How much is the price of anti corrosion and anti rust paint for steel structures

XDY-FX steel structure anti-corrosion and anti-rust paint is a special or mainly used for carbon steel, cast iron and other types of steel structures, equipment, pipeline anti-rust paint varieties. XDY-FX steel structure anti-corrosion and anti-rust paint is mainly composed of resin, anti-rust pigment, physique pigment, additives, solvents, etc. XDY-FX steel structure anti-corrosion and anti-rust paint special anti-rust paint varieties are:

Red Dan, iron red, alkyd, etc., alkyd and epoxy are the two most common types of resin paints for antirust paints. In addition, most of the anti-corrosion primers used in steel structures also have better anti-rust properties, such as epoxy zinc-rich primers, inorganic zinc-rich primers, inorganic zinc silicate primers, etc.

Manufacturer: Shijiazhuang Xin Dingyan Material Science and Technology ****.

Brand: Qirun brand.

**: 16 35 yuan kg. Due to the different specifications of XDY-FX steel structure anti-corrosion and anti-rust paint and the fluctuation of raw materials, there will be changes in real time.

When purchasing Qirun brand steel structure anticorrosive and anti-rust paint, please consult: Shijiazhuang Xinding Yancai anticorrosive coating factory sales staff.

Class. There are many types of anti-corrosion and anti-rust paint for steel structures, and there are the following varieties according to the different classification methods of resin and anti-rust pigments:

Classification by resin:

It can be divided into alkyd antirust paint, epoxy antirust paint, epoxy ester antirust paint, acrylic antirust paint, polyurethane antirust paint, chlorinated rubber antirust paint, phenolic antirust paint, inorganic salt antirust paint, etc.

According to the classification of anti-rust pigments:

It can be divided into: iron red anti-rust paint, red dan anti-rust paint, zinc phosphate anti-rust paint, gray anti-rust paint, zinc yellow anti-rust paint, asphalt anti-rust paint, silver powder anti-rust paint, zinc-rich anti-rust paint, etc.

Construction references. 1. Air spraying, brushing and roller coating are all acceptable.

2. The substrate should be cleaned before use, free of oil, dust, rust, etc.

3. The viscosity can be adjusted with XDY-FX diluent.

4. When spraying the topcoat, if the gloss is too high, it must be sanded evenly with 120 mesh sandpaper or constructed before drying after the surface of the previous paint is dry.

5. XDY-FX steel structure anti-corrosion and anti-rust paint cannot be directly used on zinc and aluminum substrates (XDY-H epoxy zinc yellow primer is required for zinc and aluminum substrates), and the weather resistance is poor when used alone, so it should be used in conjunction with the topcoat.

Nantong Zhengdao (NTAD) steel structure is first-class in anti-corrosion.

It can be used under anti-rust wax, anti-rust wax is very good, and it can solve many anti-rust problems that cannot be solved by anti-rust paint and anti-rust.

Steel structure production and installation labor cost per ton:

Material cost + loss 3% + production 1000 to 1300, installation 400 to 600 + transportation + tax management fee, general standard workshop, color steel 3 to 10 yuan per square meter.

How much is a square meter of steel structure rust removal and painting.

Material cost + loss 3% + production 1000 to 1300, installation 400 to 600 + transportation + tax management fee, general standard workshop, color steel 3 to 10 yuan per square meter.

General steel structure paint labor cost: according to the budget——— 58 square meters of tons of steel structure (small steel structure), primer, topcoat twice (bottom, topcoat are according to the square), labor cost of 10-16 yuan square (including rust removal). The cost of paint --- calculated according to the nature of the specific paint.

1. 12 yuan flat package, more than 1,000 square meters 2, 16 yuan flat package, more than 500 square meters.

Third, no matter how small it is, you can directly do it according to the above.

Fourth, or point workers in Beijing oilers are around 240-280.

The wrought iron fire staircase originally had paint, the paint was sanded off, and the paint was painted on 2 floors, so how much one square meter was needed for light work.

This original pattern board with paint and stepping is not very polishing, 16 square meters is not a loss.

Originally, there was paint that needed to be smoothed and so on, and the minimum estimate was 12 square meters.

Steel structure rust removal standard: the surface should be free of visible dirt, grease and poorly adhered scale, paint coating, rust, and impurities. No visible grease, dirt, scale, rust, paint coating and impurities are basically removed, and the residue should be firmly attached.

There are no visible oils, scales, dirt, paint coatings, and impurities, and residue traces show only slight pigmentation or punctation in the form of streaks. Article 8 of the Regulations on the Quality Management of Construction Projects Article 8 The construction unit shall, in accordance with the law, conduct bidding for the survey, design, construction, supervision and procurement of important equipment and materials related to the construction of the project.

How much is a square meter of steel structure rust removal and painting.

How much is a square of anticorrosive paint.

Kiss! The steel structure is derusted and painted, 30 yuan per square meter.

It is to make anticorrosive paint on the steel pipe, with a diameter of one meter and four.

Kiss! The labor cost of steel structure painting is 7-12 yuan per square meter, and the labor and materials are 20-35, depending on what paint and working environment are used. This fee does not include the cost of grinding and rust removal.

Three to seven centimeters thick.

Kiss! If it's three to seven centimeters thick, it's 45 yuan square.

Can you do it fifteen, labor costs, not packaging materials.

Kiss! If you don't pack the materials, you can do it!

How much can be done with contractors and materials?

Kiss! 25 contractors and materials can do!

The surface should be free of visible dirt, grease, and poorly adhered scale, paint, rust, and impurities. No visible grease, dirt, scale, rust, paint coating and impurities are basically removed, and the residue should be firmly attached. There are no visible oils, scales, dirt, paint coatings, and impurities, and residue traces show only slight pigmentation or punctation in the form of streaks.

Article 8 of the Regulations on the Quality Management of Construction Projects Article 8 The construction unit shall, in accordance with the law, conduct bidding for the survey, design, construction, supervision and procurement of important equipment and materials related to the construction of the project.

1. Epoxy primer: suitable for primer coating of steel structures, with good corrosion resistance and adhesion Lu Hong, which can enhance the anti-rust effect.

2. Polyurethane coating: suitable for the middle coating of steel structures, with good anti-ultraviolet and anti-aging capabilities, and enhance the durability of steel structures.

3. Iron red paint: suitable for coating the surface of steel structure, mainly containing iron oxide pigment, with good concealment and anti-rust effect.

4. Inorganic silicate coating: suitable for steel structures under high temperature conditions, mainly composed of inorganic substances such as silicate, with good fire resistance and rust resistance.

5. Polyester powder coating: suitable for electrostatic spraying of steel structures, with good weather resistance, gloss and coating uniformity, suitable for large-area coating.

Here are some things to look out for:

1. Surface treatment: Before construction, it is necessary to clean, polish, and remove rust on the surface of the coated object. Poor surface treatment will affect the adhesion and corrosion resistance of the coating.

2. Choose the right coating: choose the appropriate paint type and brand according to the material to be painted, the use and the environment. At the same time, it is necessary to pay attention to the quality and proportion of the coating.

3. Coating environment: high temperature, humidity, strong wind and other conditions should be avoided during construction to ensure the quality and construction effect of the coating.

4. Coating skills: In the process of painting, it is necessary to spray or brush evenly, and there can be no missing brushes, multiple brushes, dripping and other situations to ensure the beauty and quality of the coating. At the same time, it is also necessary to pay attention to the control of the coating thickness.

5. Protective facilities: In order to avoid coating polluting the environment or injuring personnel, protective measures should be set up, such as using sprinklers, wearing protective clothing, and setting up a cordon to prevent cracks.

6. Environmental protection requirements: environmentally friendly coatings and solvents should be selected to reduce VOC emissions and protect the environment and health.

There are many types of anticorrosive paints for steel structures, including:

Epoxy paint: epoxy primer, epoxy topcoat, epoxy intermediate paint, epoxy micaceous iron intermediate paint, epoxy coal asphalt paint, epoxy phenolic paint, epoxy glass flake paint, epoxy zinc phosphate primer.

Polyurethane paint: polyurethane topcoat, polyurethane primer, acrylic polyurethane topcoat alkyd paint: alkyd antirust paint, alkyd magnetic paint, alkyd blending paint, alkyd primer fluorocarbon paint: fluorocarbon topcoat, fluorocarbon metallic paint, fluorocarbon baking paint.

Acrylic paint: acrylic topcoat, acrylic metallic paint, acrylic primer, zinc-rich primer: epoxy zinc-rich primer, inorganic zinc-rich primer, cold galvanized paint Other anticorrosive paints: chlorinated rubber paints, perchloroethylene paints, high chlorinated polyethylene paints, epoxy vinyl paints, polysiloxane topcoats.

The application of anticorrosive paint needs to analyze the working conditions, coating facilities, corrosion factors, etc., and select a reasonable supporting system.

Commonly used supporting schemes:

Generally anti-rust paint! Hardware and building materials are sold in the market! I see.

Summary. The specific anti-rust period is judged according to the type of paint, the use environment, and the supporting paint. Ordinary anticorrosive paints use red dan antirust paint, iron red antirust paint, alkyd paint and other anti-corrosion years are about 3-5 years.

Heavy anticorrosive paints epoxy zinc-rich primer, epoxy micaceous iron intermediate paint, and fluorocarbon paint can be theoretically up to 20 years. If the topcoat uses chlorinated rubber, acrylic polyurethane paint, etc., it can reach about 10 years. It depends on what kind of environment and what kind of supporting scheme.

Hello, I have a basic understanding of your question, and I am working hard to sort out the answer for you! Please wait a moment!

The specific anti-rust period is judged according to the type of paint, the use environment, and the supporting paint. Ordinary anticorrosive paints use red dan antirust paint, iron red antirust paint, alkyd paint and other anti-corrosion years are about 3-5 years. Heavy anticorrosive paints epoxy zinc-rich primer, epoxy micaceous iron intermediate paint, and fluorocarbon paint can be theoretically up to 20 years.

If the topcoat uses chlorinated rubber, acrylic polyurethane paint, etc., it can reach about 10 years. It depends on what kind of environment and what kind of supporting scheme.