iphone4s mobile MMS settings, there is no APN setting for cellular data on the phone, thank you hero

Hello, you enter the mobile phone menu, select "Settings" - General "- Cellular Mobile Network" - Cellular Mobile Data Network", and enter "CMWAP" at the APN of MMS; mmsc"; MMS **"; Maximum MMS message size: 307200; Other fields do not need to be filled in or changed. Restart your phone after the setup is successful.

Please refer to it.

iPhone4S mobile phone uses Unicom 3G card is the default Internet access parameter, no need to set. It is only set when using a mobile card. If you have set it before, you can go to Settings-General-Restore-Reset Network Settings.

The APN setting is generally set by default for iPhones, if not, you can set it as follows:

1) Set up the universal network cellular data network - APN-UNINET, 3GNET or CMNET;

2) Set General Network Cellular Data Network Username and password are blank;

3) Set the General restriction, set Safari (iPhone dedicated browser) to on, other options arbitrary.

Hello, what is the system of the mobile phone if there is no APN then what is the first one after turning on cellular data.

1) Find the Internet switch position: enter the "Settings" - "General" - "Network" menu.

2) Turn on the "Cellular Data" switch: (Operation method: click the switch icon and slide to the ON state), otherwise you will not be able to access the Internet or send and receive MMS messages after the setting is successful.

3) How to set up Internet and MMS: Go to "Cellular Data Network" and enter the parameters of Internet and MMS.

Parameter content. Internet access parameters (above): APN: cmnet Username: Null Password: Null

MMS parameters (below): APN: CMWAP Username: Null Password: Null.

MMSC: MMS**::80

Maximum MMS message size: 102400

mmsc ua prof url: null.

Have you tried turning on airplane mode or turning it off?

mmsc：

MMS**::80

I'll fill in these two, and I won't fill in the others, so you can try it.

Unicom card inserted into the Apple mobile phone is generally to automatically set the network parameters, if you can't use the network now, 1, it is recommended to restore the network settings, tap.

Set > General > Restore, then scroll down and tap Reset Network Settings. (Note: This clears the current cellular network settings, including saved network settings and VPN settings.) ）

2. Reseat the SIM card.

1) Remove the SIM card by inserting one end of the SIM ejection tool (or small paper clip) into the small hole in the SIM tray.

2) Press firmly and push down until the tray pops out.

3) Gently remove the SIM card from the tray and reset the SIM card into the bay.

4) Load the cradle into your iPhone and push it until it is completely reinserted.

3. To restore your iPhone, first make sure you are using the latest version of iTunes. Next, connect your iPhone. In the left column under "Devices," tap your iPhone, then tap "Restore" in the "Summary" tab.

Hello! It is recommended to try restoring the network settings.

iPhone MMS parameter settings: Please enter the home page through the home button and select "Settings" - "General" - "Network", enter the "Network" setting interface - select "Cellular Data Network" - select APN under "MMS" to set to 3GWAP, and then select "MMSC" to enter the MMS service address: , "MMS**" input:

It can be set to 10240 or 10240, but the larger the capacity, the longer the sending time.

Set it up on a cellular network.

The cellular data APN is: CMNET

1. First of all, the user needs to enter the settings option, find the general - network - cellular data network, and then find the two input boxes.

2. Then to set up CMWAP and CMNET, it is best to call ** to 10086 before setting, and ask if your GPRS** includes both CMNET and CMWAP.

3. If you include both CMNET and CMWAP, you can directly enter the uppercase CMNET in the APN option, and then restart the phone.

4. China Unicom's user settings are similar to those of China Mobile, open "Settings-Network-Enable 3G", turn on data roaming, cellular data network APN input 3Gnet or 3GWAP or Uninet, open Safari, log in**.

China Unicom iPhone 5 is actually the WCDMA version of iPhone 5, users can send and receive MMS messages in Settings - General - Network - Turn on cellular data and MMS functions. If not, you can refer to the following data (settings--- general --- network ---cellular data network).

Cellular data: -APN: 3GNET

Username: Optional.

Password: Optional.

MMS: -apn: uniwap

Username: Optional.

Password: Optional.

MMS**: The maximum MMS size: 102400 can be left out or filled in (in case the MMS is too large to be sent).

Others can be omitted.

- Mobile iPhone 5 MMS 2G Internet setting method.

The domestic iPhone 5 does not support the mobile TD-SCDMA 3G network, but if you are a die-hard mobile fan, you can still use the mobile 2G network to send and receive MMS messages and surf the Internet, but the network speed is slower.

The specific method of setting up MMS and GPRS Internet access for iPhone 5 users using a mobile card is as follows:

Cellular data: -apn: cmnet

Username: Optional.

Password: Optional.

MMS: -apn:cmwap

Username: Optional.

Password: Optional.

MMS**: The maximum MMS size: 50,000 can be omitted or filled

Others can be omitted.

- Telecom iphone 5 MMS 3G Internet setting method.

Telecom contract licensed iPhones generally do not need any settings to send and receive MMS messages normally, but the size of MMS messages is limited, and if it is too large, it will fail to send.

The specific method of setting up 3G Internet and MMS for Telecom iPhone is as follows:

Cellular data: -apn: ctwap

Username: Password:

MMS: -apn:ctwap

Username: Password:

MMS**::800

Maximum MMS size: 50,000 or 50,000

The above are the settings for the network and MMS under the three major operators, when everything is set up step by step, the user needs to turn on and off the airplane mode again or restart the phone to make these settings take effect.

Apple mobile phones should be divided into mobile and Unicom cards, and different card settings are different.

MMS settings for Unicom card:

apn：uniwap

Username: Optional.

Password: Optional.

MMS**: The maximum MMS size: 50,000 can be omitted or filled

MMS settings for mobile cards:

apn:cmwap

Username: Optional.

Password: Optional.

MMS**: The maximum MMS size can be filled in at will, but with 1000

Steps for APN Setup:

Click to go to Settings.

Tap to enter the cellular data network.

Set cellular data to On.

Tap to enter the cellular data network.

Enter the cellular data network as follows: Cellular Data --APN: CMNET, and leave the username and password blank.

Another way is to restore the phone directly, that is, Shuangqing, but you have to back up the data in advance to avoid data loss.

The following takes Apple 6 and 6P as an example to illustrate the specific setting method:

1. Find [Settings] on iPhone6 and iPhone6 Plus and click to enter.

2. Find [Cellular] under [Settings] and click to enter.

3. Enter [Cellular Network] and turn on [Cellular Network].

4. Go back to the [Settings] of your phone and click to enter it.

5. After entering [Messages], find [Send and receive MMS] in [Message Settings] and open it.

The mobile phone uses Unicom's 3G card, which is the default Internet access parameter, and there is no need to set it. It is only set when using a mobile card. If you have set it before, you can go to Settings - General - Reset - Reset Network Settings.

Generally, the APN settings have been set by default on mobile phones, if not, you can set them as follows:

1) Set up the universal network cellular data network - APN-UNINET, 3GNET or CMNET;

2) Set General Network Cellular Data Network Username and password are blank;

3) Set the General restriction, set Safari (iPhone dedicated browser) to on, other options arbitrary.

Minghui voyage (good boy, let him go on a voyage).

You can look for this thing on the Internet, and there are a lot of them!

If you are sure that there are no errors in the settings, then it is a network problem, and here is how to see what caused it and fix it:

1. There is no mobile data function turned on: MMS messages need to have a network to send, note that the network here does not refer to a wireless network but a data network, if the wireless network is turned on, turn off the wireless and then turn on the network connection and then click to send.

2. Mobile phone arrears: MMS messages cannot be sent in arrears, please recharge.

3. Network delay or poor signal: Network delay will also cause temporary inability to send MMS, turn on airplane mode for about 5 seconds and then turn it off, or connect to the network in another place before sending.

Hello, we recommend that you perform the following troubleshooting.

Step 1: Check the Internet access parameters.

Go to Settings - General - Network and check whether the cellular data switch is turned on. Or before the call, there is no capital "e" on the right side of the China Mobile logo.

Confirm that the APN column for cellular data is "CMNET".

Step 2: Confirm if there is a "profile".

When you install a network-related application, such as a banking client or other third-party VPN tool, you may automatically install a profile. Some profiles are likely to affect your ability to surf the web and are recommended to be removed.

Step 3: Confirm whether the carrier patch is installed.

The operation of jailbreaking the iPhone does not directly affect the Internet access function of the mobile phone, but some users cannot access the Internet after jailbreaking, and then install the carrier patch, even if the operator patch is installed, there are still problems with the Internet.

In this case, we recommend that you delete carrier-related patches, restore network settings, and set up the access point again.

To reset network settings, go to Settings > General > Restore > Restore network settings.

Thank you for your understanding.

The licensed goods with the Hong Kong version can not fill in the APN, open the cellular data and go directly to the Internet, you can also fill in, CMNET

After reflashing the licensed goods with the Hong Kong version, activate it with a normally used card, and that's it. Normal, safe to use.

Generally, the mobile phone will fill it out for you by default, as long as you can access the Internet.

How it was, now that's it, leave him alone!