WORD TABLE OF CONTENTS AUTO GENERATED AS WELL AS HEADER AND FOOTER ISSUES

First, when the table of contents is automatically generated, there is always a body of text mixed in it.

This problem arises because of the fact that the format is not the body, but the text with levels, and the specific correction and confirmation can be known through the following path:

Word Insert References Index and Table of Contents Table of Contents displays the outline toolbar

By the level of the outline, you can see how many levels of text your text is.

When you select "Clear Formatting" in the "Formatting Pane" for this part of the text, you can ensure that the content of the body text does not appear when it is automatically generated.

The text format of the second table of contents is different from the text below, and this question is the same as the question above. My suggestion is that you unformat everything and then you select the title you need to do the table of contents to "Level 1, Level 2, Level 3" and so on to suit your requirements.

The third is that when making a header, it is required to make a header in chapters, and a section break is used, but the header of two chapters always changes with the modification of the next chapter.

This problem is relatively easy, you use section breaks, (insert separators, page breaks, next page) on the header footer position selection to unlink to the previous section, and that's it!

If it doesn't work, hehe, my expression skills are too poor and need to be improved!

How to automatically generate a wps directory.

Material Tool: Word2010

2. Enter the header modification page. Move the mouse to the position shown, that is, to the middle of the margin, not too far from this area, otherwise the double-click will not work.

3. Modify the header. Select the content you want to modify and change "Classic Story" to "Short Story".

4. Return to the page. After the modification, move the mouse to an empty area and double-click the mouse to see the content as shown in the following figure. This page is successfully modified.

word inserts the header and footer, but the table of contents does not need to be inserted, you can insert a section break in the body part, and then set the header footer in the body part not to be linked to the previous section, and insert the header and footer separately.

The steps of the method are as follows:

2. The cursor stops at the beginning of the text, click "Header" in the insert toolbar, and select a desired header style.

<>4. With the header operation method, in the footer state, click to cancel the selected state of "link to the previous header", and the footer text of the body can be found, and the header and footer have been successfully inserted in word and the table of contents part is not inserted.

Then you just change the word document template, there are two ways:

1.First, store the template with header and footer you designed into the folder of the original template C: DocumentsAndSettings Administrator ApplicationData Microsoft Templates, such as named, Change the original template name *** other file names, change the designed template to the default template file name (;

2.To change the path of the user template, in the Tools Option File Location User Template, click Modify, and modify the file file to store the designed template file path.

A brand new Word document will not automatically add headers and footers. In your case, you belong to the default template with a header and footer. To cancel you can put c:

Documents and Settings Administrator Application Data Microsoft Templates; Or open to modify it, cancel the header and footer, and save it as the default template.

Here's the part that modifies the header, and I'll use the last page as an example.

2. Double-click the header to enter the last page, 3. There is a "link to the previous one" in the header toolbar to cancel.

4. Delete this header, or you can also find another one.

5. Delete blank pages.

5. The same is true for other page numbers, if you want each page to be different, you have to insert a separator, for example, if you insert a header on the third page, you must insert a separator.

Insert a separator on pages 2 and 3.

Word document.

You can double-click the header and footer.

Proceed to remove the lamp.

You can also cancel its space in the page settings.

Footnotes are not available in the Word View menu because footnotes are not included in your document. Here's how to add a footnote in Word: "Insert" menu - "References" - Footnotes and Endnotes" and select "Footnotes" in the pop-up window.

Once a footnote has been successfully inserted, the Footnote in the view menu is naturally optional.

The file header and footer have inserted page numbers inside.

In the view there is an option for the header and footer.

Double-click on the header and footer to enter the header and footer, and the specific operation should be operated by yourself.

Select View Header & Footer. See for yourself!

In word, the default is a section, the page number of each section is continuous, if you want to set the page number in a word document, the first 2 pages are not set with page numbers, and the page number is set from the 3rd page, you must insert a section break to divide the document into two sections, so that you can set the page number separately.

2. Double-click the mouse at the footer of page 3 to enter the footer state;

3. Click the header and footer --- link to the previous header button to disconnect from the previous section;

4. Click the header and footer tool to design --- page number--- set the page number format;

5. The page number format dialog box pops up, select the starting page number at the page number, and enter 1 in the input box;

Insert a section break before the first character of the third page, unlink the footer, and you're ready to go.

On the Page Layout tab, in the Page Setup group, click Separators. Click the type of section break you want to use.

Double-click on the area where the header and footer are located, delete the part you want to delete, and there are, you may need some pages, and some don't, then you need to add section breaks, and then more your requirements, choose whether it is the same as before.

Double-click the header and footer, select the content inside, click the delete key, and then close the header and footer.

Double-click on the header or footer, and you'll be able to choose what you want to delete.

1 Select Style & Format in Format

2 A "Style Formatting" column appears on the right, which mainly uses Headings 1, 2, and 3. Apply headings 1, 2, and 3 to the headings of each chapter in the text. For example:

The "Chapter 1 Introduction to Refrigeration" in the article needs to be defined by heading 1. The "history of refrigeration technology" is defined by heading 2. If there is, then use heading 3 to define it.

3 Of course, the properties of headings 1, 2, and 3 (e.g. font size, centering, bolding, etc.) can be modified by yourself. Modification method: Right-click "Title 1" and select "Modify", the modification menu will pop up, you can modify it according to your own requirements.

4 Use headings 1, 2, and 3 to define each section of the text. It is very convenient to define, just click the cursor to "Introduction to Refrigeration in Chapter 1", and then click on the title 1 on the right with the left mouse button, and the definition is done; The same method is defined by headings 2,3; And so on, and so on, and chapters 2 and 3 are defined in this way until the end of the full text.

5 When everything is defined, we can generate the directory. Move the cursor to the blank space at the beginning of the article where you want to insert the table of contents, and select [Insert] --References] --Index and Table of Contents].

6 Select the second tab [Table of Contents] and tap OK at the bottom right. That's it.

1 Before setting the table of contents, you need to set the text of the table of contents to the title No. 1 word, or the title No. 2 word, which is available in the font style.

2. In 07, it is the table of contents - insert the table of contents, you can choose a style, as for the page number you said, the system has already generated itself when inserting the table of contents.

3. In the future, you can change the content of the table of contents or increase the content of the text, and the page number in the table of contents has changed, you can click directly on the top of the table of contents and select Refresh the table of contents.

Click where you want to insert the catalog.

Point to References on the Insert menu, and then click Indexes and Catalogs.

Click the Table of Contents tab.

How to automatically generate a wps directory.

Page numbers start on any page.

1. Position the cursor at the top of the page where you want to start page numbering.

3. Select "View - Header & Footer" and position the cursor at the footer.

4. In the "Header and Footer" toolbar, perform the following operations in turn:

Click the Same as the previous button to disconnect the link from the same previous section.

Click the Insert Page Number button, and then click the Page Number Format button to open the Page Number Format dialog box.

Type the starting number in the box after Start Page Number.

Click the Close button.

Select the directory in the references, and after you get the settings right, the directory will be automatically compiled.

Steps. 1. Automatically generate table of contents preparation: approximate index.

1. If you want Word to automatically generate a table of contents, you must first establish an outline index that the system can recognize, which is the premise of automatically generating a table of contents. Check your title.

2. In the Start tab - select in the format - select your favorite directory format structure.

3. After selection, the outline index will be established, and at the same time, it will also have the default title format of word.

4. In the same way, we establish indexes of directory structures such as headings 2 and 3 step by step.

5. In the same way, we have established an outline index of all the titles in the entire document.

Steps. 2. Automatically generate and update the catalog.

1. The prerequisites are ready, and then we start to generate the directory. First, hover the cursor to the location where the directory is stored, and then click on the tab's references - Table of Contents - Auto Directory 1 or 2. Oak Honor.

2. The directory will be automatically generated.

3. If you have updated many articles, or the directory structure has been adjusted, then you need to update the domain of the directory, click the directory, and the right-click drop-down menu - update the field.

4. It is recommended to choose to update the entire directory, so that it will not be missed, click OK to update.

Custom table of contents formatting.

If you are not satisfied with the default directory format of the system and need to customize it, you can do that. No void Sakura clicks on References - Table of Contents - Insert Table of Contents. ​

There are a number of table of contents formatting options that you can set, such as whether or not to display pages, whether or not to right-align pages, and whether to display tabs.

Displays several levels, etc.

At the same time, you can also set the font size and format of the directory, as shown in the figure, click Modify - select the directory you want to modify - click Modify - you will see the relevant font, spacing and other related format adjustments, after customizing the modification, you can confirm.

When you have made all the custom settings, click OK, and a replacement prompt box will appear in the place of the just directory, click Yes.

Insert a separator at the end of each page, insert a different separator or section break as appropriate, then open the header and footer toolbar, click the "Link to previous button" button, and make the words "Same as the previous section" disappear in the upper right corner of the header or footer, and you can set each header and footer separately. I just learned it yesterday, and I did it.