How can you learn how to master the skills of reversing and moving garages faster?

Pay attention to the summary experience: the direction of reversing is the opposite of the rearview mirror, and people who reverse a lot know it.

Listen to the coach's teaching: In addition to summarizing some reversing tips, the fastest thing is to be taught by the coach.

Pay attention to the correct control of the clutch: The key factor in reversing is the rational use of the clutch. It's all about speed.

1. Order. 1. From the starting point a; 2. a B library; 3. a library; 4. Pass through the B library to the starting point B; 5. a library; 6. Return to the starting point A

Requirements: follow the prescribed route and drive smoothly; Do not rub the pile; The body does not go out of the line, and does not press the line; The transfer is in place accurately.

2. Skills. Once in the car, stabilize your mood and don't get nervous. When the car engages in reverse gear at the starting point, pay attention to the control of the vehicle speed: control the vehicle speed in a stable and slow state.

1. Pour into warehouse B.

Hang into reverse gear, when the car is slowly reversing, turn back from the right door and window to see the pile, when the No. 6 pile and the No. 1 pile into a straight line, the steering wheel to the right to kill, the car continues to slowly fall, when the front of the car is parallel to the No. 4-5 pile or from the right reversing mirror to see the body parallel to the No. 2-5 pile, stop (clutch step on the end) back to the positive direction, lift the clutch to continue to pour, and keep the body in the middle of the B library, reverse to the rear of the car from the No. 1-2 pile 30-50 cm parking.

Note: This is the method of Jetta cars.

1. Get up after hanging the reverse gear, and stop when the lock of the right rear door is in a straight line with the front center bar and the left rear bar of the library.

2. The steering wheel is full to the right. After getting up, use the right rearview mirror to look at the center bar and the center line, slowly grasp the steering wheel to maintain the direction, and after the body enters, slowly align, the body tries to keep parallel to the center line.

3. Look back at the rear window after entering the warehouse, brake when the upper right corner coincides with the left rear lever, remove the gear, let the car completely stop and lift the brake, at this time the body is just the right distance from the bottom line. There will be no hitting of the bar and no crossing of the line.

4, hang a gear, the steering wheel to the right full, get up, wait for the lower left corner of the front windshield and the garage front center rod coincide when the brake, the steering wheel to the left full, start, wait for the body to be in position after the brake, at this time the front of the car from the front bar is the standard distance.

5. Hang reverse gear, the steering wheel is full to the right, look at the left rear wheel in the left rearview mirror and brake immediately when pressing the center line, and then fill the steering wheel to the left. Stick your head out of the window and look at the left front wheel to press the center line to stop.

6. Shift a gear, use the edge line in the garage to correct the body, and stop after the right position, but at this time the car is not allowed to rush out of the garage, and must stop in front of the garage door. Then hang the reverse gear, look at the right rearview mirror, the fuel tank door presses the rear sideline to stop, at this time, the transfer program is completed.

7. Hang a gear, and hit the steering wheel on the left for a circle. When the car starts, when the body is aligned with the garage door, the steering wheel returns to the center. From entering the garage door and leaving the garage, to braking after the body is completely out of the garage, hitting the left full, and using the sideline to park the car right.

8. Hang the reverse gear, wait for the left door corner to coincide with the front center bar of the garage, fill it to the left, use the left rearview mirror to slowly enter the center line of the garage, and the front of the car can be parked when entering the garage.

9. Change gear, go out of the warehouse, and stop at the place where the exam starts. Get out.

10. Congratulations, you passed the exam!

Now driving schools are teaching dead methods, look at the point, are using some points on the car as a reference, in strict accordance with the reference standards to do, each coach to find the reference is different, it is not easy to say, it is best not to move the chair, move the chair, the reference object will change.

Generally, the coach will tell you what to look for in reversing, I have just learned, and I don't have much experience to tell you, hehe, don't worry, just take your time.

Reverse Preparation: The vehicle is parallel to the bottom line (the front wheel is positive, you can see whether the steering wheel and left front wheel are correct).

Inverted left library 1, hang the reverse gear, release the handbrake, slowly lift the clutch to semi-linkage, stabilize the clutch after starting, adjust the speed, and reverse backwards slowly; Turn back to the right rear to observe the right rear door triangle window, when the front center bar reaches the front of the triangle window, quickly hit the direction to the right (pay attention to keep the speed of the car at the slowest speed when hitting the direction).

2. If you observe that the right rear of the car may touch the middle bar, quickly turn back to the left in a large direction, wait for a while, and it is estimated that the rear of the car will not hit the stool rod, and continue to hit the right direction.

3. After the rear of the car enters the garage smoothly, observe the left body line through the left reversing mirror and the left side line of the garage is parallel, and quickly turn the direction to the left. After the front of the car smoothly enters the warehouse (at this time, the front of the car should not touch the rods on both sides), look back at the left reversing mirror body and the side line of the flat ** condition to correct the direction, wide, to the left repair, narrow, to the right, (you can also look back to see if the center sign of the rear window of the car and the center of the two rear rods are aligned, if the right deviation, to the left repair, left deviation, to the right repair.) Keep the direction after repairing.

4. When the body reaches the stop sign position, stop.

Invert the right library 1, after reversing smoothly, when the No. 3 and No. 4 poles still have 20 cm to coincide (or when the body reaches the position of the kill mark), the direction is quickly killed to the left.

2. After approaching the middle pole, when the left rear is likely to touch the middle pole, quickly return to the right in a large direction, wait for a while, and it is estimated that it will not touch the middle pole, and continue to hit the left direction.

3. After the rear of the car enters the garage smoothly, observe the left body line through the left reversing mirror and the left side line of the garage, and quickly turn the direction to the right.

4. Adjust the left and right appropriately, and stop the stop sign.

Tips: 1. Try to reverse as slowly as possible, but don't stop in the middle.

2. The first time you die, you can play early than late, you can go back a little early, and there is no adjustment of the rough tong method after the late taxi.

Remember.

There are detailed steps for learning to drive in my space, you can go and see it....