part of the ball, the top of the top to the top, and the more the downspin touches the ball the lower it is, and vice versa, the more upper, there is no difference in others.

If the incoming ball is in the middle or left, you can twist it, adjust the shape of the racket to speed up the twisting speed. If you're on the right side, it's best to hit with a pick.

I recommend using underspin when serving, because if you play topspin, it will be easier for your opponent to find an opportunity to attack you, and if you have a downspin, it will be difficult for your opponent to have a chance to attack you! If you really want to send, you have to pay attention to speed, the faster the better, the ball speed is fast and the spin will change the direction of the trajectory, so that the opponent will be difficult to figure out your ball @

Come out and spin the impact ball or the sharp length with the top, it is easy to twist, the center of gravity is lowered, the shoulders are sinking, and it is good to rub the ball during the rising period of looking for the ball.

Dealing with short side topspin balls:

1. The backhand position can be twisted and pulled into a forward arc circle, pay attention to the shape of the racket and the direction of the wrist force;

2. The forehand position can be directly picked!

Don't screw it! If you can't screw it when you touch a powerful one, you'll be left in a hurry.

Compared with a good ball, don't lead back, do friction, is to pull the ball, don't lead back when the ball falls, and retract the action upward.

Short side topspin, try not to rub, don't rub, look at the rising period, control the ball, just play.

Yes, the rotation of the side to the other party pays attention to the plate type and the direction of force.

Yes, gently send it out under the belt of the ball.

Side upspin directly hits, what else do you screw!

Yes, just adjust the tempo size.

Flatten the plate, screw it again, and pay attention to the adjustment.

Why don't you play it with side topspin? Also screw.

Yes, you need to grasp the angle and strength.

Absolutely. But why not just hit it?

How to practice:

1. When practicing, it is best to use a multi-ball method;

Second, the primary point of consideration when practicing is not how to let the ball on the stage, but how to fully exert force, about this second point, is due to the experience of practical application, we would rather twist out of bounds than gently twist when practicing!! When you first use this technique, you must use enough force when practicing to make the ball have a kind of ruthlessness.

3. In my experience, almost all balls in the table are suitable for screwing technology, but it is required to accurately judge the rotation of the opponent when using it;

Fourth, the ball can also be screwed, but it is not as simple as pulling or hitting directly, after all, the action is more exaggerated when screwing;

Fifth, don't always expect to twist the ball to score directly, in the end, when the opponent adapts, you can only strive for the initiative;

Sixth, at the beginning of the practice, it is necessary to practice two lines, three drop points, the line has changes to be useful in actual combat, two lines refer to the straight line oblique line not much to say, three drop points are my summary and experience: the drop point of the straight line is the greatest threat at the end line, the drop point of the slash is at the end line, this one drop point is the most conducive to the force, easy to make a fierce ball, the other drop point is near the net, this drop point is the most tricky, very close to the net of the serve is suitable for screwing here;

7. Screwing can be combined with the backhand and backhand pulling, which is conducive to improving each other's feel.

The backhand twist is mainly aimed at the opponent's table serve, at the beginning you can practice the opponent's light near the net of the table does not turn the ball or spin the ball, this is relatively easy, the method of twisting is: when the opponent serves, predict the ball to the approximate position in their own table, and then step forward with the right foot, while the right elbow joint is raised, the wrist is turned to the right, like a taut clockwork, and at the same time the ball comes to their own table and jumps to the highest point, the wrist draws an arc to the left to rub the ball. It's roughly like this, just practice more to find a feeling.

It's hard to say, but it feels like a racket spinning around the ball when it hits the ball. It depends on the personal feel.

Straight or horizontal, you're talking about a backhand pick, right?

There's no need to practice, just rub it over.

This thing is not for glue.

In addition, twisting and pulling is a technology, which can basically be made of every kind of rubber, whether it is granular or anti-glue (although there is an objection to this sentence)...The less depends on the personal feel, and the larger depends on the proficiency of the technology.

If you are a beginner, it is recommended to use adhesive rubber, which is easier to use. As for the national players, their attainments are too high, they practice thousands of times a day, we usually can't reach this intensity, and their feel is much more delicate than ours.

Therefore, they use imported rubber and even special ones, just to speed up the speed on the basis of successful twisting and pulling, and the faster the better. Martial arts in the world, only fast is not broken. And they usually practice with each other, those fast balls have long been familiar, and the balls without speed will be beaten to death.

If you screw it, it must be reversed, because good friction is required; Granule glue can also make a similar flipping action, and the structure is the same.

Personal feeling is not a problem of rubber, mainly a problem of action, observing the degree of rotation of the ball, controlling the strength of the wrist and fingers, it takes instant explosive power, it is more difficult, and the landlord needs to practice more. You can find a friend to help you send a downspin ball near the net, pull it yourself, find a feeling, and it is best to fix the point that can be sent. Thank you, pure hand.

Most of them use foreign rubber, but Xu Xin uses a special hurricane.

If it's cheap, use the moon, it's easy to twist and pull.

Playing the ball under the net is caused by improper control of the plate shape and excessive pressure on the plate. This is especially true when hitting a ball with strong underspin.

Solution. When hitting the strong downspin ball in the table, the control plate type, the ball board and the table are 80-90 degrees, and at the same time, there is a slight friction to ensure the arc. In addition, for the strong downspin ball in the table, the blast punch technology can also be used, but the use of this technology is also to bring friction.

Generally speaking, when playing the ball under the net, it must be too pressed, resulting in the arc of the return ball being lower than the net. Therefore, it is necessary to learn to adjust the plate shape in time and find the right hitting point.

Learn to twist and pull, or split at a large angle to destroy the opponent's control and force the opponent to pull up... According to what you said, the opponent's style of play against you may not pull the ball all the time, so as to contain your attack with control. If you swing short and suddenly split long, you can also make the quality of the opponent's return ball drop, high or even come out, and then you know...

First of all, if the opponent does not attack, you can attack, and if you do not attack, you will take the initiative. There are very few top players in the world who don't attack and only defend.

Therefore, the idea of not attacking is wrong, and if you have the opportunity, you have to attack yourself. The normal situation is not to let the opponent attack, and to attack by himself.

If you want someone else to attack, just put a high ball on his forehand, but is there any point in getting you killed by a board?

Splitting the opponent's forehand will pull up for normal players, and even the backhand will be pulled sideways. This also shows the importance of the attack above.

As for the small ball handling, the purpose is to prevent the opponent from getting started (attacking) and achieve the goal of controlling the opponent. So rubbing the ball is a control technique. Table tennis theory only has two basic techniques, offense and control, and there is no such thing as defense (although this term is often used).

I am a professional team.

If you split the opponent, you can't get the ball back, you can only pull or slice the ball. This way you can pull back, or pull up and down first.

You have to make the opponent give you the ball, give the opponent the backstage spin ball, if the opponent does not handle it well, it is easy to come out, and most of the opponents want to pull, isn't this exactly what you want. Of course, people who can play are small balls near the net, and it will be helpful to learn how to handle the balls in the table.

What is the small ball handling of table tennis!

Playing the ball in the table should be close to the table, to be able to quickly switch between the near and far table, the foot movement should be fast, after arriving at the near platform, it will generally choose to take a small step forward with the right foot, and at the same time the hand can not be in a hurry to attack, the ball in the table is best to defend, you should pay attention to rotation when receiving the ball, it is best to cut the ball, play the spin ball, and also play the ball in the field, do not give the opponent the opportunity to attack, if you can also pay attention to the control of the landing position when receiving the ball, it is better, I am playing a horizontal shot, the forehand and backhand can be used when chopping the ball, so the ball in the backhand position is not very nervous, but after all, the right-handed backhand is not as good as the forehand, so it is better to return the ball to the backhand, and the ball in the table that is not strong in rotation can also choose to rush directly, but pay attention to bring the ball up a little, otherwise it is still easy to go to the net.

If you want to pull the ball, when you lead the shot from under the table to the table, you have to bypass the table, and then quickly close the arm, you can pull it, but if the downspin is strong, it is not easy to pull

Table tennis teaching - the academy teaches you the standard horizontal version of the in-stage twisting, and then practice after reading!

I myself am also a table tennis enthusiast, first of all, the backhand side twist belongs to the backhand fast attack technology in the table, it can be combined with the backhand bounce and pick to carry out the complementary technology in the table, and secondly, the backhand side twist reflects the speed of fast, suddenness, and the angle is more difficult to control (I basically play the left and right half of the big angle, and then cooperate with the forehand or sideways rush) Next, let's talk about the technical action of the lower side twist, first of all, the backhand should meet the shot, judge the length of the ball, lead the racket to prepare to hit the ball, and the wrist is quickly buckled downward, so that the racket head sags, When the incoming ball is high, quickly swing the racket with the inward buckle up and forward, and hit the ball at the moment: point, aim at the left rear of the incoming ball, and hit the ball with the front (top) of the racket. Remember that the side and front of the shot are feasible, I usually hit the front of the ball, I feel that this way to eat the ball, the racket is probably screwed to the head down, and finally restore the connection line to a board.

I hope it will help you, and the side twist is an in-table technique that must judge whether the ball is coming out in the correct use.

When the horizontal racket player deals with the tabletop ball, the general backhand rubbing is common, and it is also a relatively safe method, but in the era of modern and rapid development of table tennis technology, more active playing styles emerge in an endless stream.

The movement of this technique is more similar to the action of twisting things by hand, so it is also called the backhand inner twisting technique. We often hear the host say in table tennis that the backhand initiative to twist the ball up is this technical action. The purpose of using this technique is to actively turn the downspin ball into an upspin ball, and to actively enter the holding phase from the return ball.

Horizontal backhand side pull table ball technical action:

Position: Judge the incoming ball, meet the body forward, and choose the position to pull the ball.

Lead: The elbow joint is slightly pushed forward, so that the racket head hangs down close to the table, the wrist is adducted and flexed, the racket is appropriately leaned forward, and the hand should be relaxed.

Swing the racket to hit the ball: When the incoming ball jumps to the upper elevation point, the forearm takes the elbow joint as the axis, accelerates the swing and rotates externally to exert rapid force, and the racket swings forward and upward in a semi-arc shape, rubbing the middle and middle sides of the ball.

Restoration: The swing should not be too long to facilitate restoration.

Precautions: The body should be forward, mainly relying on the force of the wrist to rub the ball.

Feel the force of your thumb and index finger when exerting force.

Very simple. Hold the racket bowl and relax the sagging, and apply the wrist force to the right and forward to the side of the incoming ball (the point of the ball) to make the wrist relax and droop into the opposite and abduction state. Do you understand? If you look at the other instructions, it's better to have a demonstration.