What is the height, width and length of the fire truck?

Updated on Car 2024-03-23
9 answers
  1. Anonymous users2024-02-07

    Dongfeng double rear axle blister dual-purpose fire truck size is length, width and height = 9550 2500 3400 (mm).

    Dongfeng Ruiling (2-3 tons) water tank fire truck Dimensions (mm): 6185 1980 2760.

    JMC 2 ton water tank fire truck Dimensions (mm): 6225 1980 2810.

    Isuzu. 2-3 ton water tank fire truck Dimensions(mm): 6260 1980 2780.

    Dongfeng single row 4 ton water tank fire truck Dimensions(mm): 6790 2180 2900.

    Isuzu ton water tank fire truck Dimensions (mm): 7410 2290 3190.

    Fire trucks, also known as fire trucks.

    It refers to special vehicles mainly used to carry out fire response tasks, and most countries, including China, also use them for other emergency rescue purposes. Fire trucks can transport firefighters to the scene of a disaster and provide them with a variety of tools to carry out disaster relief tasks.

    Modern fire trucks are usually equipped with steel ladders, water guns, portable fire extinguishers.

    Self-sustaining respirators, protective clothing.

    Demolition tools, first aid tools and other equipment, some will also be equipped with water tanks, water pumps, foam fire extinguishing devices and other large fire extinguishing equipment.

    Fire trucks in most areas have a red appearance, but some areas have a yellow appearance, as do some special fire trucks, which are usually equipped with alarm bells, sirens, lights and strobe lights on the top. Common types of fire trucks include water tank fire trucks, foam fire trucks, pump fire trucks, elevated platform fire trucks, ladder fire trucks, etc.

  2. Anonymous users2024-02-06

    The maximum length of the fire truck is 13.4 meters, the maximum width is 4.5 meters, the maximum height is 4.15 meters, the maximum load capacity is 35.3 tons, the maximum turning diameter is 24 meters, the minimum turning diameter of the fire engine is 10 meters, the minimum length is 5.8 meters, the minimum width is 1.95 meters, and the minimum height is 1.98 meters.

  3. Anonymous users2024-02-05

    1. The foam fire truck should use the rear side to face the fire field, quickly discharge the water, and increase to the appropriate pressure (taking the Dongfeng fire truck as an example, the pressure is when using the PQ8 gun, and the pressure is after using the vehicle-mounted gun, open the pressure water, and then open the foam tank liquid ball valve, adjust the mixer to the appropriate position, aim at the center of the flame, and spray the foam liquid.

    2. When using foam guns for close combat, the fire truck should be protected as necessary according to the fire situation. The body can be covered with asbestos cloth, and can be covered with water mist if necessary.

    3. In the whole process of fire extinguishing battle, the driver must stick to his post, constantly pay attention to the immediate margin of the foam liquid of the car, and fill the foam liquid in time. Once the foam liquid is exhausted and refilled, it will inevitably affect the entire fire fighting operation.

  4. Anonymous users2024-02-04

    Commonly used foam fire trucks are meters long and wide; The length and width of the rescue vehicle are meters; The emergency rescue vehicle is meters long and wide. The length of the ordinary fire truck is not more than 10 meters, the width is not more than 3 meters, and the height is not more than meters.

    According to our countryCode for Fire Protection Design of BuildingsStandard:

    Fire lanes. The net height of the liquid and the net grip width are not lead balances should be less than 4 meters and the turning radius.

    Generally speaking, the turning radius of ordinary fire trucks is greater than or equal to 9 meters, and the climbing vehicle is greater than or equal to 12 meters. In other words, if there are not enough roads in the community, it is very likely that the fire truck will not be able to get close to the fire.

  5. Anonymous users2024-02-03

    What is the length, width and height of a fire truck's branches?

    The length, width, and height of a fire truck is a decisive factor affecting the capacity of a fire lane. Generally, the length of fire trucks is greater than or close to 10m, the height is nearly 4m, and the width is near. Article 1 of the "Building Regulations" and Article 1 of the "High Regulations" stipulate that the clear height and width of the fire lane passing through the building should not be less than 4m, which is determined according to the external dimensions of various fire fighting vehicles used in China.

    Considering that the speed of fire trucks is generally fast, a certain safety factor should be ensured on the width of the base when passing through the building, so as to facilitate the rapid passage of vehicles, reach the fire scene, and smoothly enter the battle.

    The fire lane should be set up thoroughly, the road load is too small, the pipeline under the road is too shallow, and the ditch is selected with a light cover, etc., which can not withstand the passage of large fire trucks. In addition, as can be seen from the above table, because the body length and the minimum turning diameter of the large fire truck are too large, therefore, the return yard of the fire lane is set to 12 12m and is obviously impassable, and a larger area of the return yard needs to be set up to meet the use requirements, which should be determined according to the large fire truck actually equipped in the locality.

  6. Anonymous users2024-02-02

    The length of the ordinary fire truck does not exceed 10 meters, the width does not exceed 3 meters, and the height does not exceed the simple meter.

  7. Anonymous users2024-02-01

    The length of the fire truck is 9550mm, the width is 2500mm, the height is 3400mm, the wheelbase: 4350 + 1300 mm, the total weight at full load: 9125kg, the rated load weight: 9600kg.

    The minimum turning diameter of the fire engine is 10m, the minimum length is 5 8m, the minimum width is 1 95m, and the minimum height is 1 98m.

  8. Anonymous users2024-01-31

    The maximum length of the fire truck is, the maximum width is, the maximum height is, the maximum load capacity is, and the maximum turning diameter is 24m; The minimum turning diameter of a fire truck is 1om, the minimum length is, the minimum width is, and the minimum height is.

  9. Anonymous users2024-01-30

    The above is the standard data in the national standard GB7956.

    Authority, right?

Related questions
12 answers2024-03-23

The external dimensions of various fire trucks used in China. >>>More

2 answers2024-03-23

First, charge frequently in winter.

Develop good usage habits. Pure electric vehicles should develop the habit of charging on the same day of use. In winter, the battery has the problem of poor charging acceptance and insufficient charging. >>>More

3 answers2024-03-23

We all know the important role of tires for vehicles, especially fire trucks, and we must do a good job in daily tire maintenance. >>>More

11 answers2024-03-23

Summary. Generally three fire trucks. A foam truck, a water tanker, a rescue car. We call them the basic combat units. >>>More

7 answers2024-03-23

The width of the ramp at the entrance of the accessible building should not be less than, the width of the ramp for the indoor walkway should not be less than, and the width of the ramp for the outdoor access should be less than. >>>More