What to do if the gas stove is tempered How to deal with the gas stove tempering

The tempering of the gas stove, also known as "discharge", is the combustion phenomenon of the flame retracting into the inner cavity of the stove and the "deflagration" of the stove spray.

Tempering elimination method.

1) If the bottom of the pot is pressed to the point where the temperature of the burner head (nozzle part) is too high during cooking, causing backfire, then try to raise the position of the pot.

2) Because the stove nozzle is blocked by dirt and debris, which reduces the gas flow and causes the backfire, then the stove nozzle should be cleaned to make it unblocked.

3) Because of the large amount of air, that is, the damper is too large and the backfire is caused, then the low fire should be turned off, the damper should be adjusted, and the hose should be checked.

If none of the above reasons are or there is a flashback, it should be considered that the furnace has a problem and should be solved by a dealer or professional maintenance personnel.

When the gas stove is tempered, please check whether the flame separator is in a smooth fit. Enlarge the damper.

Generally, there is a lot of rust in the gas stove, which affects ventilation. Remove the fire base and pour out the rust.

The gas outlet of the gas stove is semi-blocked, so you can close the gas cylinder, flip the gas stove, and use a steel wire (sewing needle). Go back and forth to the gas outlet of the gas stove.

If you are an expert, you can also unscrew the gas outlet nozzle to clean it.

If the oxygen is not enough, turn the air outlet at the bottom of the furnace a little bigger, and if it is a furnace cabinet, you can also open the door of the furnace cabinet a little to help.

In the event of backfire of the gas stove, the gas valve should be closed immediately, and then the fire should be re-ignited to avoid burning the stove;

No one is allowed to live in a house with gas facilities.

1. If the tempering is caused by the damper being too large, you can adjust the damper to restore the incoming air to normal, so that the flame will return to normal.

2. If it is caused by low gas pressure, it is usually necessary to adjust the opening of the angle valve, and check whether the pressure reducing valve is blocked by foreign matter, and if there is a blockage, clean it up in time, so that the pressure problem will be solved.

3. When the actual gas source composition changes, resulting in tempering, the gas stove should be transformed according to the local situation to ensure that the gas source is consistent with the gas source required by the gas stove.

4. The fire hole of the burner is blocked, resulting in backfire, the dirt can be cleaned up, reinstalled, and troubleshooting.

5. If the external air flow blows directly into the burner and causes backfire, you can close the door and window to reduce the indoor airflow and avoid the wind blowing the burner, so that the problem can be solved.

6. Due to the high temperature of the fire cover, resulting in tempering, the distance between the fire cover and the bottom of the pot should be adjusted to reduce the burning speed of the flame and maintain the combustion heat balance.

How to deal with the backfire of the <> gas stove: the gas source pipeline, pressure reducing valve, burner nozzle, and fire are blocked by the dregs, carbon black or other substances of Fanlai, and the gas pressure in the liquefied gas cylinder is insufficient, which will reduce the gas outflow rate and cause backfire, at this time, it can be avoided by cleaning up the dirt and inflating.

This answer is applicable to most brands of gas stove models such as Wanhe, Boss, and Yingxue.

1. This phenomenon is a tempering phenomenon, check whether the gas source specified on the nameplate of the gas stove is consistent with the actual use. Check whether the burner is deformed and damaged. Professionals should be invited to inspect and repair to eliminate all potential safety hazards. Be.

2. There are impurities in the gas (such as rust and small particles of foreign matter), which affect the gas flow pressure in the process of gas transmission, causing the pressure in the gas stove transmission pipe to fluctuate and weaken, and the instability leads to a strong "bang" sound of internal air vibration. Or there are small insects, rice grains and other debris through the flame separator on the stove head into the inside of the stove. In this case, it is only necessary to detect whether there is a foreign object in the gas pipe and clean it up in time.

Precautions for the use of gas stoves:

1. Clarify the gas source. After installing the gas stove, be sure to read the product manual carefully before use. In order, open the valve in front of the stove on the gas pipeline, and then press the ignition device.

2. When using gas, be sure to leave someone next to take care of it, pay attention to the burning situation at any time, and adjust the flame according to the cooking situation.

3. In the process of using the gas stove, if you find that the fire is off, turn off the switch immediately and open the doors and windows for ventilation. When there is no smell of gas, find out the cause of the flame, and then re-ignite the fire after proper treatment.

4. Before stopping the use of gas or going to bed, check whether the gas appliance switches are all turned off. Closing the main valve on the gas meter, opening the kitchen window, and closing the kitchen door to the bedroom are the safest and safest practices.

5. If the hose connection method is used between the gas stove and the pipe, it is necessary to check whether the hose is damaged, aging and leakage. Apply it with soap, and the point of continuous blowing of lead is the point of air leakage. The service life of the hose is generally 18 months, and the ruler should be replaced in time when it is aging to avoid accidents.

Now most of the kitchen is cooking with gas stoves, which are used with open flames, because jujube celery must pay attention to its own safety when using, and once the abnormality is found, it is necessary to find the cause and solve it as soon as possible. Recently, many people will ask such a question: gas stove tempering, so what happens to gas stove tempering?

Many factors in daily life can cause gas stoves to backfire, and it is necessary to carefully investigate to find specific solutions.

1. When we use the gas stove, if the fire disturbance and demolition force of the slow rock jujube is insufficient, so that the wind plate will be adjusted, which will increase the air coefficient of the gas stove. If the air coefficient is too high, the flame will spread faster, and then the tempering situation will occur.

2. In addition, if the pressure of the gas is too low, it will also cause backfire. The cause of the abnormal gas pressure may be that the nozzle of the pipe or burner is blocked, which needs to be cleaned and dredged.

3. Because the gas stove is used to fry and cook food, if there is sometimes improper operation that causes soup and oil-stained vegetable residue to fall into the stove, it may block the stove eye, and if it is not cleaned out in time, the stove eye will be blocked, so that there will be abnormal conditions when the gas stove is used.

4. When the quality of the gas is abnormal, the combustion of the gas is not very good, the gas stove generally has a self-protection device, when the situation is different, the self-protection device will be started, and this may cause backfire. In fact, if the daily maintenance of the gas stove is good, it can be cleaned regularly, and there will generally be no abnormal problems, unless it is a long service life, some parts are aging and cannot be used, and new parts need to be replaced or replaced with new stoves, which depends on the specific situation.

The above is a general introduction to the problem of "gas stove tempering", here I also want to remind you that there are many faults of gas stoves that non-professionals can not deal with, if necessary, it is recommended to ask a professional maintenance master to deal with it, for our personal safety considerations, do not blindly disassemble the gas stove.