How do you make a handmade pen holder?

Materials: corrugated cardboard (cardboard for small electrical appliances or fruit boxes, partitions, etc. can be used), wrapping paper, transparent tape, double-sided tape, white glue, iron wire, beads.

5cm+ is wide and high, and it is combined into a drawer with scotch tape, and the bottom is added to make two.

6cm + 10cm + 10cm + 10cm + for width, 10cm for height, combined with scotch tape to form the main body, stuffed into the "back" cardboard.

4. According to the size of the main body, make two "drawer partitions", fold them inward into an N-shape, and coat the side with white glue to fix it.

The roof is made out of cm + 8 cm wide and 13 cm high, and the pen holder can be inserted at one side.

6. Glue a piece of cardboard at the bottom of the main body to make the thickness consistent, the wrapping paper is first pasted on the periphery of the main body, cut at the corner, paste the inner wall of the main body inward, cut the four corners, paste the side inward first, and then paste the front and back, and paste the top properly in the same way.

7. Cut a square wrapping paper and stick it on the upper end of the main body, cut it with a knife, paste it inward in order, and then stick it to the bottom.

8. The roof, drawer, and pen holder are pasted with wrapping paper respectively.

9. Drill 2 spacing holes in the front of the drawer, take 3 beads and beads and insert them into the wire, penetrate the drawer from the front, fold it inward in the drawer, and fix it with tape.

10. The roof is fixed on the top of the main body with double-sided tape, and the pen holder is fixed in the recess position with double-sided tape, and it is completed by stuffing it into the drawer.

The ultra-simple handmade pen holder is not only beautiful but also usable.

1. Fold the pair horizontally twice, as shown in the figure below.

2. Fold twice in the vertical pair, as shown in the figure below.

3. Then fold the four corners, as shown in the figure below.

4. According to the creases, both sides are folded inward, as shown in the figure below.

5. Then plug the two sides together to form a triangle, as shown in the figure below.

6. Stack six of the same in the same way, as shown in the figure below.

7. Put together to form a hexagonal shape and fix it with tape, as shown in the figure below.

8. Take out a piece of paper and make it into the bottom, as shown in the picture below.

9. Finally, cover it on the paper tube, and the adhesive tape can be glued firmly, as shown in the figure below.

Materials required: scissors, utility knife, empty beverage bottles, the specific steps are as follows:

1. Remove the outer wrapping paper of the beverage bottle, and then use a utility knife to cut it in 1 3 places on the beverage bottle.

2. Use a utility knife and scissors to trim the incision of the beverage bottle to prevent the burrs from pricking your hands during use, and trim them neatly.

3. Take the incision as the starting point, and use scissors to cut the bottle into vertical strips, with a width of 6 mm and a length of about 4 cm.

4. Press down the cut plastic strip horizontally so that it is perpendicular to the beverage bottle.

5. Select a vertical bar and fold it to the left, and the top of the vertical bar is opposite to the edge of the third vertical bar to the left.

6. Continue to fold the cut vertical bars in the way of step 5 in turn until all the vertical bars are folded.

7. After all is completed, put in the pen and start using it.

Answer: I first poked a hole under the lid of the can with scissors, and then cut a circle along the hole to cut the lid off. Be careful when cutting because the opening is very sharp. I use the part below to make the pen holder.

I found colored tape and glued all the cuts on. Then I cut out a blank piece of paper compared to the size of the can, on which I drew a picture of a flower fairy, glued my favorite sticker, and then glued this picture full of patterns to the pen holder with double-sided tape, and a beautiful pen holder was made.

Creative handmade – transform discarded cans at home into beautiful pen holders.

The ultra-simple handmade pen holder is not only beautiful but also usable.

How to make a pen holder by hand? In fact, in our life and production, if we can use our brains and use the tools and waste items around us, we can make exquisite and practical things. Here's how to make a pen holder by hand, and you're welcome to share it.

Material:

Including denim scraps, sealing adhesive paper cores, paper pattern kraft paper leftovers, leftover tags, etc., basic factory scraps.

Step-by-step tutorial:

1. Find two 2-and-a-half-inch sealing tape paper cores, which are available in the packaging department, and glue them up and down to make the blank of the pen holder.

2. I found some flower patterns on the Internet for reference by car flowers.

3. Find a piece of washed denim in the board room, denim after washing, color and style can be varied, I selected a whitewashed light-colored cloth, a little elastic, intended to embroider royal blue thread, is expected to be an imitation blue porcelain effect, and then use a ruler to measure the surface length and width of the pen holder core data, according to which cut out a piece of cloth with a reserved paper mouth, with the line on the real size of the first car a frame, in order to control the size of the pattern.

4. Patterns embroidered with electric flat cars.

5. When making the second pen holder, because I choose thin denim, I have to iron the fabric with an iron after cleaning the embroidery pattern with water.

6. Use the jeans tag and the kraft paper used for the paper pattern to make the bottom of the pen holder.

7. According to the circumference length of the paper tube, sew the jeans well and put them on the paper core.

8. Glue the cloth tightly to the paper tube.

9. Use the cloth tag of jeans to frame the outsole and inside of the pen holder, so that the pen holder is basically done.

The practice of the pen holder is as follows:Tools Raw material: square colored paper.

1. Fold the square colored paper on opposite sides.

2. Fold two of the adjacent corners towards the midline.

3. Fold the opposite side towards the midline.

4. Fold the left and right sides to the midline.

5. Glue it with glue to make it look like a three-dimensional body.

6. Make a total of 6 identical shapes in the same way.

7. Then glue them all together.

8. The pen holder is ready.

The steps to make a handmade pen holder are as follows:

1. Choose three pieces of red paper and three pieces of blue paper, and you can also choose the color of the paper according to your preferences.

2. The manuscript infiltrates the two opposite sides of one of the papers, and then disassembles them, and then overlaps the two sides with the creases just formed, as shown in the following figure

3. Do the same on the other two sides, and then we will make it completely, and then four small triangles will be formed on the four corners. As shown in the figure below:

4. Then we fold it along the two broken lines near the edge towards the middle of the key infiltration ridge to form a rectangle as shown in the figure below.

5. Turn it over, and then also fold the edge part to the middle along the two folded lines near the edge to form a small square.

6. Stand up the square, and then insert the interface according to the method shown in the figure below, <>

7. After the insertion is complete, it forms a triangular prism as shown in the figure below.

8. Fold the remaining paper into a triangular prism.

9. Coat some glue on the smooth surface of one of the triangular prisms, as shown in Figure 1 below, and then select a blue triangular prism, glue the smooth surface to the mold, and fix it.

10. Then we glue all the remaining triangular prisms on it, and after doing it, it will be shown below

11. Next, you can put in our pen, isn't it quite simple and practical?