Are CMW500 and IQXEL 80WiFi tested consistently?

This is a sign that there is a problem with the wireless settings of your router.

1. First of all, go to the router to confirm whether the wireless function is turned on, not that the router has a routing function to turn on the guess Zheng wireless module, and some have to be manually turned on. 2,Whether the SSID is released,Is it an open signal or a hidden signal,If it is hidden, you have to manually enter the SSID on the computer to establish a connection,3,Whether there is a password,Whether there is a mistake in capitalization,Whether the encryption mode is wrong,WPA or WPA2 and the like should be set up with the router。 4. More professional questions, whether your wireless router puts 11A or 11B G N signal, the computer's network card must also work in 11A or 11 B GN these two modes.

BG is the same frequency band, frequency band. 11A is the frequency band of 5G, which is not shared, and BG is generally used, because BG modules are cheap and are supported by manufacturers). It doesn't matter if the channel, the channel only needs to be auto, it only affects your signal strength, not the connection.

China Mobile's professional WLAN engineers are at your service.

The reason may be due to the congestion of the router wifi at the home of the chain bureau, restart it, and connect it again.

Here's how:

Turn off your wireless router.

Connect after restarting.

2.Connect the computer to the router through a network cable and log in to the router's management interface.

3.Fill in the upper and lower case letters of the password.

4.The network settings of the mobile phone or router are abnormal. Consider restoring your router to factory settings.

and cellular settings.

5.Make sure your phone is on the Wi-Fi.

Within the coverage area, click "Scan" to refresh the list of Wi-Fi networks.

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

2: What should I do if I search for a wireless signal and the connection is unsuccessful.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above does not contain the absolute solution: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, although Cong Town is connected to the wireless network; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

1) The wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password connection in the mobile phone [Settings] - [Wireless LAN] - [Search for other networks].

2) If the router is faulty, try to restart the router.

2. Prompt that the connection to the wifi is refused, and the fault phenomenon: others can be connected, but they can't connect to the wifi, and the connection is refused. Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac];

2) If the router is faulty, try to restart the router.

3. The mobile phone connection to wifi prompts that it has been saved, but the connection fails. The solution is as follows:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended that the world shed reset the password and encryption type of the router, and the terminal connecting to this network needs to [ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

Check it out like this:

2. Reseat the network cable once.

The network cable connected by the cat is connected to the WAN port of the wireless router, and the computer is connected to any LAN port of the wireless router.

3. Turn off the cat and the wireless router and turn them on, and take a look later.

Fourth, if it still doesn't work, set up the wireless router again.

Need to dial up the broadband cat to connect the wireless router and you do it:

Plug in the wireless router, don't pick up the cat first, reset the wireless router (restore the factory), connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (on the label on the back of the router), enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method.

Then set the SSID, encryption method, and password. Save, restart.

After setting, connect the network cable from the cat god blind lan port to the WAN port of the wireless router.

To solve this problem, first clear all the network settings on your computer. In other words, a blank sheet of paper for the most beautiful picture.

Then, you go in order. First, set up the wireless router through a wired connection. Then unplug the network cable and establish a wireless network connection.

The preferred network inside is all removed. Set the connection to be mega-slippery, and set the IP address to automatically get the IP address.

Then the family wax, turn off again, and turn on again. Let's see if it's good.

To put it simply, when you don't know what the problem is, set it up from scratch. It's not a hassle anyway.

1. If you can't connect, there will be a Tichang bend, and you can use your mobile phone to check it and prompt what content.

3. You can check whether you have forgotten to pay the fee and it is due.

4. You can turn off the router grip and wait for a few minutes before turning it back on.

What should I do if the wifi in the home forest is not connected to the shirt?

Tools Raw materials.

Wireless routers for computers.

Method steps.

1. In the address bar of the browser, type "press the enter key." (The specific information can be found on the back label of the wireless router.) ）

2. Enter the username and password to log in to the wifi.

3. On the settings page, click "Wireless Settings", click "Wireless Security Settings", select "WPA-PSK WPA2-PSK", enter the password you want to modify in the box after "PSK Password", enter the completed entry, and click "Save".

4. Complete the password change of the open wifi, select your own wifi in the wifi list, and enter the set password to connect.

If connected.

1.Open any browser and type.

2.**Requires a username and password, both default admin3After logging in, the "Setup Wizard" will pop up, click "Exit Wizard" at the bottom right

4.The home page will display "54M Wireless Broadband Router" (Note: the mobile phone screen can be reduced to see the whole picture).

5.There is a column on the far left, click on the fourth "Wireless Parameters".

6.The "key" will be displayed, which is the password.

Change the router to not open and set a password.

You're bad, the password.

The specific steps to change the password of open wifi are as follows:

The materials we need to prepare are: computers.

1. First of all, we open the browser, enter " in the browser address bar, and press enter to confirm.

2. Then we enter the username and password in the page and click the "OK" option.

3. After that, we click "Wireless Settings" on this page, then click "Modify Administrator Password", select "WPA-PSK WPA2-PSK", enter the password you want to modify in the box behind "PSK Password", enter it completely, click on the "Save" option, and then we select your own WiFi in the WiFi list, enter the setting password to connect.

The one with 5G is sent from the same router as the hotspot you are connecting to now, and the CMCC one may be the wifi function of the mobile optical modem.

1. In the address bar of the IE window, enter, and click "Go" to open the dialog box that asks for a username and password.

2. Enter "admin" in the username and password text boxes respectively, and confirm to open the configuration interface of the user.

3. In the routing network connection wizard, select "WAN port", "PPPOE protocol" (note not to select dynamic and static), then enter your telecom broadband account and password, and select in the advanced options: automatic dialing. After the configuration is complete, turn off the power of the router and restart it.

Handling 5G is one step faster, the traffic is half cheaper than 4G, the broadband speed is 500M, and it is convenient and fast to log in to the online business hall of Guangxi Telecom to handle broadband, number card, traffic package, etc. with one click. Customer service number 156 will answer for you.

Enter in the browser or the address is different because some routers have different settings. Each router can link 4-6 wifi numbers. Look at the configuration of your own router...

In the router settings configuration that you can set and see your own wifi hotspot name and password.

You can check it by typing it in the browser, and you can check it on your mobile phone and computer.

Do you use a router at home? Is there wireless function? If you have it, there is a password to log in to the router directly on the back of the router, you can take a look at it and log in to the router to set it up, or find it yourself through the wireless network search function of your device.

Go upstairs to your router and look at your router name, and then take the wifi and search for the corresponding router name.

2. Select the setup wizard on the left column, select PPPoE (ADSL virtual dialing) after the next step, click Next, fill in the dial-up account and password for Internet broadband, and continue to the next step.

3. Turn on the wireless state, continue to the next step, select "Turn on wireless security" in the settings, fill in the wifi password (the password cannot be less than 8 characters) in the PSK password column, and click Finish in the next step, so the WiFi network and password have been created.

The encryption of the router needs to be set in the router web page settings page - wireless settings, and the specific operation steps are as follows:

2. After entering the main interface of router settings, find the wireless settings option and click "Wireless Settings".

3. After entering the wireless settings page, click to cancel the wireless broadcast setting and set the basic wireless network parameters of the router.

4. Then set the wireless name and wireless password, and click Save after the setting is completed.

5. After setting up the router, you need to restart the router to make the router configuration take effect.

WiFi generally belongs to the wireless signal emitted by the wireless router called wifi, and the wifi encryption of the wireless router is different according to different routers, but the encryption is basically the same.

Taking TP-Link wireless router as an example, when entering in the browser, the login and password are admin by default.

Find the wireless settings, wireless security settings, select the WPA-PSK WPA2-PSK encryption method, and enter the password to be encrypted.

In general, it is recommended to use a mix of alphanumeric encryption.

The login method of different wireless routers is usually marked on the back of the router or in the manual.

2. Then enter the official website.

3. After entering the official website, enter the login password.

4. Then find the wireless settings function and click to select the wireless security settings.

5. Select WPA-PSK WPA2-PSK, and then set the PSK password.

6. Finally, click Save at the bottom, and you're done.

Wireless Internet access can be simply understood as wireless Internet access, almost all smartphones, tablets and laptops support wireless fidelity Internet access, is the most widely used wireless network transmission technology today. In fact, it is to convert the wired network signal into a wireless signal, as introduced at the beginning, using a wireless router for the relevant computers, mobile phones, tablets, etc. that support its technology.

If the mobile phone has a wireless fidelity function, when there is a Wi-Fi wireless signal, you can access the Internet without going through the network of China Mobile Unicom, saving traffic fees.

Wireless network wireless Internet access is more commonly used in big cities, although the wireless communication quality transmitted by wireless fidelity technology is not very good, the data security performance is worse than Bluetooth, and the transmission quality needs to be improved, but the transmission speed is very fast, can reach 54Mbps, in line with the needs of personal and social informatization.

The main advantage of wireless fidelity is that it does not require wiring, and it can not be limited by wiring conditions, so it is very suitable for the needs of mobile office users, and because the transmission signal power is less than 100MW, which is lower than the transmission power of mobile phones, wireless fidelity Internet access is relatively the safest and healthiest.

However, the wireless fidelity signal is also provided by the wired network, such as ADSL at home, community broadband, etc., as long as you connect a wireless router, you can convert the wired signal into a wireless fidelity signal. Many cities in developed countries abroad are covered with wireless fidelity signals provided by ** or large companies for residents to use, and there are many places in China that implement the "wireless city" project to promote this technology. In pilot cities where 4G licenses have not been issued, many places use 4G to wireless fidelity for citizens to try out.