win10 wireless network can not be used win10 network card driver has an exclamation mark, what shoul

1. Confirm whether the wireless function is turned on, and turn the wireless function on or off through the shortcut key (hotkey).

2. Confirm whether the wireless network device in the device manager is abnormally started - > console - > device manager and check"Network adapter"Whether there is an exclamation mark or notThe green box in the figure below is a normal network card, and the exclamation mark in the red box is an abnormal network card.

3. Open the Network and Sharing Center for troubleshooting.

If there is no exclamation mark in the device manager, the network card should be normal, and the problem may be caused by system settings or other network devices.

Start - > Control Panel - > Network and Sharing Center, enter the Network and Sharing Center, and you can see the basic network information.

If an exclamation point or X appears, you can click to perform the built-in network troubleshooter in Windows.

4. Reset the network settings to the default value.

Start - > search process and file input"cmd"Press Enter and click cmd to execute.

Type netsh winsock reset and press enter<>

You need to restart your computer.

Win10 network connection is limited No permission to access the network solution.

1. When the win10 network connection is limited or a yellow exclamation mark appears, right-click the "Network Connection" icon in the taskbar and select "Network and Sharing Center" from its right-click menu.

2. After entering the "Network and Sharing Center" interface, click the "Change Adapter Settings" button in the upper left corner of the window, 3. The "Network Connection" window will open, right-click the "Network Restricted" connection, and select "Disable" from its right-click menu.

4. After the corresponding network connection icon is disabled, right-click the network connection again and select "Enable" from its right-click menu.

5. At this time, for "local connection", the IP address will be automatically obtained from the gateway and connected. For "Wireless Network", you need to click the "Network Connection" icon in the lower right corner of the taskbar, and click the "Connect" button from the open extension panel, and you will find that the network connection is normal.

If that doesn't work, try the following:

View the drive files currently in use from the Device Manager and note the names of these files;

Enter the win10 system and reinstall the driver.

Summary. Hello, 1.When the exclamation mark appears on the win10 wireless network card, first of all, we right-click on the start menu icon and find the device manager in the options.

2.At this time, we can see that there is an exclamation mark at the driver of the wireless network card, which means that the driver Android is incorrect, and we right-click on it.

3.Select Update Driver Software.

4.Then we select the second item "Browse your computer for driver software".

5.Then select "Choose from your computer's list of device drivers" and click Next.

6.Select the second item, "Qualcomm Atheros, AR9285".

7.When this page pops up, we click on the lower right corner to see if we can fix the problem that the win10 wireless network is not available.

What should I do if the win10 wireless network card driver has an exclamation point and can't be used.

Hello, 1.When the exclamation mark appears on the win10 wireless network card, first of all, we right-click on the start menu icon and find the device manager in the options. 2.

At this time, we can see that there is an exclamation mark at the driver of the wireless network card, which means that the driver Android is incorrect, and we right-click on it. 3.Select Update Driver Software.

4.Then we select the second item "Browse your computer for driver software". 5.

Then select "Choose from your computer's list of device drivers" and click Next. 6.Select the second item, "Qualcomm Atheros, AR9285".

7.When this page pops up, we click on the lower right corner to see if we can fix the problem that the win10 wireless network is not available.

Extended Information: Hello, please try the following solutions to see if you can solve this problem:1

Use the following link** to uninstall the driver for the older version of the wireless card corresponding to your device model: Intel WLAN Wireless Card Driver Version Wireless Card Driver Uninstall the wireless card driver that prompts the exclamation point via Device Manager. 3.

4.Restart the device and see if the wireless card function can return to normal. Hopefully, this reply will help you.

1. Enter the desktop, right-click on this computer - it belongs to the source cluster file.

2. Go to Properties and click Device Manager.

3. Find the network adapter in Device Manager.

4. Find the wireless network card, right-click, and select Uninstall Device.

5. A pop-up window appears, if there is a checkbox to delete the driver, check it together, and click OK.

6. Re-click the operation above - scan hardware changes Zheng Hail.

7. After the scan is complete, right-click on the wireless network card and select Update Driver.