How to open a beer bottle, how to open a beer cap

1. The first method is the most practical. If you buy more than two bottles of beer, we can put one bottle of beer first, then put the cap of the other beer on the mouth of the other beer, and then connect the beer bottles up. Under the force of the impact, we can open the cap of another bottle of beer.

To open the beer with the first method, remember the beer bottle cap and be sure to fasten it. Also, when adding beer, don't push too hard, just push a little more so as not to break the beer bottle.

2. There are many ways to open a beer bottle with chopsticks. Opening a beer bottle is a very simple method. Place the chopsticks on the table with the thick ends facing up, and place the beer bottle cap on the edge of the chopsticks.

Then firmly grasp the chopsticks and the body of the beer bottle, and push the beer bottle cap away at the same time. Beer bottle caps open naturally, and when you exert force, you need to apply subtle force, and if the force is not enough, then open two more.

I learned, the skills of opening the beer bottle cap, you can easily unscrew it by hand, simple and convenient, great life tips, life tips, home tips, I hope to help everyone, solve the troubles, thank you!

with tools. 1. Use scissors. Open the scissors and gently place them under the cap, parallel to the folds (scissors facing the bottle). Start with a small fold and continue to cut in a circular circle until the cap can be removed.

2. Use a small key. Aim the key at the gap between the bottle cap and the wine bottle, pry a few times little by little, this position is deformed, and then pry the opposite one, and then turn it around and pry again, and when you hear the sound of air leakage, you can easily punch the bottle cap with your hands.

Tools such as paring knives, nail clippers, etc., are all pried open or cut first, and then easily removed when there is an air leak.

Bite with your teeth. You can bite the cap with the teeth on the side, the lower teeth are stuck at the junction of the cap and the wine bottle, and the upper teeth are stuck in the middle of the cap.

With beer. The two beers are facing each other, the caps are hooked together, the left hand holds the caps of both beers, and the right hand presses down on the top of the beer to open.

Use the principle of leverage.

The left hand holds the neck of the bottle in a normal grip position, with the index finger under the cap. Hold the tool with your right hand and insert the tail of the tool between the cap and index finger to firmly hold the bottom edge of the cap. With the index finger against the tool as the fulcrum, the right hand is pressed down, and the simple lever principle makes it easy to open the cap.

The tools that can be used are chopsticks, forks, spoons, lighters, belt buckles, clothes poles, etc.

This practice may cause the cap to squirt out, so be careful not to get sprayed on your eyes and face.

Clamp the slot with a crack.

We can look at our surroundings to see if there are cracks, slots, edges, etc. that can get stuck in the beer bottle cap. For example, drawer handles, just snap the bottle cap into the handle. Press the bottle slightly and it opens, without any effort.

Similar tools include the return slots of vending machines, the edges of window sills or furniture, barbed wire, and so on.

It should be noted that do not use wooden objects to do so, as this will damage the items.

nbsp;Many people like to drink some beer when they eat or have a late-night snack, but sometimes they don't have a bottle opener, so how can we open the cap of the beer? Let's talk about how to open the cap of a beer bottle.

Details:

First, heat the cap with a lighter, then take a few paper towels and put them on the cap, and then unscrew the cap by hand. Here's how to do it, first prepare the ingredients: beer, lighter, paper towels.

1. Start by taking out the beer and lighter.

3. After the cap is heated, take out a few paper towels and put them on the cap.

4. Unscrew the cap by hand.

5. Done.

1. Use a cloth cap chain to blindly screw the cap and then twist the cap.

2. Bottom beating method; Tilt the bottle mouth down at 45 degrees, and pat the bottom of the bottle with your other hand, paying attention to the strength and not smashing the bottle.

3. Heating: Prepare a basin of hot water, put the end of the bottle with a lid upside down in the hot water for a period of time, take out the bottle and wipe it dry, and then twist the lid by hand to open the cap.

4. If there is no hot water, you can use a hair dryer to heat the position of the cap for a period of time, and then unscrew the cap.

5. Tool method: Use a spoon and other iron tools to gently pry the gap between the cap and the bottle body, and let the air enter the bottle and unscrew the cap.

When opening the beer bottle cap, you can use the following ways: 1. Open the bottle cap with teeth; 2. The key opens the bottle cap; 3. Open the cap of the bottle with a lighter; 4. Open the cap with chopsticks.

1. Teeth, some friends can try if they have good teeth. You can bite the cap with the teeth on the side, the lower teeth are stuck in the junction of the cap and the wine bottle, and the upper teeth are stuck in the middle of the cap, and with a light bite, the cap opens.

However, friends with bad teeth should not try, otherwise the bottle cap will not be opened and a few teeth will be lost, and the gains will outweigh the losses.

2. The key, the key that usually opens the door can also open the bottle cap, use the key to align the gap between the bottle cap and the bottle body, pry little by little, when the pry is a little deformed, you can change the side to pry, know that you hear the sound of "pi", rotate the key up to twist the bottle cap, and at the same time you can rotate the bottle body until the bottle cap falls off.

3. A lighter is a sharp weapon for opening bottle caps. Hold the neck of the beer bottle with one hand, leaving space for the lighter to be placed between the finger and the cap, using the lever principle, using the finger joints as the prying point, and the other hand pressing the other end of the lighter down, the firer will push the cap open.

4. Chopsticks also use the principle of leverage, hold the neck of the beer bottle with one hand, use the knuckles as the pry point, aim the thick end of the chopsticks at the gap between the wine bottle and the bottle cap, and gently press the other hand to open the bottle cap. However, the hand holding the chopsticks cannot be held too much, otherwise the chopsticks will be broken because they can't bear the pressure.

The principle of opening the cap of a beer bottle in the air

First of all, before opening the cap, use a lighter to burn around the cap, so that the cap is fully heated, at this time the cap is hot, don't use your hands to take it, be careful to burn your hands, find a rag or paper towel, and gently twist it on the top of the cap, and the cap will fall off naturally.

The main reason is that the cap is not directly covered on the wine bottle by thermal expansion and contraction, and there is a rubber ring in the middle to block the air, and the cap is sucked on the mouth of the bottle by air pressure. After heating, the rubber ring becomes soft, no longer sealing, and once the air pressure becomes balanced, the cap will naturally fall off with a slight twist.