Do electric toothbrush heads need to be removed and cleaned every time?

After brushing your teeth, there will always be some foreign matter and toothpaste left on the bristles, and if you don't wash it for a long time, bacteria will infect the periodontal periodontal, and the brush head of the electric toothbrush should be thoroughly cleaned and disinfected once a week.

If the electric toothbrush is exposed to high temperature or exposure to the sun for a long time, the bristles are easy to bend and deform, so remember to put it in a ventilated and cool place to take good care of it. For daily cleaning, you can put the brush head in the water after brushing, turn the electric switch back on, and gently shake it to remove some of the residue.

The high-tech ultrasonic cleaning machine can clean glasses and jewelry at home at the same time, it can also thoroughly clean and disinfect the electric toothbrush head, ultrasonic cleaning has no damage to the electric toothbrush head, liberating hands, saving time and effort, under the action of ultrasonic, countless tiny cavitation bubbles are generated in the liquid. After the bubble is generated, it will burst immediately, and this process will produce a strong impact force, which will hit and peel off the stains on the surface and crevices of the object, so as to achieve an efficient cleaning effect, and the physical cleaning ability is incomparable to other cleaning methods.

Generally, it is directly unplugged, and some models will have buckles, just remove them in the correct way.

The steps are as follows: 1. Under normal circumstances, the brush head of the electric toothbrush can be replaced, and there will be a spare brush head, if not, buy according to the model, and if you don't know the model, buy it according to the brand of your toothbrush.

2. Remove the original brush head, which is generally pulled out directly, and some models will have buckles, just remove them in the correct way.

3. Discard the replaced toothbrush head, and then soak the toothbrush rod and the new brush head in salt and baking soda for half an hour. Note that the toothbrush rod is soaked only in the connection to prevent water from entering the battery.

4. Install the soaked toothbrush head, pay attention to the tight connection, if part of the position is not tight enough, you can use plastic wrap or raw material tape to fill it tighter.

Take the electric toothbrush out of your skincare products and place it in your hand.

Hold the bottom of the electric toothbrush with your left hand and secure. Hold the electric toothbrush head in your right hand and turn it left and right to pull the toothbrush head upwards.

In this way, the electric toothbrush is removed. If you want a new toothbrush head, you can install it by following step 2.

Generally, toothbrushes will produce a lot of dirt after being used for a long time. You can use a damp towel to clean the connection between the toothbrush head and the toothbrush.

Take the electric toothbrush out of your skincare products and place it in your hand.

Hold the bottom of the electric toothbrush with your left hand and secure. Hold the electric toothbrush head in your right hand and turn it left and right to pull the toothbrush head upwards.

In this way, the electric toothbrush is removed. If you want a new toothbrush head, you can install it by following step 2.

Generally, toothbrushes will produce a lot of dirt after being used for a long time. You can use a damp towel to clean the connection between the toothbrush head and the toothbrush.

If the sonic electric toothbrush brush head cannot be pulled out and is stuck, you can refer to the instructions for using the electric electric toothbrush and try to pull it out again, maybe you can unplug the brush head of the sonic electric toothbrush. Sonic electric toothbrushes are more convenient to apply than traditional soft-bristle toothbrushes, and the cleaning ability is also stronger, so the current sonic electric toothbrushes are very popular, basically every household has them.

One of the many benefits of a sonic electric toothbrush is that it can be swapped out for a wide variety of brush heads. But how did you change it? In fact, in the case of disassembling and replacing the brush head, you must choose the same well-known brand as the original brush head, and the model specifications must be exactly the same before you can replace it.

If it is not the same well-known brand, or not the same model and specification of the toothbrush head, basically can not be replaced sonic electric toothbrush brush head, so in the case of disassembly, we must pay attention to the selection of the same well-known brand, and its same model and specification of the sonic electric toothbrush machine equipment can be replaced.

There is a switch on the side of the electric toothbrush, and the brush head can be removed after pressing it.

The brush head of some toothbrushes is directly unscrewed, and then screwed on when installed, mainly depending on the brand and configuration of the electric toothbrush.

The electric toothbrush only needs to gently hold the toothbrush handle, and then pull it out forcefully to remove the toothbrush head smoothly, and the operation is very simple and convenient.

There are many types of electric toothbrushes now, so the method of removing the brush head may also be different, which is basically a twist method, that is to say, there is basically a spiral-like buckle, after twisting the buckle, and then install a new brush head.

Grab the brush head of the electric toothbrush and gently twist it counterclockwise to remove it, then take a new brush head and screw it clockwise.

The brush head of the electric toothbrush can generally be pulled off directly, and some models will have a buckle, if there is a buckle, press and hold the buckle and then remove the brush head.

1.First of all, remove the old brush head, usually directly unplugged, of course, some models will have a buckle, as long as you remove it according to the correct way.

2.Second, throw away the removed toothbrush head and soak the toothbrush shaft and new brush head in salt water for 30 minutes.

How to remove the brush head from an electric toothbrush. Just take a closer look at whether the brush head has a gap in the ring, and rotate the brush head counterclockwise by hand to remove it.

There are generally two ways to remove the brush head from an electric toothbrush:

One is that the toothbrush head has a button, press the button, pull the brush head up, you can load and remove the brush head; The other type of snap-on type requires the brush head to be pulled outwards with force, which can be removed directly.

The electric toothbrush is actually just fixed to the handle of the toothbrush, and we only need to pull it out with a gentle force. Always remember to replace the brush head of your electric toothbrush every two months.

The brush head of the electric toothbrush is not buckled or threaded, grasp the lower head of the toothbrush with one hand, grasp the brush head with the other, and pull it out vigorously.

Nowadays, many people will use electric toothbrushes, which are more convenient to brush their teeth, and the brush head can be replaced. The general electric toothbrush is its brush head, which can be unplugged directly.

Under normal circumstances, the brush head of electric toothbrushes is designed with a snap-on type, but some electric toothbrushes can be pulled out directly, so it is best to pay attention to whether there are indication signs when replacing the brush head.

The brush head of an electric toothbrush is easy to remove. There is a button in the middle of the electric toothbrush, and you can take it off by pressing this brush. Then replace it with a new one of the same model and you can do it.

The brush head of the electric toothbrush can be directly unplugged, some models will have a buckle, there is a buckle, press and hold the buckle to remove the brush head can be operated, the method is the same, you see which type your electric toothbrush brush head belongs to.

The brush head of an electric toothbrush can be unscrewed directly, and the top can be directly replaced, while some electric toothbrushes may be disposable, that is, they cannot be removed, and can only be used by changing the battery.

In general, most electric toothbrushes can replace the toothbrush head. Most of them are simply unplugged. Some will also have buckles.

In this case, holding down the button will do the trick. If it is pulled, do not rotate while pulling it again, just pull it up forcefully. Electric toothbrush heads can be replaced with new ones every three months or so.

Avoid the growth of bacteria.

The average electric toothbrush can be removed as long as you pinch the brush head and twist it, and then pull it out. But every electric toothbrush is different, you can do your own research.

There is a small button between the toothbrush stem and the toothbrush head, which can be removed by pressing and turning the toothbrush head.

After the electric toothbrush is stuck, you can pull it out again according to the direction on the electric toothbrush manual, and you can pull out the brush head of the electric toothbrush, and some brush heads need to be rotated to pull out the brush head.

How to remove the brush head of the electric toothbrush, generally speaking, you can pull it out directly, and some brands and models of electric toothbrush brush heads have a buckle design on it, so you can press and hold the buckle and pull it out.

Replace with an electric toothbrush.

The specific method of the brush head is as follows:

1. Hold the handle of the brush with your left hand, hold the brush head firmly with your right hand, and rotate the brush head firmly in the direction of A to B.

2. When the marking line of the brush head is moved to position BGrab the brush head with your right hand and pull it out.

3. Take out a new brush headto attach it to the brush handle, and when installing, the raised position of the brush handle is assembled along the recessed part of the brush head.

4. When the marking line of the brush head is moved to position B, grasp the handle with your left hand and the brush head with your right hand, and rotate it in the direction from B to A.

5. When the marking line of the brush head coincides with the dot marking position of the brush handleThe new brush head is replaced.

Precautions for the use of electric toothbrushes:

1. Do not put the electric toothbrush in a high temperature place or in a state of exposure to the sun for a long time, so as to avoid the bristles from being deformed and bent due to high temperature;

2. Wash the toothbrush thoroughly after each use, shake off the water as much as possible, put the toothbrush head up in the mouthwash cup, or put it in a ventilated and sunny place to dry it and sterilize;

3. If conditions permit, you can buy 2 or 3 toothbrushes at the same time to rotate them to prolong the drying time of the toothbrushes. Do this for people with gingivitis.

and periodontitis is especially important for people. In addition, rotation can also maintain the elasticity of the toothbrush bristles;

4. The old toothbrush whose bristles have been spread out or curled and lost its elasticity must be replaced in time, otherwise it will be bad for the teeth and gums;

5. The toothbrush should be thoroughly cleaned and disinfected once a week;

6. Toothbrushes should not be used together to prevent mutual transmission of diseases.

Take the electric toothbrush out of your skincare products and place it in your hand.

Hold the underside of the electric toothbrush in your left hand and hold it in place. Hold the electric toothbrush head in your right hand, turn it left and right, and pull out the toothbrush head upwards.

In this way, the electric toothbrush is taken down, and if you want to replace it with a new toothbrush head, you can install it according to step 2.

Generally, toothbrushes will produce a lot of dirt after being used for a long time. You can use a wet wipe to clean the connection between the toothbrush head and the toothbrush.

Different brands of electric toothbrushes have different brush heads. First of all, check the specific model and buy a new brush head that is suitable for you.

Depending on the style, remove the old brush head directly or by twisting ,..

Place the toothbrush shaft and new brush head in warm salt water and soak for 30 minutes.

Generally, the brush head of an electric toothbrush is either stuck on or screwed on, and it is basically a little more stuck to see which product you are buying.

Generally, you can pull it out directly.

You can use a little force.

1.How often should I change the brush head of my electric toothbrush?

The time to change the head is actually the same as the use time of a regular toothbrush, according to the calculation of brushing twice a day, about once every 3 months. Generally speaking, the brush head of a toothbrush needs to be replaced after three months of use. Although it is difficult to detect with the naked eye, the bristles at this time have been deformed and aged very seriously, and the cleaning effect on your teeth will be immediately halved, and the electric toothbrush** will also damage your gums.

2.How can I make my electric toothbrush last longer?

Electric toothbrushes are due to their complex structure, and there will be some gaps in the brush head that ordinary toothbrushes do not have. Electric toothbrush** When brushing our teeth, the electric toothbrush helps us do most of the work, and when the brushing is done, it is time to clean it well. For electric toothbrushes, be sure to rinse thoroughly with clean water to prevent the residual liquid from the toothpaste from remaining inside the brush head.

After the electric toothbrush is rinsed, try to shake off the water dry, because of the domestic water quality problem, the tap water that has not been filtered by our own treatment will easily cause scaling to the brush head, thus affecting its use effect.

Generally speaking, the domestic toothbrushes currently sold on the market will bend after 1-3 months of use. And crooked toothbrush bristles not only fail to clean food debris between teeth, but also bruise your gums. Therefore, if you notice that the bristles of your toothbrush are bent, you should replace it with a new one immediately.

In addition, it is easy to retain bacteria in the toothbrush head after being used for too long. Therefore, it is generally recommended to replace your toothbrush at least once every three months.

According to the actual situation, the toothbrush bristles are deformed and the brushing frequency is taken as the degree.

According to American medical experiments, some patients with long-term throat diseases can significantly improve their condition if they replace a new toothbrush every few weeks.

Toothbrushes that last more than two months can breed germs such as hemolytic streptococcus, lung cancer bacilli, Candida albicans and glucococcus. These bacteria can easily cause diseases such as laryngitis and acute tonsillitis, and people with imperfect immune systems can also develop rheumatic fever and acute glomerulonephritis. So after each brushing, be sure to rinse your toothbrush and place it in a dry place.

The head of the toothbrush should be placed facing up, and it is best to soak it in vinegar every three to five days and replace it with a new one at least three months to ensure that the toothbrush is clean and hygienic.

Like traditional toothbrushes, electric toothbrush heads are replaced every three months.

Toothbrush heads should generally be replaced once in 3-6 months, how to remind you whether it is time to replace them? First, you can look at the bristles, the bristles of the new toothbrush are straight, and when the bristles of the brush head used now are broken or bent, they can be replaced; The second is that you can see the color of the bristles, if there are unknown objects such as yellow or black, you can replace them;