I want hydroponic ordinary wild bamboo! I want to open a hydroponic plant shop, but I don t know how

Bamboo belongs to the grass family, which seems to have a tough and rigid stem, but in fact, it is a member of the same family as many grasses such as early maturing grasses, which is nothing more than in the process of evolution, its cellulose is more and more developed, so that the stem gradually evolves into lignification, so that it can be used by people in a variety of bamboo processing products. However, it is still relatively close to grasses in many physiological and ecological traits, so it can also be used"Giant's Grass"or"Giant of Grass".Because of its close relationship with grasses of the grass family, it is more adaptable to water than many other woody species, in addition to its hollow stem that provides a well-developed aeration tissue for oxygen metabolism of the plant, and its whip-like root is also more water-suitable than ordinary lignified plant roots.

It is because of the above-mentioned genetic relationship, so the induction of bamboo root maintenance is very easy and convenient, even if the water is not changed for a long time, it will not cause root rot, @@所以水培的竹子养护比其他木本类植物要容易得多, is a good variety of hydroponic induction @@@特别是一些丛生的观赏竹, after the use of induction technology for hydroponics, the ornamental is excellent, and it still has a unique style in the market. The main attention is to the roots should be in contact with both water and air so that the roots will not rot.

There are hydroponic bamboo sellers on ah.

I'm afraid not, bamboo grows new plants from underground stems, and in hydroponics, the bamboo whip is not pressed by the soil, and new bamboo cannot grow.

It stands to reason that you can, but you haven't planted it. You can use a transparent container that is not watertight, use ceramsite or pebbles to cultivate, and the bamboo should be washed roots, pruned, and sterilized before cultivation. Don't add too much nutrient solution, touch the bottom root 1-2 cm is enough, with the increase of roots, the nutrient solution should also slowly decline.

OK. Shake the soil clean and put it under water to wash it.

You open a hydroponic plant shop, the most important thing now is to be able to distinguish between real and fake hydroponics, as for **, it is decided according to the size, variety, quality, and state of the flowers.

There are a lot of hydroponic varieties, what do you say.

It should be a lily bamboo mill bureau. Take a look at this lily or swim xun bamboo**. Below is the hydroponic monarch orchid.

Probably eaten or dragged away by rats? Rats have a habit of eating coriander and copper coriander.

Your plants can be hydroponic, put stones or water, hydroponics is not nutritious, it is best to buy some nutrient solution online, add it once every two or three weeks, less less, not too much.

Iron tree in the hydroponic flower base to remove all the native roots, after a long time of water environment cultivation, can make the iron tree fully adapt to the water environment, this cultivation method will slowly popularize, hydroponic iron tree will enter thousands of households in the future.

Hydroponic iron trees are not difficult because the leaves of iron trees are slow to release water, and iron trees also have thick stems, which retain enough nutrients to reroot.

But why do many people still think that iron trees are difficult to cultivate?

One is because the root removal is not complete. Nowadays, many friends just don't dare to cut the roots, and the habitual thinking thinks that the roots are the root of the grass and trees, and the tree cannot live without roots. It is true that a tree cannot live without roots, but the first step in hydroponics is to cut off the roots and let them grow new roots before they die.

This is called putting it to death and then being born. But if you don't cut the old roots, the new roots won't grow.

Of course, different plants have different methods of cutting roots, as I said earlier, the leaves of the iron tree emit water slowly, and the iron tree also has a very thick stem, which preserves enough nutrients to re-root, so the roots of the iron tree, you just need to cut it, you can cut it all the way to the root.

The second is because the mud removal is not thorough. First of all, it is necessary to preliminarily rinse, and after the substrate reveals the shape of the roots, the roots are pruned. The root system of the iron tree is well developed and strong, which is difficult to wash and difficult to clean.

So after the foundation is cut, it is almost easy to wash, you have to be patient, little by little to wash all the mud between the roots, the cleaner the better, because if there is soil, it will rot the roots in the future, which is a big taboo.

The third is because the disinfection is not thorough. The reason why it is called the iron tree, the wood is naturally very hard, so the concentration of disinfectant should be slightly higher, but not too high, too high will burn the foundation. Or use the general concentration, but the soaking time is longer, and the depth of soaking is that the foundation is still up to one centimeter.

Thorough disinfection is the most important thing.

Fourth, the concentration of acclimation solution is insufficient. After the acclimation solution is configured, the number of drops added is doubled, and the time is also doubled, which is not counted, and it is generally re-domesticated every three days. The time for domestication is two days and two nights.

But it can't be more than this time, and you must change the water. The time of soaking in water is more than three days, within ten days, and then acclimation, and soaking for three days and then acclimation for two days can also be. With the extension of time, the time of soaking in water can be slowly extended.

The acclimation solution is half a centimeter of the base of the first contact.

Fifth, the mental waiting time is not enough to prepare. That's a reason I made it up, haha. The time it takes for an iron tree to grow new roots is naturally much longer than that of herbs, which take almost ten days to grow roots, while iron trees only take more than 60 days, or even longer.

So you have to be mentally prepared.

The iron tree is evergreen in all seasons, and it can live well in winter, so you can cultivate some iron trees, one can be used as the treasure of the town store, and the other can be sold at a good price in winter to make up for the lack of herbs in winter.

The iron tree is easy to cultivate, but it takes a long time, so the cultivated iron tree must not be sold cheaply, even if it is placed in the store, it can attract popularity.

You can bai, for example, the hydroponics of the Brazilian iron tree. Zhi should be drip wax on the upper incision, and disinfect the lower incision, if there is no proprietary wax, the upper section can be coated with paint instead. The length of a section can be controlled by yourself, and a section within 10 cm to 15 cm can be controlled.

The bud position of Brazilian iron is tighter, and there will be a bud position every three centimeters, which can be divided and sawn equally, so you don't have to worry about no bud position.

As for the water, the dried tap water is completely OK, preferably pure water, but the cost is too high, and any water must be added hydroponic plant nutrient solution, which is bought on the market, a few yuan a bottle, which can be used for a year to promote growth and robustness.

I don't have wax, can I use paint instead? Hydroponics of the Brazilian iron tree. The upper incision should be dripped with wax, the lower incision should be disinfected, and if there is no wax, the upper section can be coated with paint instead. The length of a section can be controlled by itself,10

It is okay to bring the roots and cut them off to soak in water.

The advantage of switching from soil culture with roots to hydroponics is that the time to slow down the seedlings is reduced, and the roots will absorb nutrients directly from the water.

Basic steps: 1. Prepare the sun-dried water.

2. Depot the pothos, shake off the planting soil, and rinse the planting soil attached to the root system with water.

3. Put the rinsed pothos into the tray of the hydroponic container, and then put it in the hydroponic container. Add the sun-dried water and you're done.

4. Note: Each step should be operated gently, so as not to hurt the root system, and the germs will take advantage of the weakness to enter, causing root rot. The frequency of water change in the early stage should be more diligent, and after a period of hydroponics and new roots grow, you can add nutrient solution, and pay attention to the best use of sun-dried water when changing water.

You can cut it and put it directly in clean water, and you can grow new roots after a while. After cutting, prune it, preferably leaving only 3-5 leaves on each root to reduce nutrient consumption and promote the growth of new roots.

Yes, but the former can't hurt the roots.