How do you park in a non grated park? How to open a non type parking space in a parking lot?

Method 1: Pendulum incline reversing method.

Step 1: First determine whether the parking space is "qualified", and if so, move slightly closer to the parking space. When the front wheel overtakes the parking space, start to turn the direction and let the car drive in the direction of the back to the parking space.

Step 2: Use the available aisle width to "tilt" the position of the car as much as possible. In this way, the angle between the car and the parking space can be reduced, thereby reducing the amplitude of the direction when reversing.

At the same time, the "swivel" of the vehicle allows the driver to look at two danger points behind the vehicle through the rearview mirror.

Step 3: When the left rear wheel of your car crosses the front of the left vehicle, the "danger point" is transferred to another place - the right rear corner of the car. At this time, the eyes should be shifted from the left side mirror to the right side mirror to determine whether the distance between the rear and the vehicle on the right is safe.

When you see a "gap" between yourself and the vehicles on both sides in the right side mirror, you have successfully passed all the danger points. At this time, you can continue to play the direction, adjust the backward trajectory of the car, and try to correct the storage.

It is lined up on both sides, leaving a passage in the middle. Like"None"The words are the same, the three horizontal represent the direction of the car, and the two vertical represent the middle passage.

This type of parking lot is the most common usually. Because when parking, the owner will focus more on the rear of the car, so the front part of the car will easily scratch the vehicle parked on both sides. So, when parking in this type of parking lot, it is best to reverse into the parking space so that the front of the car is facing the driveway.

This stops and avoids collisions with vehicles in the lane when reversing out of position. When parking, drive along the side of the parking space, and when the front part of the car exceeds the parking space, quickly hit the wheel diagonally forward, try to make the body and the parking space in a straight line, and then you can easily fall into the parking space.

If it is a parking space that meets the standards, under normal circumstances, you will start to hit the left slightly when you start, and pay attention not to touch the vehicle on the left, and when the A-pillar exceeds the front of the vehicle on the left, you can kill it to the left, and you can generally drive out.

If the gap is too small, you need to lift the car up to the right, then reverse into the garage, reposition the car as close to the vehicle on the right as possible, and then drive out according to the above steps.

The timing of the direction is related to your model, you need to judge for yourself, the wheelbase of the car (such as a commercial car) and the wheelbase of the car with a short wheelbase (such as a family car) are not the same, it is easy to master if you are proficient. Generally, the sedan chair only needs to exceed the A-pillar.

If you can't drive out once, then I suggest that you wait for the owner of the left car to come before leaving, it is estimated that it is very difficult to adjust the position of the vehicle with your skills many times.

Of course, you can also try fixed-point translational steering, which is more demanding for the car and driver. You are required to be a professional driver and that the performance of the vehicle is up to the mark.

In the past, the parking skills we learned in driving schools were reversing into the garage and side parking, but how much do you know about the increasing number of "non" zigzag parking spaces in life? What should we pay attention to when parking? What are the techniques to park in the "non" shaped parking space quickly, steadily and accurately?

The first step is to judge whether the left and right distance of the target parking space is sufficient, and after confirmation, slightly close to the parking space and control the distance between the sides of the car on the left and right. Make the angle between the car and the parking space less than 90 degrees, when the front of the car just drives through the parking space, play the wheel away from the direction of the parking space, so that the angle between the car and the parking space is less than 90 degrees. Make full use of the aisle space until the proximity vehicle is visible from the left side mirror and there is a gap.

The second step is to make the use of the space of the passage as much as possible, so that the angle between the vehicle and the parking space is further reduced, until the vehicle in position can be seen from the left rearview mirror and stops when there is a gap. Control the distance from the vehicle in position and then reverse backwards, change the steering angle appropriately when reversing, and control the distance from the vehicle in position.

In our daily life, we often encounter the situation that the passage is too narrow. In this case, we try to get as close to the side of the parking space as possible when parking, and if we can't get into the space at one time, we can move it a few more times. In this case, we try to steer by playing wheels on the spot.

In the third step, after crossing the parking space boundary line behind the left rear of the car, slow down the reversing speed and look into the right rearview mirror. When there is a gap with the vehicle on the right, adjust the steering angle appropriately, adjust the distance between the left and right vehicles, and try to make the distance between the left side slightly larger than the right side, so as to provide convenience for the opening door.

If it is in the "non" shape of the rear of the car, to grasp the actual size of the body, and then use the passage space as much as possible, so that the car parking has enough space, parking should be slow and not too impatient, resulting in the car being scratched.