What are the precautions during the use of dust specific industrial vacuum cleaners?

A variety of different models and specifications of vacuum cleaners, their structural performance, functional characteristics are not the same. Therefore, the purchased vacuum cleaner must be carefully read before use to avoid damage to the vacuum cleaner and endanger personal safety due to improper use.

2.Industrial vacuum cleaners should be used in a dry room or similar environment at an altitude of no more than 1000 meters, with good ventilation, an ambient temperature of no more than 40 meters, and no flammable or corrosive gases in the air.

3.Before use, the hose should be properly connected to the suction port of the shell, and the hose should be tightly connected to each section of the extra-long pipe and the nozzle at the end of the pipe, such as furniture brushes, crevice nozzles, floor brushes, etc.

With the development of social industry, environmental pollution, enterprise safety production and other problems are becoming more and more serious. When the operating environment of the enterprise contains dust and has the conditions for the occurrence of the first grade, there will be greater potential safety hazards in the production of the enterprise. At this time, enterprises need to use industrial dust vacuum cleaners.

However, in the actual operation of enterprises, the vacuum cleaner sometimes has a clogged pipe. So, what is the cause of clogged pipes in industrial dust vacuum cleaners?

When the enterprise is operating, if you do not pay attention to the maintenance of the industrial dust vacuum cleaner, then it will affect the actual service life of the vacuum cleaner. Under normal circumstances, the ** of industrial dust vacuum cleaners is often higher, and once damaged, it will bring greater losses to enterprises. Understanding the causes of clogged pipes and dealing with them in a timely manner will help businesses run smoothly.

Although industrial dust vacuum cleaners can operate 24 hours a day, they are not suitable for long periods of work. If an industrial dust vacuum cleaner works endlessly, then it can cause damage to the vacuum cleaner. At this time, it may cause the pipe of the industrial dust vacuum cleaner to be blocked, which is not conducive to the production of the enterprise.

Therefore, manufacturers need to avoid overloading industrial dust vacuum cleaners for long periods of time, so as to maintain the pipes and other devices of the vacuum cleaners.

In addition, when working in enterprises, the installation and operating conditions of industrial dust vacuum cleaners may be adjusted. Although these belong to the details of the industrial dust vacuum cleaner, when these details are changed, it will affect the original operation traces of the industrial dust vacuum cleaner. Once the operation traces of the vacuum cleaner are changed, it will cause many discomforts of the vacuum cleaner, and it may also cause pipe blockage.

1. When vacuuming industrial vacuum cleaners, please install the dust separator (or paper bag, cloth bag) and filter element correctly on the machine to ensure that the filter is dry, and clean the garbage in the dust bin after each use. Dust on machines and filters.

2. When cleaning the filter, remove the filter cartridge and dust, blow it clean from the inside with compressed air, or wash it with water, dry it and use it again. (Do not use compressed air to blow directly from the outside onto the inside of the filter.) It is recommended to purchase and replace a dust cloth on a case-by-case basis.

The duration is (3-12 months).

3. If the industrial vacuum cleaner sucks in a large amount of water (or liquid), be sure to remove the dust chamber (or paper bag, bag) and filter element, and then use the vacuum cleaner to suck the water. If the suction power is significantly reduced during use, please turn off the machine in time and remove the dust separator and HEPA filter for cleaning. Check the hose extension for blockages, then install the HEPA filter and dust separator.

4. If there is no head installed on the machine, please turn the machine or bucket upside down; And avoid collisions and hits with the nose.

5. It is strictly forbidden to inhale flammable and explosive dangerous goods, otherwise it will cause danger.

6. The device cannot perform frequent power-on and shutdown operations.

7. If you find that the sound of the machine changes or there is a peculiar smell, please stop the machine immediately or notify the seller.

1. There are many brands, types and models of working vacuum cleaners, and each different model of industrial vacuum cleaner has different characteristics. Before using it, the operator must carefully read the instruction manual that comes with it.

2. Do not use the industrial vacuum cleaner in an environment of more than 40 degrees Celsius, nor in places above 1000 meters above sea level, otherwise the motor of the vacuum cleaner may be burned out.

3. Connect the ground wire to ensure the safety of operation.

4. Working vacuum cleaners are divided into dry vacuum cleaners and wet and dry vacuum cleaners. Do not use a dry vacuum cleaner to suck water.

5. Clean up the garbage in the dust storage bin of the industrial vacuum cleaner and remove the garbage on the filter in time to reduce unnecessary loss.

1. Before using the vacuum cleaner, check whether all the parts are in good condition, and repair the damaged parts in time if they are found, and whether the power cord is leaking.

2. When using a vacuum cleaner to clean up, clean up the relatively large garbage in the site first, and avoid sucking into the vacuum cleaner to block the suction outlet or pipe.

3. The vacuum cleaner cannot be used to absorb humid dust and some gasoline chemical liquids, which can easily damage the vacuum cleaner.

4. It is best to add lubricating oil to the electromechanical bearing of the vacuum cleaner regularly every month to avoid damage to the pumping.

5. If you do not use the vacuum cleaner, the vacuum cleaner should be placed in a dry and ventilated place to avoid moisture.

1. Do not suck metal and wet objects, so as not to cause fire due to leakage and short circuit.

2. After the vacuum cleaner is used, the filter bag should be cleaned, otherwise the dust inside will accumulate more and more, which will affect the heat dissipation effect, so that the temperature will rise too quickly and accidents will occur.

3. After the vacuum cleaner is used, it should be put away and stored after it is cool, so as to avoid accidents due to the heat not being dissipated.

4. The vacuum cleaner should not be close to fire sources and other high-temperature places.

5. Do not use the vacuum cleaner to suck water or other liquids, nor wash the vacuum cleaner with water.

6. After each cleaning, be sure to unplug the power plug and do not pull the power cord too hard.

7. Do not fold the vacuum cleaner hose frequently, and do not overstretch and bend.

8. If the host is hot, emits a burnt smell, or there is a vibration and noise, it should be repaired in time and not reluctantly used.

9. Do not use a vacuum cleaner to suck tiny particles such as cement, gypsum powder, wall powder, etc., otherwise it will cause malfunctions such as blockage of the vacuum cleaner's dust bag or filter screen, and motor burnout.

10. After wiping the vacuum cleaner, it should be put in the air to dry naturally.

1. The household vacuum cleaner should be handled gently, and the garbage in the bucket should be cleaned up in time after use, check whether there is perforation or air leakage, and use detergent and warm water to thoroughly clean the dust bag and air dry, and avoid using undry dust bags.

2. Pay attention to the hose of the vacuum cleaner should not be disassembled frequently, do not overstretch, and the vacuum cleaner should be placed in a ventilated and dry area.

3. Household vacuum cleaners should not be used to suck banana water, cigarette butts, needle tombs, and other things to avoid damaging the vacuum cleaner.

4. If there is a foreign object blocked during use, it should be shut down immediately for inspection, and the foreign body should be cleaned before use.

5. It is best not to use the household vacuum cleaner for more than 2 hours continuously, which is easy to cause the motor to overheat and affect the service life.

Nowadays, smart home appliances have begun to enter our family life, from automatic washing machines to smart air conditioners and then to vacuum cleaners. The emergence of vacuum cleaners has liberated our working hands, but there are still many things that need our attention when using vacuum cleaners, so as to ensure the safety of our lives. Today, let's introduce the precautions for using a vacuum cleaner, come and see if you have made mistakes?

1. Clean along the direction of the carpet.

When using a vacuum cleaner to clean the carpet, move it in the direction of the carpet so that the dust can be sucked up to keep the carpet wool flat and not damage the carpet.

2. Intermittent use.

When using, the hose, nozzle and connecting rod interface should be fastened, especially the small gap nozzle, floor brush, etc., special attention should be paid to the need to stop every half an hour if used for a long time. Generally, continuous work should not exceed the hour. Otherwise, continuous work will cause the motor to overheat, and if the machine does not have automatic cooling protection, it is easy to burn out the motor and affect the service life of the machine.

If the host is hot, emits a burnt smell, or has abnormal vibration and noise, it should be repaired in time and should not be reluctantly used.

3. Check for abnormalities in a timely manner.

If there is an abnormal noise when using vacuuming, or if you do not vacuum, check it in time, or send it to the vacuum cleaner to pay attention and put it in a dry place. Do not wipe the switch with a damp cloth when cleaning, otherwise it may cause leakage or short circuit. The motor has the function of overheating and power-off protection, which is the self-protection of the machine, which is not a problem.

When the machine opens the hind limb collapse, the motor runs at high speed (about every second), it will generate a certain amount of heat, and the temperature rise is about one degree under normal circumstances, and the protection temperature is two consecutive minutes.

Fourth, clean up the dust bags and debris.

After use, the debris in the barrel and the dust accessories and dust bags should be cleaned up in time. And clean after each work, check whether there are any holes or air leaks, and thoroughly clean the dust grid and dust bag with detergent and warm water, and air dry, do not use undry dust bags. Pay attention to the hose should not be folded around frequently, not overstretched and bent, and the vacuum cleaner should be stored in a ventilated and dry place.

5. Avoid dangerous items.

Do not use a vacuum cleaner to suck gasoline, banana water, cigarette butts with fire, broken glass, needles, nails and the like, and do not suck wet objects, liquids, sticky objects, and dust containing metal powders to avoid damage to the vacuum cleaner and accidents. During use, once a foreign body is found to block the straw, it should be turned off immediately for inspection, and the foreign body should be removed before continuing to use.

The above is the precautions for using vacuum cleaners shared for you, I hope it will help you.