Error 678 question about Tietong Broadband Professionals enter, hurry!!

The implication of error prompt 678 is: The remote computer is not responding.

1.First of all, confirm that the adsl modem dialing is normal, because the IP automatically obtained by the network card is not cleared, so when dialing again, the network card cannot obtain the new IP address will prompt 678, the operation method is: turn off the adsl modem, enter the network connection of the control panel, right-click the local connection and select disable, after 5 seconds, right-click the local connection to select enable, and then turn on the adsl modem dial-up;

2.If the first step is invalid, the local connection (network card) is still disabled when the ADSL modem is disabled, restart the computer, then enable the local connection (network card), and then turn on the ADSL modem.

3.If the preceding steps do not work, check whether the NIC light is on, and if the NIC light is not on, see the Dispatch Knowledge Base: Solution for "NIC Light Does Not Light Up or Does Not Clock Il".

4.If the NIC light is normal 1, 2 steps can not be solved, then lead the user to uninstall the NIC driver, reinstall the NIC driver, if the user XP system is in accordance with: knowledge number:

9973, how to set up ADSL dial-up connection under winxp method leads the user to create a dial-up connection, if the 98 system recommends that the user install rasppoe software or ehernet300 software connection.

5.If the above operation does not work, contact the telecommunications department to confirm the port.

What system is the desktop, Vista and Win7 have such a situation, try to change XP. It can be used on a laptop to prove that the network is fine, it is nothing more than a problem with the system.

It's good to install an xp3ghost version. Good computer company.

Meaning of Broadband Connection Error 678: When using ADSL dial-up, the local computer sends a request service to the terminal server through the network card, but due to a problem with the network line or computer hardware, the terminal server cannot receive or return the request data, and when the local computer cannot receive the return information, it will prompt the ** message of error 678.

Workaround for Broadband Connection Error 678:

Check if the adsl modem (commonly known as: cat) is working properly.

1.At present, most modems have panel indicators, according to the indicator light, you can judge the direction of the problem, first confirm whether the power power indicator on the panel is always on, otherwise check the power supply.

2.Then check whether the ADSL broadband signal indicator is always on (when the modem is connected to the power supply, the indicator should keep flashing until the broadband signal is detected to be normal, stop flashing, keep it on, this process is about 1 minute), if the indicator light is turned on for a long time after the modem, it still keeps flashing, you should check from the external line (between the voice splitter and the modem), this situation is mostly caused by broadband arrears, If you confirm that you are not in arrears, you should call the broadband provider's service in a timely manner**.

3.Check whether the LAN or Link indicator on the panel is always on, if the LAN indicator is always on, it means that the computer is directly connected to the modem normally, if the indicator is not on, you should check the network cable between the modem and the computer.

The flashing data indicator on the panel indicates that the computer is sending or receiving data from the terminal server, and usually when error 678 appears, the data indicator often does not light up, for the simple reason that there is no data exchange.

Check the local computer NIC settings.

After checking, if the adsl modem status is displayed normally, and error 678** still appears, you should focus on checking the local network card settings, first turn off the modem power, right-click the online neighbor, right-click the local link icon, select Disable, and then restart the computer, after the restart, right-click the local link icon according to the above steps, and then select Enable.

Remarks:1Computer hardware damage or poor contact of the network cable crystal head will also lead to error 678 prompt, you can also try to replace a new network card, crystal header, to solve the problem.

2.If you use a router to access the Internet, you should set the router to automatically dial (see: Router Settings), otherwise there may be an error 678 message.

Error 678 Meaning: The remote computer is not answering. The specific reasons are:

NIC failure; The modem is not connected; line faults; Netcom equipment failure. Solution:First check whether the network card is connected normally,Whether the two small TVs at the lower right end have small forks,If so,It means that the network card is not connected number,Please check the network cable; If it is still 678 after redialing, check if the line light on the modem is always on, if not, restart the modem, if it is not on, call 10050.

If the red-dial is still error**678, please call 10050.

First turn off the cat's power for ten minutes, then connect it, and if it is still 678, call the business **.

If the line fails, call ** and call customer service.

My family is also a tietong... Recently old and disconnected. I found a way. As soon as the line is dropped in the future, you will use Tietong's** to hit yours**, and don't pick it up (anyway, it's to let Tietong** fight).

Then you'll find that your broadband is good again...

I've been able to get rid of it. But I'm really annoying!! You can't fight every day to cure the problem... I think it's because Tietong's network is not 、、、

678 is because after the connection is dropped, the Tietong server is delayed, and your account is still on the server, but the line is disconnected. It will take a while to wait. After the server is refreshed, take your account t offline. to log in normally.

Line problem, I don't know where you are, anyway, the network cable of Tietong here in Guangdong is good garbage.

It's raining, the line is a problem, and the weather is fine. It's the same in my house, and it's useless to call someone to fix it. It is recommended that you switch to Netcom or Telecom.

The process for handling broadband connection error 678 (remote computer not responding) is as follows:

Step 1: Check whether the modem signal is normal, and restart the modem if it is not. If it is normal, see step 2.

Step 2: Ask the user if they have any software such as a firewall or 3721 Internet Assistant, and if so, suggest that the user log out.

1) Firewall and 3721 Internet assistant post-test: if the fault is solved, the cause of the fault is "user software problem";

2) If the fault still exists, enter the next step to continue processing;

Step 3: Instruct the user to check the NIC status and unplug the network cable

1) If the fault is solved, fill in: the cause of the fault is "PC hardware problem";

2) If the fault still exists, enter the next step to continue processing;

Step 4: If the conditions are met (the user has dial-up software, install the CD (win98 should have a network card driver), it is recommended that the user delete the dial-up software and, and then reinstall the network card driver and install the dial-up software

1) If the fault is solved, fill in: the fault symptom is "dial-up connection timeout", and the fault cause is "PC hardware problem";

2) If the fault still exists, enter step 7 to continue processing.

5. Error 678: The general modem indicator is abnormal, and the link light on the cat flashes (the English identification of the link light of a few cats is showtime), refer to the fault handling of the link is not on or let the user check its own firewall. If the modem indicator is normal, the reason for the failure is that the computer cannot establish a connection with the modem, the solution is to restart the modem, if it still doesn't work, it is best to reinstall the system, this problem will generally appear for a long time.