I can t connect to the Internet after the computer blue screen restarts10

Functions of the "360 System First Aid Kit" below, click on it:

Start First Aid! After the first aid is completed, deal with it immediately and restart!

After booting, "File Quarantine" to delete files completely!

System Settings Repair Area", select all, fix now! [Key].

Network Repair Area, Start Repair, Restart Computer! [Key].

DLL system file repair area, scan it, if there is loss, add recovery, no on the line!

3。Use "360 Security Guard" to "Scan Plugins" and then click: "Clean Plugins" and put "Bad Reviews."

Plug-in "Remove!"

4。Then use "360 Antivirus Dual Engine Edition", check "Automatically process scanned virus threats", "Full.

Scan" & "Custom Scan", Virus Trojan, and then click Remove! After restarting your computer, come to "Quarantine."

area", click "Completely delete"!

5。Trojan scanning, "full scanning" and "custom scanning", detect and kill Trojans, deal with them immediately! Heavy.

Open! "File Recovery Area" to remove completely!

6。If it doesn't work again, try: Kingsoft First Aid Kit, check "Extended Scan", scan immediately, and after finishing, deal with it immediately and restart the computer!

7。If it doesn't work again, try: Kingsoft NetShield, one-click repair!

8。It really doesn't work, you can only: restore or reinstall the system with one click!

If everything is in order, rule out the network card problem.

Carefully inspect your network cable, especially if the water lens is loose and if the other end of the network cable is falling off or loose.

If these are discharged, it is a system failure, and it may be poisoned!

If you have a blue screen on your computer, is it a friend when playing a game, right-click on my computer, or the computer properties, device manager, and see if there is a network adapter in it, if so, see if there is any information such as a network card, or is there an exclamation mark? Is the graphics card too hot or the CPU desk is hot? Or a memory issue.

Dust off the computer, add some oil to the fan, add some hot cake to the CPU, and basically solve your problem!

To answer most of the questions from the router, you can connect the network cable of the computer directly to the broadband, and then open the online neighbor - attribute - broadband link - enter the Internet account password to log in to the network for a period of time to observe whether this happens, if there is a view of the local link, the problem of not receiving the computer is estimated to be the network card, if there is no data to be sent, it is broadband.

It is the problem of the router, the sending data is abnormal, and the common solution is to restore the router to factory settings, that is, there is a small button on the side of the network cable interface behind the router, press it tightly until all the lights are black and then all on even if the recovery settings are completed, at this time, the user needs to manually set up the Internet.

You refer to it.

Ask a question: This problem appears on the computer screen.

Question Okay, thank you.

The question has been rated!

Ping see-through? If it doesn't work, it's a problem with the network card, and the network card is changed

Okay, just restart the cat and take a look

It is mainly caused by your CPU heating, and your CPU fan has too little thermal insulation, which will cause the CPU to overheat and not dissipate heat enough, but it will lead to power failure, restart, and inability to connect to the Internet.

On hot days, this situation will occur more often, often in the afternoon, or after dinner in the evening, or when you have been using it for a long time!

When the weather is hot, you can take the case cover away and ventilate the inside of the computer, but the best solution is to buy a CPU fan with a thick thermal insulation layer, which is about 25 yuan, and it is basically solved!

Good luck!

Cause of the failure system First, try all of the following solutions.

The first type of system problem is to go back to the original or redo the system with one click.

The second type of software problem is to reinstall the software under it.

The third software virus residual file cleans up the memory.

Fourth, the software is incompatible with the software.

Fifth, the cache settings are not reasonable, and the cache is reset.

Sixth, the system is short of resources, and the memory is deleted and cleaned up.

The seventh type of virus, Trojan horse detection and killing virus.

Eighth, the hardware is overheating, the CPU is too hot, and the heatsink is too dusty.

The ninth hard drive problem is to clean up the disk. Defragment the disk.

The tenth type of hardware quality hardware should be jumped.

The eleventh type of hardware overclocking is to de-energize the battery.

The twelfth type of hardware environment is re-seated.

Only lift the arch solution. No explanation is given.

1: To boot the computer, restore the BIOS to its factory state. (Battery de-energized) is more critical and must be done.

2: You copy the following command or in. Command Prompt Input:

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

If not, take the original disk of the system and put it into the optical drive.

You copy the following command or in. Command Prompt Input:

regsvr32

Point to the system disk i386

3: Restart your computer. Do a comprehensive antivirus.

Then do the following four points faster on the computer.

The first is to close all startup items. (msconfig) in Run (tick) ctfmon

and anti-virus software.

The second is to empty the ** station. The system needs to clear IE temporary files and records. Delete your own use.

Patch files. Third, set up a firewall. Right-click on properties on my computer. Point System Restore. (tick).

Fourth, turn off System Restore on all drives. Turn off automatic updates. Open the Advanced System Properties dialog box, click Settings in the Startup and Recovery area on the Advanced tab of the System Properties dialog box, and uncheck Auto Restart in the Startup and Recovery dialog box.

In the Advanced tab, click the dot Error Reporting and the dot Disable Error Reporting