What is the terrazzo floor method, the ground terrazzo formula?

It is usually carried out in accordance with the process of bottom treatment, alignment, terrazzo slab soaking, mortar mixing, bottom watering and brushing cement slurry, laying cement mortar contact layer and prefabricated terrazzo slab, maintenance and grouting, sticking baseboard, pickling and waxing.

1. Bottom treatment: smash off the mortar (or scattered concrete) and slurry skin that are bonded to the bottom layer, and clean the floating soil on the surface with a broom.

2. Alignment: According to the above-ground elevation requested by the planning drawings, find out the elevation of the board from the +50cm line that has been bounced on the wall, and bounce the horizontal line of the board on the nearby wall.

3. Water immersion of terrazzo slabs: In order to ensure the bonding quality between the mortar screed layer and the prefabricated terrazzo slabs, before paving the slabs, the slabs should be soaked with water, and there is no open water on the surface when supplemented.

4. Mortar mixing: pay attention to the control of the amount of water added, mix the mortar to form a ball by hand, and then disperse it is appropriate, with the paving and wiping, not too much mixing.

5. Watering the bottom layer and brushing cement slurry: water and moisten the surface of the bottom layer after cleaning (no open water).

6. Laying cement mortar contact layer and prefabricated terrazzo slab: After checking the painted cement slurry without air drying, you can start to lay the mortar contact layer; When paving prefabricated terrazzo slabs in the room, they should be symmetrical with non-whole slabs when they are laid to the nearby walls.

7. Maintenance and grouting: prefabricated terrazzo slabs are paved for 2 days and nights, after checking the appearance without cracking and hollowing, fill the joints with dilute cement slurry, and wipe the overflowing cement slurry at any time, pour 2 3 heights, and then fill it with cement slurry of the same color as the terrazzo slab.

8. Sticking the baseboard: Before the device, a special person should be selected, the thickness must be consistent, and the baseboard should be soaked and dried with water.

9. Pickling and waxing: After the surface layer of the prefabricated grinding stone is cleaned, the wax is diluted and pasted with cloth or clean linen silk.

Terrazzo (also known as grinding stone) is a product that mixes aggregates such as crushed stone, glass, quartz stone into cement binders to make coagulation products, and then grinds and polishes the surface. The terrazzo made of cement adhesive material is called inorganic grindstone, and the terrazzo made of epoxy adhesive material is also called epoxy grinding stone or organic grindstone.

Traditional terrazzo has a huge market in China with its unique advantages such as low cost, arbitrary color parquet, and convenient construction, and has been used in various types of buildings in urban and rural areas across the country with as much as one billion square meters of terrazzo floor.

1) After high-grade terrazzo (also known as commercial terrazzo) surface light highlight, the high brightness reaches more than 70 90 degrees, and the dustproof and anti-slip reaches the quality of marble.

2) Wear-resistant terrazzo and surface hardness can reach 6-8 grades.

3) Ready-made or prefabricated terrazzo, can be spliced at will, and the color can be customized.

4) The new terrazzo does not crack, is not afraid of heavy vehicle rolling, is not afraid of heavy dragging, and does not shrink and deform.

5) No dust, high cleanliness; The cleanliness meets the requirements of high clean environments such as pharmaceuticals and chip manufacturing.

Only so the use of terrazzo floor, one is non-slip, the second is beautiful, especially the Nalute silica grindstone, the third is not worried about decoration pollution, the fourth is not worried about radiation, the fifth is moisture-proof, in the spring, free from the trouble of returning moisture.

Building materials in change Terrazzo: In recent years, terrazzo has made a comeback with a new attitude and new technology, reinterpreting the connotation of architectural culture with the language of overall seamless, infinite design and worry-free use experience, and turning around gorgeously with gold diamond grinding stone terrazzo and silicon grinding stone terrazzo as the carrier to reshape the life of the building. The terrazzo floor will only make a comeback, and this is because of the guidance of top foreign designers.

In line with this trend, Nalut launched the gold diamond grinding stone terrazzo and the silicon grinding stone terrazzo, and integrated the design into the design, making many terrazzo **, terrazzo pattern effect patterns, there are.

1. All kinds of colored stones with terrazzo**, terrazzo pattern renderings.

2. Terrazzo with various shapes of stone **, terrazzo pattern renderings.

3. Terrazzo mixed with various shapes of tiles**, terrazzo pattern renderings.

4. Terrazzo with various models**, terrazzo pattern renderings.

Fully meet the creative imagination of global designers.

1. Do the screed: pave the cement mortar screed. This link should be carefully observed, and the up, down, left and right should be aligned, and there should be no short end and long end, uneven distribution, which makes people feel uncoordinated.

2. Grid strip inlay: according to the design requirements, pop up the vertical and horizontal directions or pattern ink line, and then divide the grid strip according to the ink line, after the grid strip is completed, it should be watered and cured every half a day or so, and it should be maintained for two days. Staff should wait.

3. Maintenance: After paving the stone slurry, it is necessary to water and maintain it one day, and a cordon should be set up to prevent pedestrians from trampling.

4. Grinding: When grinding, test grinding should be carried out first to ensure that the stone particles are not loosened, and then the grinding can be started. Mechanical grinding stones are used for large areas, while small portable mills are used for small areas and corners, and hand grinding can also be used.

Terrazzo is a commonly used decoration material in the decoration process, and it is used more and more in home decoration, because terrazzo can match various colors together and can play a good decorative effect, so how to do terrazzo ground? How to maintain the terrazzo floor? Let's take a look with me!

1. How to do terrazzo ground.

1. First of all, the fine sand, cement and sand should be mixed to form concrete and then spread on the ground base; 2. After the concrete solidifies, it is time to level the leveling layer, and it is recommended to use an interface treatment agent to enhance the adhesion between the material and the ground; 3. Fix the separator and fill it with aggregate, and granite, marble and other materials can be used; 4. Then carry out the sealing and curing process to avoid the problem of sand in the later stage; 5. Polish, polish and wax the ground to make the ground look brighter.

Second, how to maintain the terrazzo floor.

1. After the terrazzo is laid, the ground needs to be fully sealed with wax, and within a few months of the first laying, the ground needs to be cleaned every day, the residual minerals on the ground should be thoroughly cleaned, and if necessary, another layer of wax can be applied to keep the ground bright.

2. In daily life, you should use a broom to clean the terrazzo floor every day, and maintain it every once in a while, you can first clean the terrazzo floor with a wet mop, and then polish it with a synthetic fiber pad, and do not use steel wool when polishing, so as not to make scratches on the ground.

3. In the process of daily maintenance, there is no need to wax and polish every day, and the terrazzo floor needs to be polished periodically according to the situation, so as to keep the terrazzo floor smooth and bright for a long time.

Summary: The relevant content of how to make terrazzo ground is introduced to you here, I hope to help friends in need. After the construction of terrazzo floor is completed, it is necessary to understand the maintenance knowledge of terrazzo floor, so as to extend the service life of terrazzo floor.

In daily life, we often see terrazzo floors in large public places. It is a composite flooring material with cement as the main raw material. The effect is that the surface is very shiny, and the anti-slip and dust-proof effect is excellent. by <>

In daily life, we often see terrazzo floors in large public places. It is a composite flooring material with cement as the main raw material. The effect is that the surface is very shiny, and the anti-slip and dust-proof effect is excellent.

Due to their low cost, many products are often used for home renovation. Next, let's take a look at what to do with terrazzo flooring.

1.What is terrazzo?

Terrazzo, also known as grinding stone, is a concrete product made by mixing the main aggregates such as crushed stone, glass, and quartz stone into a cement binder, and then grinding and polishing its surface. Traditional terrazzo is very cheap, and you can splice any pants and cherry blossoms, and it is also easy to construct. However, the market in China is also huge, and it is widely used in large public buildings.

According to relevant statistics, the usable area of terrazzo in public buildings in China has exceeded 6 billion square meters. The advantage of terrazzo flooring is that it is moisture-resistant and maintains a very dry floor even in southern climates.

2. How to make terrazzo floor?

1.First of all, the first step is the screed. The so-called screed layer is to use 1:3 dry hard cement mortar, and then compact and smooth after smoothing.

2.The second step is the inlay of the grille bar, which is plastered into a figure-of-eight angle with pure cement slurry, and the steel bar is firmly embedded. The wire ground with copper strips must be well embedded.

We need to pay attention to the fact that the height of the pure cement slurry should be 3-5mm lower than the grille strip, and then it must be tight, and the mosaic should be very strong. The top surface should be on the same plane, and the flatness and straightness must be checked with a wire.

3.The third step is to wipe the surface layer of the gravel slurry. When plastering mud and gravel slurry, it must be proportioned according to the requirements.

The surface of the gravel mud must be swept at least twice and glued with wool, because only after the stone cavity has been evenly grained, the iron trowel can be flattened and compacted until the mud is submerged. At the same time, it should be noted that the ripples must be smoothed out, and the stones on the top surface of the grid must be cleaned.

4.The final step is sanding. When grinding, if the terrazzo floor area is large enough, a mechanical stone machine should be used.

If the area is small or in a corner, a small portable grinder can be used for grinding. For those places where there is no local mechanical grinding, we can use hand grinding.

With pure width, Bian Xiao has compiled for everyone about how to make terrazzo flooring. After reading the content of Bian Xiao's article, I believe you have a certain understanding of how to make terrazzo floor. If you are interested, you can follow the above practice to experience it yourself, but the specific construction steps still need to be operated by professionals.