-
You can find it on the city** catch-up network.
-
Plumber door-to-door maintenance **13003427385.
Dachang locals, professional door-to-door water and electricity maintenance, water pipe maintenance, faucet maintenance, bathroom maintenance, sanitary ware maintenance, sanitary ware maintenance, circuit maintenance and installation, hydropower transformation, water and electricity installation, installation basin toilet, bath bomb shower, towel rack, bath towel rack, ceiling lamp, chandelier, vegetable pot, vegetable basin drainage, triangular felling, faucet, etc.
Repair of strong current box leakage tripping, poor contact, TV ** transformation, etc. Handle things, quality and quantity. Don't be too troublesome, leave a **, in case you need it. Undertake one-stop service of decoration design.
Basic knowledge of plumbers:
Before construction, it is necessary to make layout drawings for electrical, water supply and drainage. The installation of the luminaire should be carried out after the painting is completed. Lines with different voltages, different circuits, and different signals are strictly forbidden to wear in the same conduit.
Hydropower design is first and foremost safe and practical, and secondly decorative. A list of all household appliances in the home and the determination of where they will be actually used. Because some small household appliances are on the ground, then they must be 300mm from the ground to reserve a socket, and some small appliances are on the cabinet, then they must be at least 1100mm from the ground to reserve a socket, which can only be confirmed by the owner.
The principle of hydropower design is that if it can be moved, it should not be changed easily; If it can be dark, it will be dark, and it is not allowed to pretend to have a bright line. Under normal circumstances, the installation of the empty modulus stove socket should be more than 2 meters above the ground, and the wire line should be more than 40 cm away from the gas pipeline.
Hydropower should be considered in the order of safety, environmental protection, energy saving, and practical effects, and should meet the needs of the owners to the greatest extent. Pipelines are generally in the form of concealed dressing, and pipe grooves are opened along the line after marking (except for gas pipelines).
The width of the pipe groove is generally about 1 5 times the diameter of the pipe, and the original structure is when the casting wall has no plastering layer, the depth of the pipe groove shall not be greater than 1cm, and the pipe groove is waterproof. The groove of the insulation wall is bent out of the U-shape with the iron mesh and embedded into the groove, and the U-shaped groove is wiped out on the surface of the iron mesh with cement mortar, and the cement in the groove is waterproof after 48 hours.
-
Question 1: How to find plumbers? It's very easy to find an electrician in a city, and you can go to a popular local forum or post on a post bar for help. In this way, the chance of finding it is relatively large, and it is best to find an acquaintance to introduce it, and it is also more reliable.
Question 2: **Find a plumber If it is in the village, every village has it, just ask the village chief, if it is a community, every urban community also has it, and the property knows. No, it's on, look for it.
Question 3: How to find a plumber number in your city Hello, it is very easy to find a plumber in a city, you can go to a popular local forum or post bar for help. The chances of finding it in this way are relatively large, but it is difficult to say whether you can find a plumber with a better level.
Good luck. Question 4: How to find a plumber I am doing engineering and hanging the local portal There are many young ones.
Question 5: How to find a plumber on the construction site There is an app called 58 Daojia, which seems to have an electrician coming to the door, and you can also find it in WeChat. Generally, factories, construction sites, shopping malls and residential property engineering departments, as well as many home appliance repair shops, lamp shops have electricians, as long as you give money.
Question 6: How to find a reliable plumber If you don't understand, you can find an acquaintance to see, and if you do, you will open it as soon as they work.
Question 7: How to find a job as a plumber? 40 points dear, you can post recruitment information in 58.com, or Ganji.com, **Everyone has it, good luck.
Question 8: Looking for a plumber to decorate a house? Find a plumber on 58.com, which is the largest recruitment platform. Where to find a job, search for "58.com recruitment", such as: Beijing 58.com recruitment.
Plumber Job Description Requirements:
1. Job responsibilities: be able to bear hardships and stand hard work, and obey management. Complete daily tasks according to quality and quantity.
2. Have 3-5 years of experience in electrical installation at construction sites, work experience in bridge installation, distribution box installation, cable crimping, line inquiry, and familiar with the maintenance and specification of temporary electricity on the construction site.
Question 9: The house is ready to be renovated, how to find a plumber by yourself? Now there are a lot of such companies, but there are few that do well, in order to avoid potential safety hazards in the future, or find a regular one, just this Ruijia hydropower e station pull.
Question 10: Why is it so difficult to find a plumber The reasons are roughly as follows:
Information is not available. There are a lot of plumbers who want to find a job, but I don't know where to find it? If you want to recruit plumbers, you don't know that there are spare plumbers.
Geographical restrictions. The place of work is far away from home, the cost of living is too high, and I am tired and tired to earn for half a day, but I can't leave a few small money.
The ideal salary is different. The amount of wages that a plumber wants is too different from what an employer is willing to pay.
Skills are not equal to salaries. The salary requirements of the high technology are high, and the employer does not see how the work is not believed that their work is worth it.
-
The installation and maintenance methods of water and electricity are as follows:
Check the wiring and socket to see if the wires are falsely connected, the socket is not in good contact or damaged, etc.
Inspect the circuit and lighting for poor or damaged lighting contact.
Check the wiring of the bathroom to see if there is any poor contact or leakage.
Check all kinds of drainage to see if the drainage pipes are leaking, clogged or broken.
Check the electric start and circuit to see if it is a starter, poor battery contact, fault light on, or line fault.
Check the opening ruler and the lamp to see if the switch is in poor contact or the lamp is burned.
Check high-power appliances such as air conditioners and water heaters to see if the noise is due to circuit overload, leakage or malfunction.
Check the power strips and sockets to see if they are in poor contact or damaged.
Inspect the circuit and lighting for poor or damaged lighting contact.
Check the wiring of the bathroom to see if there is any poor contact or leakage.
Check all kinds of drains to see if the drain pipes are leaking, clogged or broken.
Check the electric start and circuit to see if it is a starter, poor battery contact, fault light on, or line fault.
Check the switch and the lamp to see if the switch is in poor contact or the lamp is burned.
Check high-power appliances such as air conditioners and water heaters for circuit overload, leakage, or malfunction.
-
Hydropower "naked" is not concealed or surfaced, but a simpler way than "digging and talking", simple to do without any cherry skin tools to operate, simple to only need to have a certain knowledge of household electricity safety to do a good job, it is a popular hydropower installation method in our countryside many years ago——— ridge scattered bare.
-
Here's how you can find a plumbing installer:
2.Post job postings on social media to find experienced plumbing installers.
3.Ask friends, family, or neighbors for referrals to see if they know a reliable plumbing installer.
4.Check with your local building materials store or renovation company to see if they can provide plumbing and plumbing installation services or recommend workers.
-
You can find a plumber by breaking up in the following ways:
2.Ask neighbors, friends, or family if they know of a reliable plumber.
4.Check with your local building materials store or renovation company for a recommended water rambling electrician.
-
If you need a plumber to visit your home for repairs, you can do so by following these steps:
1.Identify issues that need to be repaired, such as leaking water pipes, faulty electrical circuits, etc.
3.Contact the service provider to explain your problem and schedule a repair visit.
4.Make sure your home is safe and turn off the power and water sources until the maintenance crew arrives.
5.When the maintenance personnel arrive, explain the problem in detail and have them inspect and fix the problem.
6.After the repair is completed, the empty book checks whether the work meets your requirements and pays for the service.
7.If you are not satisfied with the repair results, you can negotiate with the service provider to solve the problem or seek other solutions.
-
Summary. What do you need?
58.com water and electricity maintenance workers provide door-to-door service.
What do you need?
Range hood repair.
How to calculate hydropower installation** Hydropower installation knowledge.
Water pipeline installation, renovation, pressure and maintenance. Water supply pipes: rupture treatment of tap water pipes, transformation and replacement of galvanized pipes, installation, maintenance and replacement of aluminum molding pipes, composite pipes, PPR pipes, etc. >>>More
Hydropower decoration to go to the ground or to the top? Don't dwell on it, it's the right way to do it. >>>More
Step 1: Slotting.
Play the line first, then groove. The pipeline slotting must be parallel lines and vertical lines as required (if there are hydropower construction drawings, it is better to compare construction drawings). The pipes of the horizontal walking line must be controlled at a height of 60-90 cm (from the ground), and the pipes with faucets must be vertical. >>>More
Hydropower installation refers to the decoration process of replacing all or part of the waterways and circuits used by the original developer according to the decoration configuration, family population, living habits, and aesthetic concepts. Hydropower transformation is divided into waterway transformation and circuit transformation. Hydropower projects are hidden projects, so they must not be sloppy! >>>More