Network set top box, stay on the boot interface

1. If the network set-top box of China Unicom user cannot be turned on, the main reason is that the power connection is abnormal.

2. It can be handled as follows:

Step 1] Check whether the power cable of the set-top box is connected normally.

Step 2] Check whether the wall plug or power strip plug is powered on.

Step 3] Reconnect the power cable.

Turn off the TV - Unplug the power of the network set-top box - Insert the rest hole of the set-top box with a paper clip and hold - Plug in the power supply and turn on the TV - The TV screen appears - Release the REST button.

Step 5] If the above steps cannot be resolved, contact the O&M staff for processing.

The reason for staying in the boot interface: Since the network set-top box has been equipped with the intelligent system, the speed of upgrading is comparable to that of a mobile phone. The speed of software update is faster, some set-top boxes may be single-core, dual-core, the system version is, and the hardware configuration and system version required by the program are relatively high, and various problems will occur.

It is precisely because of these instabilities that various problems occur in the network set-top box. And getting stuck on the boot interface is the most common problem.

Reasons to stay on the boot screen:

Since the network set-top box is equipped with an intelligent system, the speed of upgrading is comparable to that of a mobile phone. The speed of software update is faster, some set-top boxes may be single-core, dual-core, the system version is 4 0 4 2, and the hardware configuration and system version required by the program are relatively high, and various problems will occur.

It is precisely because of these instabilities that various problems occur in the network set-top box. And getting stuck on the boot interface is the most common problem.

If the problem persists after restarting, it belongs to the hardware failure of the set-top box, contact the after-sales service for detailed testing, or replace the set-top box with a new one for testing. A set top box (STB), commonly known as a set-top box or set-top box, is a device that connects a television to an external source.

It converts compressed digital signals into TV content and displays them on the TV. Signals can come from wired cables, satellite dishes, broadband networks, and terrestrial broadcasts.

The problem of system operation when booting, only restart to try or restore factory settings, if you have been repeatedly stuck in the boot interface, you need to flash the machine, it is recommended to contact the after-sales service to consult whether you can deal with the fault.

Summary. It is a common problem that the set-top box of IPTV is stuck on the boot page, what should I do if this problem occurs? First of all, the reason why the TV box is stuck may be due to the system, when the TV box is installed with the intelligent system, it will be updated frequently, and the software in the box has been constantly updated.

In addition, some set-top boxes may be single-core or dual-core, and the system version is relatively high. However, it is precisely because of the unstable matching of these systems and software that there are various problems in the TV box,One of the problems may be that the picture is stuck in the boot interface。 If this is the case, what can be done?

1.First of all, turn off the TV and unplug the power of the network set-top box; 2.Then find a toothpick or paper clip and insert it into the reset hole (reset hole) of the TV set-top box; 3.

Then plug it in, and when the TV sees the picture, release the reset button:4At this time, the device will start automatically,We don't have to do anything,When the TV box is restored to the factory,You can enter the interface smoothly。

What should I do if the IPTV set-top box stops on the boot page.

It is a common problem that the set-top box of IPTV is stuck on the boot page, what should I do if this problem occurs? First of all, the reason why the TV box is stuck may be due to the system, when the TV box is installed with the intelligent system, it will be updated frequently, and the software in the box has been constantly updated. In addition, some set-top boxes may be single-core or dual-core, and the system version is relatively high.

However, it is precisely because of the unstable matching of these systems and software that there are various problems in the TV box,One of the problems may be that the picture is stuck in the boot interface。 If this is the case, what can be done? 1.

First of all, turn off the TV and unplug the power of the network set-top box; 2.Then find a toothpick or paper clip and insert it into the reset hole (reset hole) of the TV set-top box; 3.Then plug it in, and when the TV sees the picture, release the reset button

4.At this time, the device will start automatically,We don't have to do anything,When the TV box is restored to the factory,You can enter the interface smoothly。

Of course,If you want to avoid the above problems as much as possible, it is recommended to choose the software version that matches the TV box when the software is used,There are different types of software versions in the dangbei market,It can meet the matching needs of most TV boxes,If you need it, you can try-try。

Thank you for your trust, the above is my reply, I hope it can help you, I wish you a happy life If mine is helpful to you, I hope to give it a thumbs up at your convenience, thank you!

Question: I use nine cats, I can't enter the system, and I can't find the reset button.

Ask how to flash the phone.

03Create a folder upgrade in the USB flash drive and put the flashing file into upgrade.

04 Insert the USB flash drive into the box, turn on the power of the box, and the box will start to flash automatically after it starts.

05After the progress bar is completed, when the box is restarted, pull out the USB flash drive, and the box continues to start into the system, and the flashing is successful.

Can't enter the system desktop, it is generally caused by the system program crash, which can be solved by Shuangqing, specific steps:

Preparation tool: Toothpick*1;

Use a toothpick against the "REC" reset hole on the back of the set-top box;

After resisting the hole, the box is connected to the power supply and energized;

The system enters the REC interface, operates with the remote control, executes the two commands at the beginning of WIPE, and clarifies the data;

Select the first item reboot, restart the box, and return to normal.

1. Prepare a network cable, insert one end of the network cable into the network interface of the TV, and the other end into the LAN port of the router.

2. Start the TV and enter the main interface of network TV. Use the TV remote control to operate, find the system settings, and press the confirm button to enter.

3. After entering, find the network settings and press the confirm button to enter.

4. After entering, select the wired network connection, and set the TV to automatically obtain the IP address.

Your set-top box is a system problem, you need to flash the phone to solve the card boot page failure, press the reset button to see if you can solve the problem,

When the TV is turned off, how will the surface be displayed.

1 With the power adapter that came with it.

Plug in the power port of the network set-top box.

Turn on the power switch of the network set-top box.

Pick up the remote control, press the power button of the remote control, after powering on, the LED indicator on the front panel of the set-top box starts to display a red light, and then flashes a green light, at this time the host enters the boot action.

After it is fully turned on, the TV will display the logo of the network set-top box manufacturer and enter the main interface.

The set-top box of IPTV stays on the boot interface and cannot be turned on.

Reason: Since the network set-top box has been equipped with the intelligent system, the software update speed is faster, and some set-top boxes may be single-core or dual-core. However, the hardware configuration and system version required by the program are relatively high, and various problems will occur.

And getting stuck on the boot interface is the most common problem. Workaround: Just need to do a factory reset.

Strictly follow the following methods to restore the factory setting operation: first turn off the TV, unplug the power supply of the network set-top box; Then find the toothpick or paper clip inserted into the REST hole of the set-top box; Then plug in the power supply, and when the TV sees the picture, release the REST button; At this point, the top box will start automatically.