How to record headsets, and are there any headphones that can record?

Just use the red plug on the headset and plug it into the red hole in the case, and then use the green plug of the speaker to plug it into the green hole in the case!

Double-click the small speaker in the lower left corner of windows,Call up the audio properties,Here's a MIC,That's the meaning of the microphone,Generally the default state of the microphone is muted,Just remove the small check mark in front of the "mute"。 If it is a simple recording, you can use "Start - Program - Accessories - Entertainment - Recorder" to record.

The default recording time is 1 minute, but if you want to record longer, you can click on the recording again when you are about to record 1 minute, and so on and so on to extend the recording time.

If you want to improve the clarity of the sound, you can go to the recorder - click "File" - Properties - "Convert Sound Format Now" - select "CD Quality" - OK. There are three holes in the back of the computer. The top is generally the output (that is, connected to the speaker), and the bottom is the input (that is, connected to the microphone).

If you want to record the accompaniment of the computer, find a double-ended plug cable, and connect the output hole with the middle hole, that is, the output is used as the input. (Not the one who received the input at the bottom).

Note: Some computers are weird, just plug the middle hole into the cable, and you're good to do it (you don't need to connect it to the top output hole). That is, it can be blocked.,This can,You can hear the speaker**,The computer will also input the sound into the recording software。

I used to look for song recordings on the Internet, and that's it, hehe).

Also, bring up the audio in the control panel and change the recording selection from "Microphone" to "Line-in".

The next recording software will do it.

Yes, you usually need a headset with a microphone.

As long as the microphone on the headset is good, it's fine.

1.If it is an in-ear type, there will generally be a small box with holes on the line.

2.The headset has a microphone sticking out.

If the headset has a microphone, the headset is connected to the computer is plugged into the green jack, and the microphone is connected to the pink jack.

After connecting it, you can open the recording software again.

3.How to set it: the small speaker in the lower right corner - right click - recording device - double click the microphone or dot attribute - you can adjust the volume of the microphone and the microphone enhancement in the level (this is adjusted appropriately, and some computers will have current sound).

Select Noise Suppression and Echo Cancellation in Enhancement, and select Listen to this device in Listening, and you can hear your own voice (don't choose this normal use, some computers will freeze or have noise).