How long is the run in period of a new motorcycle, and how many kilometers does it take for a new mo

Newly purchased motorcyclesBreak-in periodis 2000 km. Generally, it is 1000 1500 kilometers, which is the basic mileage to ensure that the parts are fully contacted, rubbed, adapted, and shaped. During this period, the ability of each part of the car to adapt to the environment can be adjusted and the protrusions on the parts can be sharpened.

The quality of the car run-in will have an important impact on the life, safety and economy of the car.

The vehicle in the running-in period should try to reduce the load, the larger the load, the greater the driving resistance of the vehicle, thus, the driving force requirements of the engine are also higher, thus increasing the load of the engine.

Parts wear out quickly and are prone to defects

After leaving the factory, although the new car has been run-in, the appearance of the parts is still rough. There are also certain errors and some dangers that are difficult to find in processing and equipment. So it's like a machine that's stuck and heats up.

and leakage and other defects, endlessly.

The quality of the engine oil decreases, and the fuel consumption is large, and there are many metal particles falling between the new parts and accessories. These metal particles not only increase the wear between parts, but also reduce the quality of the oil when they fall into the oil, affecting the smoothing effect. In addition, because the new parts have a higher collision resistance during operation than in normal times, the fuel consumption will also be higher.

The above content reference: Encyclopedia - Run-in period.

The run-in period of a newly bought motorcycle is generally 1,500 kilometers.

How to maintain a new motorcycle.

1. How to change the engine oil in the primary running-in period:

Everyone should know that the motorcycle run-in period is 1500 km. There are many ways to change the engine oil within 1500 kilometers, and it is recommended that you change the engine oil according to the method of 300 kilometers, 600 kilometers, 1000 kilometers, and 1500 kilometers. Because the gear occlusion in the engine of the new car, the work of the push rod or the chain will produce waste chips, so it is necessary to change the oil frequently and excrete this waste chips in time.

And don't think about hundreds of kilometers to change the oil and add that cheap oil, this idea is not correct, no matter how many kilometers the car runs, as long as the engine is running, in the heat, it has a great dependence on the oil, so when choosing the oil, try to choose the special engine oil that the engine is matched with the first place of sale.

2. If you drive a motorcycle during the primary run-in period:

The driving of motorcycles during the run-in period is the most headache for novices, in fact, there is no need to be so harsh, after all, it is a mechanical thing, not so delicate. Just make sure you don't push too hard and don't push the speed of each gear beyond the limit of that gear. Motorcycles within 600 kilometers try not to take people and climb too steep slopes, do not let the car eat hard, just add 10 yuan every time when refueling, in order to reduce the weight of the car.

The first 600 kilometers of gear speed is maintained at 10 kilometers in first gear, 20 kilometers in second gear, 30 kilometers in third gear, 35 kilometers in fourth gear, and 40 kilometers in fifth gear. 600 kilometers to 1000 kilometers can add weight to the car, such as bringing someone who is not too fat, but try not to take someone to climb a steep slope. The gear speed is maintained at 12 kilometers in first gear, 22 kilometers in second gear, 32 kilometers in third gear, 37 kilometers in fourth gear, and 45 kilometers in fifth gear.

After 1000 kilometers of new engine oil, find a place with few good roads, and use the five-speed pulling (no more than 70kg below 150cc, no more than 80kg above 150cc) to ensure that the time is about 30 seconds. Then it is still necessary to return to the normal run-in state. The gear speed is maintained at 15 km/h in first gear, 25 km/h in second gear, 35 km/h in third gear, 40 km/h in fourth gear, and 50 km/h in fifth gear.

At 1200 km, pull back to the highway. At 1500 kilometers, ride to the after-sales service, clean the air filter (if it is a paper air filter, it can only be replaced) and the oil filter element, release the oil, and clean the engine (after the engine is cleaned, the cleaning liquid in the engine must be dried and then add new oil). Then find a professional to inspect and correct the car, and end the primary run-in stage of the motorcycle into the final run-in period.

Note: Check the condition of the chain every 500 kilometers to see if it is loose and whether there is a lack of oil.

Do not wash your car within 1500 km.

The run-in mileage of the new motorcycle is about 1600 kilometers, during the run-in period of 0-500 kilometers per hour speed can not exceed 45 kilometers, can change the first oil, 500-1000 kilometers per hour speed can not exceed 55 kilometers, change the second oil, 1000-1600 kilometers per hour speed can not exceed 80 kilometers, change the third oil, after every 2000-2500 kilometers or so to change the oil, the motorcycle produced by the famous brand factory can change the oil according to the speed mileage, and the miscellaneous car should shorten the mileage of changing the oil. New cars should pay attention to the throttle acceleration should be smooth, not slamming or decreasing the throttle, and the gears can be appropriately added or decreased due to road conditions to ensure that each gear can be fully run-in. In fact, it is not that it is not possible to carry people during the run-in period, and it is still no problem to carry a person at 125cc, but it is best not to overload, pay attention to riding for a period of time, and adjust the chain to the appropriate tightness.

The run-in period is 2000 km.

300, 600, 900, 1200, 1500, 2000 km to change the oil sequentially. When changing the oil, check the fasteners of the whole vehicle to see if they are loose. Try not to load it during the run-in. Do not exceed 6000 RPM!

The new car should not run too fast or accelerate sharply, can not carry too heavy, the speed should be maintained at 40-50 economic speed, buy special engine oil for motorcycles, Honda special is better, to buy regular stores, do not buy fake.

Summary. The run-in period of the new motorcycle is about 300-500 km; The so-called running-in period is mainly to break in the gap between the various parts of the engine; Nowadays, the industrial technology level of motorcycles is getting higher and higher, and the accuracy of engine parts and machining is becoming more and more precise; In addition, the motorcycle must drive at a constant speed during the run-in period, try to avoid overloading and hill climbing, do gentle driving, remember not to operate violently, speeding, otherwise the service life of the engine will decrease accordingly.

At the same time, the first maintenance of motorcycles is generally about 500-800 kilometers; The first service program requires an oil and oil filter change, and the first service program in place will ensure that your motorcycle performs at its best and lasts longer.

How long is the run-in period for a new motorcycle.

Hello and thank you for your patience. The run-in period of the new motorcycle is about 300-500 km; The so-called running-in period is mainly to break in the gap between the various parts of the engine; Nowadays, the industrial technology level of motorcycles is getting higher and higher, and the accuracy of engine parts and machining is becoming more and more precise; In addition, the motorcycle must drive at a constant speed during the run-in period, try to avoid overloading and hill climbing, do gentle driving, remember not to operate violently, speeding, otherwise the service life of the engine will decrease accordingly. At the same time, the first maintenance of motorcycles is generally about 500-800 kilometers; The first service program requires an oil and oil filter change, and the first service program in place will ensure that your motorcycle performs at its best and lasts longer.

How many kilometers to drive during the break-in period of the motorcycle.

It's about 500 kilometers.

How much speed does the motorcycle drive during the break-in period.

The first 300 kilometers are the most important, the speed should not exceed 40, and the speed of the gear handlebar should be controlled below 3000 rpm. Be patient, as this is a critical period for the piston rings and cylinder block to be run-in. The reason is simple. Component wear can only be used by subtraction, not by addition.

Can the motorcycle be speeded after the run-in period?

Don't pull the top speed as soon as the run-in period passes, the top speed is meaningless except for the danger, the car can occasionally pull the high speed, and don't drag the gear for daily driving.

How much oil should be changed during the break-in period of CM500?

The main function of the oil is to reduce friction and wear on moving parts, as well as to remove sludge (one of the functions of dispersants) and paint (detergent) from the engine, it also neutralizes acids (cleaning agents) from the oxidation of fuels and lubricants, improves the tightness of the piston rings, and cools the engine by taking heat away from the moving parts.

How much speed is appropriate for CM5oo during the run-in period?

It's good to pull and pull the speed occasionally, and it's okay to stabilize it at 40-60 at ordinary times.

How many kilometers is the best time to drive CM500 to change the engine oil for the first time during the break-in period?

Change the oil for the first time at about 1000 km.

The general run-in period of a newly bought motorcycle is 1500 kilometers, which is explained in the manual.

The motorcycle run-in period is 1500 km. There are many ways to change the engine oil within 1500 kilometers, according to the method of 300 kilometers, 600 kilometers, 1000 kilometers, and 1500 kilometers. Because the gear bite in the new engine, the ejector rod or the chain work will produce debris when the socks collide, so it is necessary to change the oil frequently to excrete this debris in time.

After each new motorcycle leaves the factory, due to the small matching gap between the various parts of the engine, the rough moving surface needs a running-in process to achieve the best fit between the gears and gears, between the piston and the cylinder, and between the shaft and the bearing. The run-in period of the new car is 1500 km, but to make the engine fully run-in should be 1600-2000 km. 2. Precautions for the run-in period:

The maximum speed should be controlled during the run-in period. The general driving speed should be 60 kilometers U002F hours below the speed of variable speed driving, to avoid driving at the same speed for a long time, should be appropriate driving in different speed sections.

The run-in period of the new car is 1500 km, but to make the engine fully run-in should be 1600-2000 km. After each new car leaves the factory, due to the small matching gap between the various parts of the engine and the rough moving surface, a running-in process is required to achieve the best fit between gears and gears, between pistons and cylinders, and between shafts and bearings.

It is best to change the oil for the first time in a new motorcycle for 300 kilometers, because there will be a lot of metal and iron filings mixed in the oil during the run-in period, and the oil filter can not filter it, and it is randomly transported by the oil pump on the surface of each friction, which accelerates the wear of the friction surface.

The second oil change was 600 kilometers, and a small amount of iron filings could be seen in the oil changed the second time, but it was much less than the first time.

The third oil change is at 1000 kilometers, and it is basically difficult to find iron filings in the oil after the change. After the run-in period is completed, if the mineral oil is used every 1500km, the semi-synthetic and fully synthetic engine oil can be appropriately extended to about 3000km.

All gears should be run-in, don't go all the way in one gear, the speed is below 60, it is best to be at 40, keep 3000 kilometers of primary running-in, and 5000 kilometers of all running-in.

The speed does not exceed 5,000, the speed of 40 per hour at the highest gear speed will not exceed 5,000, and the oil kilometers and 1000 kilometers are changed once.

It is good to change the engine oil frequently during the run-in period, and after the run-in, you can change the oil about every 1500 or so, as well as change the air filter.