Can the router be connected to a mobile phone hotspot to surf the Internet?

OK. Turn on the mobile phone hotspot, and then enter the router settings, take the TP router as an example, 1, click the basic settings on the left, turn on WDS, 2, there will be a scan, and the AP list will appear after the scanning is completed, 3, find the corresponding mobile phone hotspot SSID point connection, and fill in the password after returning.

4. At the same time, you want to turn off the DHCP of the router, and you can restart the router when you are done.

1. Flip down the phone to see the hot button on the phone.

2. Press and hold the hotspot button to enter the hotspot setting interface.

3. Click Configure WLAN Hotspot to enter the hotspot setting option. Configure the hotspot name and password, and make sure that the broadcast channel must be fixed, and it does not matter which channel is specific. If it is set to automatic, the bridge will not be able to connect to the Internet.

4. Or use a laptop to connect to the wireless hotspot signal of the mobile phone, and click to start entering cmd.

5. Click to enter cmd and enter ipconfig enter.

6. The following interface appears after entering. You can see that the default hotspot gateway address is, remember this IP address, this address needs to be entered into the gateway and DNS in the router, without this address, the router cannot access the Internet after the bridge.

7. Connect the notebook computer or mobile phone to the hotspot wifi of the mobile phone, enter the router management address (or enter the router management interface.

8. The key point to note is that after entering the router, click on the routing settings, to set up the DCHP server, enter the gateway address queried in the second step into the gateway and DNS input box and save it. Restarting the router after the setup will show that the bridging is successful.

1. Find "Settings" on the desktop of your phone and click to enter the "Settings" option.

2. Enter the "Settings" option and click "Personal Hotspot".

3. Go to "Personal Hotspot" and turn on the "Personal Hotspot" switch, and set your phone as a hotspot source.

4. Once the settings are complete, tap the settings of the other phone.

5. Click on the wireless LAN to search for hotspots.

6. After finding the mobile hotspot you just set, enter the password to connect to the hotspot.

OK. As long as your computer has a wireless network card, you can receive the mobile phone hotspot, and you can get on it if you know the password.

Absolutely! Why not? However, the computer needs to have a wifi module or a wireless router, so just...

No. The wireless network card of the mobile phone is a built-in wireless network card, which is the only gateway component to receive wireless wifi signals.

The classification in the wireless network card is divided into three categories of data transmission modes: full-duplex, half-duplex, and simplex.

1. Simplex can only send or receive signals separately, and the communication is one-way. Like the relationship between a lighthouse and a ship, a lighthouse can only send signals.

2. Half-duplex means that A can send a signal to B, and B can also send a signal to A, but it cannot be done at the same time, just like a walkie-talkie, only one person can finish speaking and then let another person speak.

3. Full-duplex means that both parties can receive and send signals at the same time, please refer to the **.

Many of the wireless network cards of mobile phones are basically half-duplex types (with a few exceptions), which leads to the reason why the wifi and hotspot of the mobile phone cannot be turned on at the same time.

If you are using a Vivo mobile phone, some models support Wi-Fi connection bridge, that is, you can share the Wi-Fi network as a hotspot with other devices (laptops, mobile phones, etc.), or share it with your own friends and relatives to use together, say goodbye to data famine, share WiFi hotspots, and enjoy the online world with multiple devices.

How to turn it on: Go to your phone's settings -- Other networks and connections -- Personal hotspot -- turn on the "Personal Hotspot" and "Allow sharing of Wi-Fi network" switches, and the connected Wi-Fi network will be shared with other devices first. (Models without options are not supported).

Some mobile phones can, for example, Huawei, Honor mobile phones are mostly supported.

How it works:

The first step is to stay on the home screen, and then pull down the phone menu, some phones may need to swipe up, this depends on the difference between individual phones. After the menu is pulled down, we find the mobile hotspot and turn it on.

The second step is that after the mobile hotspot is turned on, it will be reminded in the notification bar, and we click on it to set it up, as shown in the figure below. Let's set up the hotspot we just opened.

The third step is that after we open the mobile hotspot sharing settings, we can turn on the mobile network or not.

The sharing is reconfirmed.

Step 4: Further set the name and security of the mobile hotspot.

Step 5: After the mobile hotspot is turned on, we start to connect to the mobile hotspot that we just opened. First, pull down the menu and turn on Wi-Fi.

Step 6: Find the wireless network you just turned on the hotspot and enter the password to connect.

Step 7: After the connection is successful, we will see that there is a selected network under the wireless network, and the section has shown that it has been connected.

1. The same way as the general way to connect to WiFi, so you need to ask the name and password of the other party's hotspot before connecting; After knowing the name and password of the hotspot, turn on the wifi of the mobile phone and search for the name of the hotspot of the other party;

3. If you need to turn on the hotspot, you only need to turn on the [Personal Hotspot] function in the settings of your phone, set the hotspot name and password, and then turn on the switch to share the hotspot;

How to connect to a mobile phone hotspot.

Turn on the hotspot and enter the password.