word how to draw a horizontal line in the blank space

There are many ways to draw a horizontal line in the blank space of Word:

First: Press Ctrl+U on your keyboard and click again.

Spaces, if you want to be longer, play more spaces.

Second: Press the three minus signs "-" and click enter.

The third way: click Insert - Shape - select the line, press Shift to draw the line.

Tap the cursor in the blank space, click the underline in the menu bar, and then hold down the space bar and the horizontal line will come out.

In Excel, you can use ** line instead, the method is to make the border line of the cell only show the lower horizontal line. Alternatively, you can insert a line segment into a custom drawing instead.

View--- toolbar--- Drawing, click on the Line command in the drawing, hold down the shift key and drag the mouse, and draw a line.

There are borders and shading that can be formatted --- with border lines, clicks.

1. Open, enter the word first, click the U key to make the text underlined. Note: computer win10 system word2010 version.

My computer is word2007, click "Insert", there is a "shape" below, select the "line" icon below is an oblique straight line, click directly in the blank space to pull it horizontally.

One way to click the underline button is to directly click on the space and the underline will come out.

Another way is to switch the input method to the English input method, and then press shift+-.

The underline of the word blank space can be achieved by inserting a straight line.

The steps of the method are as follows:

1. Open the word document you need to operate, find the illustration item in the insert tab, and click "shape".

2. Select "Straight Line" in the drop-down options.

3. In the main document, hold down the "shift" key on the keyboard, and at the same time click the mouse and slide the mouse to the right to draw a horizontal line, and you can change the horizontal line style in the shape outline.

4. Return to the word document and find that the horizontal line has been successfully drawn in the blank space, and the text can be entered on the horizontal line.

1. Click this button and click "Word Options" in the pop-up box

2. Then a dialog box will pop up, click "Advanced", find "Plate Options" at the bottom, and click this button.

4. In the pop-up dialog box, check "Add underscore to the trailing space", and then confirm 5. Look at the blank space of word again, and there will be an underline.

Made with**. Place the cursor in the appropriate position, in this case it is centered alignment, "insert", "**", point "**", select "2 1**", that is, 2 columns and 1 row; Or click "Insert" below to open the "Insert" dialog box, "**Size", "Number of Columns", "2", "Number of Rows", "1", "OK".

Enter the text "Filler" in the left column cell

Left-click to select the Filler cell with the cursor moving to the cell border, with a solid black slanted arrow.

Press Ctrl+R to align right.

Left-click to select a blank cell, click Ctrl+L to right-click the "Filler" cell, "Border & Shading", "Border", "None", "Apply to", "Cell", "OK".

Right-click a blank cell, "Border & Shading", "Border", "Custom", "Preview", double-click the "Top Border Line" button of the Tian font, click the "Right Border Line" button of the Tian font, "Apply to", "Cell", "OK".

Right-click the "Filler" cell, and click "Align Right Down" in the lower right corner of the "Cell Alignment".

Set the final effect.

Method: 1. Open the Word document, double-click the left mouse button where you need to enter the underline, and then click "U" to enter the text.

2. You can also directly select the Chinese version and click the "u" in the toolbar to set it.

Enter the text, then switch to the English input method state, press the shift+- key;

How to type out blank underline.

How to blank the word underline in a document?

Hold down the shift key and then keep pressing the minus key, and you're good to go.

Tools needed: 2016 version of Word

Steps to add underlining in the blank space of 2016 version of Word:

Click Format in the menu bar.

In Format, click on the font.

In the font, select the underlined line type (you can choose the underlined line type according to your personal needs).

After selecting the underline type, press the space bar on the keyboard to type it.

I have a blank idea line, you can start with that, uh, there's a beep in the upper left corner of it, there's a next to it, write a word on the top with a lower right side, you can just use the cool dog key.

Type first, and then, then add a sliding line on the word, if it is not even, you can use the space to fill in or use the upstairs to control it, but it is more appropriate to underline the text, personal feeling.

Click the menu view--- toolbar, --- form, click the text form field at the underline, and then click the protective form (i.e., the lock) so that others can only fill in the blanks where they need to fill in the blanks (i.e., where there is an underline), and the underline will automatically lengthen as the content increases.

If you want to type on the underline, the underline doesn't follow the movement.

The insertion method can do it. In the same way, in the insertion-shape-line, you can also draw a line yourself.

If you don't have this requirement, you can just type a space and then underscore it, but the underline will become longer when you enter the text. Word also has a function of drawing more than three short underlines and pressing enter, which will generate a whole underline, and the same typing underline does not increase, but it seems that there is no way to get it to the desired length.

This is usually achieved by adding a space to an underscore (CTRL+U), and the number of spaces is set according to the expected number of words.

This is to set the spaces to an underlined format: the underline after the filler is a space itself, select these spaces, press Ctrl+U (or select these spaces, right-click, select "Font" in the pop-up menu, and select the underline type in the dialog box).

Click on the underline in the toolbar and press the spacebar.

Tap on a row of spaces, select it, and then Ctrl+U

Here's how to play:The first step is to open the word document and select the text content to be typed, as shown in the figure below

Step 2: Select the font of the format menu, and this interface will pop up, as shown in the figure below

The third step is to select the style in the red box to determine, as shown in the following figure

Fourth, this horizontal line is set, as shown in the figure below

Open Word and create a new blank page. Just type a few words. Press the spacebar to press as long as the underline is. Select the spacebar section. Just click the "U" underline button in the menu bar

" is underlined (pronunciation: xià'huà'xiàn). Use the key after the "0" number on the keyboard, and use shift+ in English input"-"You can hit it up.

But it's not really an underline. In some documents, such as Word, underlining is often used to enhance attention.

When typing in English half-width, you can press and hold shift and - on the keyboard at the same time to type an underline without any text, which is suitable for all text software. But this is not an underline in the actual sense of the word. The real underscore is used to mark important or attention-grabbing text, also known as the underscore.

Step 1: Open the word file we need to operate, and click [File] in the upper left corner.

Step 4: Select the option to underline trailing spaces in Compatibility Options.

Hope it helps.

[Method 1].

1.Open Word 2003, enter a few words, and then switch the document to a state without an input method.

2.Press and hold"shift" +"_", press as long the underline as long as you want.

[Method 2].

1.Enter a few words in the document.

2.Press the spacebar in the blank space where you want to underline.

3.Select the area with the mouse.

4.Click "Underline (Automatically set Single Line)" in the menu bar

How to add an overline

1.Click on the "Show Scale" box on the main window toolbar and select "200%", we need to enlarge the file.

If the Drawing toolbar is not in the window, right-click the main toolbar and select Draw from the pop-up menu.

Click Plot on the drawing toolbar and select Adjust Coordinate Lines from the pop-up menu. The dialog box "Adjust Coordinate Line" pops up, remove the selection box and click "OK".

Find the block of text that you want to overline and select them.

Click the "Line" icon on the drawing bar and draw a horizontal line of appropriate length between black and white on the selected text.

Right-click on the drawn line and select the "Format AutoShape" command to set the thickness of the line.

2.Under the [Insert] menu item, select [Domain.] Enter eq "Switch" in [field**], OK.

Commonly used "switches": fraction f(x,y), root number (x,y), subscript and subscript s(u,d). For example, enter the average value of x (the superscore of x) and insert the field eq x to (x).

3.Select [Object] under the [Insert] menu item, and in the [Object] dialog box, select [Object Type] as Microsoft Equation by moving the vertical scroll bar, and the formulator box will appear, and you can insert a suitable overline in the tools provided by the formulator.

4.Press "Ctrl F9" until a curly brace appears with a gray background, enter "EQ x to (upline)" without double quotes, and then press "Shift+F9".

How to type out blank underline.

What should I do if I don't want to see this underline in word, and I will teach you to solve it in thirty seconds!

Tap the underline tool and press the spacebar.

How to blank the word underline in a document?

Here's how:

Open Word, press shift+minus sign where you need to add underline, switch to the start column, click the underline button in the upper left corner, so that the underline will appear behind the text, we can press the space at the end of the text.

Microsoft Office Word is a word processor application from Microsoft Corporation.

Word provides users with tools for creating professional and elegant documents, helping users save time and get elegant and beautiful results.

Microsoft Office Word has always been the most popular word processing program.

As the core program of the Office suite, Word offers many easy-to-use document creation tools, as well as a rich feature set for creating complex documents. Even using just word to apply a little text formatting or processing can make a simple document more appealing than just plain text.

Select a few words, click the underline button (Ctrl+U) in the upper left corner, and an underline will appear below the text.

Method steps.

Click on the "File" option in the top right corner.

Please click Enter a description.

Select Options.

Please click Enter a description.

Click on "Advanced".

Please click Enter a description.

Find "Underline the Celestial Boundary for the Tail Space" at the bottom, check it, and click "OK".

Please click Enter a description.

It is summarized as follows. Please click Enter a description.

Here's how:1. Open the Word document and check the "Start" option in the toolbar.

2. Then click on the underline option identified in the image below.

3. Then tap the "spacebar" in the keyboard to appear a blank underline.

4. If you need to add a long underline under the existing text, you can choose Chinese characters first.

5. Click the "Underline" option to add underline to the selected Chinese characters.

Commentary 1The key after the "0" number on the keyboard.

2.Add with the shift key"-"You can type it on the keyboard.

3.It can only be completed when it is entered in English"_"In Chinese, it is "—".

4.Underscores are often used in the input of names (only numbers, letters, and underscores can be entered), and in some documents (such as word), underscores are often used to enhance attention. On the other hand, on the other hand, there is an underline below the text (hyperlinks) that can be linked.

Under Office Settings Display Options, you can set the Pure Divine Simplicity to display the space symbol.

The detailed setup steps are as follows (take Office 365 Word as an example):

1) Open the Word document with Word that needs to display the space symbol;

2) Click on the file, go back to the document information interface, and click on the last option setting

3) The Word Settings interface appears, click the Show tab, check the space in the Always display the following symbols in the document area, and click OK to return to the document interface