What should I do if the wifi signal at home is not good, what can I do?

If you are using a Huawei phone and the signal is weak after connecting to Wi-Fi, you can use the following methods to troubleshoot the problem:

1.It is recommended that you check whether the mobile phone uses a metal protective case, magnetic protective case, magnetic bracket or magnetic chuck, it is recommended to remove it, metal and magnetic materials are easy to interfere with the signal, resulting in poor mobile phone signal.

2.It is recommended that you move to an area with strong signal coverage on the router, as it will affect the signal if it is blocked or far away from the router.

3.It is recommended that you restart the router to see if the signal returns to normal.

The wifi signal in the room is not good, is there any way to solve it?

Place the router in an open location because the wireless signal of the router has different ability to penetrate the wall, and the signal strength of each model router itself is also different, so the number of router signals passing through obstacles should be reduced.

Microwave ovens, Bluetooth headsets, etc. are similar to the working frequency bands of routers, and most of them will interfere with the router signal, and large metal devices will also interfere with their signals. Therefore, the router should be placed away from household appliances and metal products.

A router that has been in working condition for a long time will accelerate the aging of its internal parts under the condition of continuous high temperature, which will affect the service life of the router. And if you don't turn off the router all the time, it will store a lot of garbage and information, which will slow down the signal transmission and affect the running speed. It's recommended to restart it regularly once a week to protect your device and clear your cache.

Cut off the bottom of the empty can, cut it vertically upward, cut off both ends but do not cut it, and put it on the router antenna.

1.If the house is small, it is recommended to place the router in the center of the home;

3.You can choose some powerful routers, or you need to install a power modem.

If the wifi signal at home is not good, you can consider changing to a new router. Or to raise the level of the net by one notch. There is also a restart of the optical modem, sometimes caused by Caton.

At this time, it may be that there is a problem with the settings, and you can restart your router.

If the signal is not good, it may be stolen by others, so it is recommended to hide your own network and change the password so that others don't know.

What to do if the wifi signal at home is always bad, open the settings and click on wifi.

The wifi signal in the room is not good, is there any way to solve it?

The router at home is in the living room, but the signal in the bedroom is relatively poor, then in this case, you can choose to buy a router with more power again. The reason why the signal in the bedroom is relatively poor is actually because the power of the router being used at home is relatively low, and the signal cannot penetrate the thick walls of the home, so changing to a high-power router can solve these problems. However, when replacing a high-power router, you need to consider the cost, and you also need to consider the damage of the high-power router to the human body, so the tool of the router is not as big as possible.

If the signal in the bedroom is poor, then you can consider buying a wireless signal amplifier, which is relatively cheap, about 80 200 yuan. After buying it back, you can directly plug the amplifier into the room, and then you can connect the signal amplifier to the wifi through the mobile phone, so that you can directly connect the wifi on the signal amplifier in the bedroom, and the effect is also very good. <>

Sometimes there are many obstructions in the room, or the walls of the home are in the middle of the router, so you can choose to use the terminal router in this case. The single router can solve the problem of poor signal in the house, and uses power line communication technology, which can directly convert the signal of the high and low frequency bands into the signal of the low frequency band, and at the same time can transmit the signal to every corner and area of the home. When choosing a terminal router, it should be unified with the brand of the original routing chain, so as to ensure compatibility.

If none of the above methods can solve the problem, then you can only choose to install a wired network in a room with a bad signal, which can be transmitted through a wireless router, so that the signal in the room will also be improved.

Move the location of the router: Place the router near the network equipment that you use frequently, preferably not in a corner, and not through a wall, iron door, etc.

The wifi network at home is particularly poor mostly because the wifi signal coverage is not enough, the use of repeaters can continue to connect the wireless network in the place where the wireless signal is weak or even disappears, solve the problem of signal blind spots, you can also upgrade the dual-band router, re-purchase the latest standard dual-band router, basically can completely complete the problem of bad wifi signal at home, if the wired broadband network speed at home is not enough, even if the wireless network environment is good, the wifi at home will not be too good.

Precautions for the use of wifi

The wifi router should not be placed on the floor, the wifi signal will weaken with the increase of distance, it will also be weakened when passing through solid materials, and the signal will also be weakened if it is blocked by the floor, it is best to place the router on a table or shelf, about one meter above the ground, so that the signal can better spread in the space.

Many people like to put their router on top of their TV, which will also weaken the signal. Most electrical appliances such as TVs, microwave ovens, induction cookers and other devices that directly emit electromagnetic signals will interfere with the WiFi signal; Refrigerators, air conditioners, and other devices that have large motors (compressors) inside can also interfere with signals during operation.

The solution to the bad wifi signal at home is as follows:1. The easiest way is to restart, many problems can be solved after restarting.

2. Updating the version of the router is also a good way to do it, and the updated software will keep it in the best condition.

3. When the router may have a default channel, when there are too many people using the channel, it will become crowded, and the network will be stuck, so change the channel in the router settings and switch to an uncrowded channel.