How many square meters of soil is a load of soil, and how many kilograms of soil are in one place?

1400 kg of soil on one side. One cubic meter is equal to 1 cubic meter. Because one cubic meter is referred to as square, one cubic meter is equal to 1 cubic meter.

One square of soil is equal to 1400 kilograms. The density of soil depends on the density of soil particles, the size of the pore volume and the mass of water in the pore, which comprehensively reflects the material composition and structural characteristics of the soil.

The nature of the soilThe natural moisture content of soil indicates the degree of dryness and wetness of the soil, and refers to the ratio of the weight of water in the soil to the weight of soil particles in the natural state. The greater the water content of the soil, the more humid the soil, and the more unfavorable it is for construction. After excavation, the loose soil is destroyed, the volume increases, and even if it is compacted, it cannot recover its original volume, which is called the looseness of the soil, which is expressed by the looseness coefficient.

The volume in the loose state after the looseness coefficient excavation is called the imaginary square volume, and the volume that is not compacted after backfilling is called the loose filling volume. The ratio of the volume of soil seepage in various states to the volume in the natural state is called the loosening system of soil.

One side of soil is about a ton.

For the unit of measurement of the land.

It is a square, and one square of soil is equal to one cubic meter. Volume and weight are not equal, to be the volume unit.

Conversion with mass units, the main thing to look at is the mass of the object, which is the density. Therefore, to calculate the weight of the soil, it is necessary to distinguish the density of the soil. The density of the soil is related to the chemical and mineral composition of the soil.

Density of general soil = , Soil density with high organic matter content is lower. Cohesive soil density =; Sand density =; Humus density =.

So according to the formula: mass is equal to the product of volume and density (m = v), according to the density of the general soil, one square of soil is about a ton.

The calculation of the quantity of earthwork isEngineering constructionan important step.

In the engineering design stage, the amount of earth and rock must be budgeted, which is directly related to the cost estimation of the project and the selection of the scheme. In reality, some engineering projects are calculated by earthtakes.

Disputes over the accuracy of the situation are also relatively common.

How to use the topographic data measured by the survey unit on the spot or the original digital terrain data, quickly and accurately calculate the amount of earthwork has become an increasingly concerned problem, and the more commonly used earthwork calculation methods are: grid method, section method, DTM method, and average elevation method (scatter method), contour method, etc.

The weight of one cubic meter of soil is about equal to tons to tons. However, this data can only be used as a reference, because the density of the soil is also different, and there are some differences in the calculated weight, so it cannot be generalized.

The weight of the soil also has a lot to do with the composition of chemical minerals, and we mainly have to combine the density of the soil to calculate.

If you want to measure the density of the soil, you also need to measure it in a formal way, and you need to take multiple measurements when measuring, and then take the average value. In general, the density of the soil is in the arrival.

The influencing factor of the weight of the soil (one of them) - water content:

The weight of the soil is also related to the moisture content of the soil, and the weight of the soil with a relatively high water content will be slightly higher. The lightest weight should be sand, the water content of sand is very small, so the weight of a cubic of soil is about 2 tons.

Soil is still relatively common in daily life, and it is also used in construction projects, and concrete is made of soil, cement and other materials.

The above content reference: Encyclopedia - soil.

1 cubic meter of soil is equal to about a ton.

First of all, it is necessary to understand the unit, and the volume unit generally refers to the cubic meter. Cube is often used to measure the volume of an object, such as cubic meters, cubic decimeters, cubic centimeters.

The ton is a unit of mass, which is mostly used to measure the weight of larger items in life. One metric ton is equal to 1000 kilograms. The unit of measurement for land is square, and one square of soil is equal to one cubic meter.

Volume and weight are not equal, to convert the volume unit and the mass unit, the main thing to look at is the mass of the object, that is, the density.

Therefore, to calculate the weight of the soil, it is necessary to distinguish the density of the soil. The density of the soil is related to the chemical and mineral composition of the soil. Density of general soil = , Soil density with high organic matter content is lower. Cohesive soil density = ; Sand density =; Humus density =.

According to the formula: mass is equal to the product of volume and density (m=v), and one square of soil is about tons according to the density of general soil.

About tons per cubic meter. The volume of ordinary loess is about more than tons per cubic meter after tamping (see the density value). The density of dry soil (untamped, generally greening soil) should be less than ton.

General cohesive soil =, sandy soil =, humus soil =, this is the natural density. In addition, the moisture content of the soil is the main factor to be considered.

Soil:

Soil refers to a layer of loose material on the earth's surface, composed of various granular minerals, organic matter, water, air, microorganisms, etc., which can grow plants. Soil is composed of minerals weathered from rocks, organic matter produced by the decomposition of animal and plant and microbial residues, soil organisms (solid substances), water (liquid phase substances), air (gas phase substances), and oxidized humus.

Good evening, dear.

One cubic of earth is equal to a ton. The cubic is a unit of volume, the ton is a unit of mass, the units of the two are different, and they need to be calculated by density, taking the density of soil as an example per cubic centimeter, the volume is 1 cubic meter, and the formula for calculating the mass is: mass = density multiplied by volume.

According to the formula, 1 cubic meter is equal to 1,000,000 cubic centimeters; 1000000 cubic centimeters per cubic centimeter = 2800000g = tons, so one cubic of earth is equal to tons. It is important to note that:

Calculating how many tons of soil is equal to one cubic meter of soil needs to be calculated according to the density of the soil, and the density of the soil is related to the chemicals and minerals in the soil.

Questions. 40 tonnes is equal to less ton.

How many squares. Hold on.

40 cubic meters. 1 cubic meter is equal to 1,000 cubic decimeters, so 40 cubic meters is equal to 40,000 cubic decimeters.

tons or so.

The density of the soil is different, and the weight is different. When the density of the soil is g cm3, the weight of 1 cubic meter of soil is about tons, and the weight of 1 cubic meter of saturated clay is about tons. To claim the weight of the soil, it is calculated according to the product of the soil density, mass equal to volume and density (m = p v).

Cohesive soil refers to the soil with more clay particles and less permeability. It has good water stability, high strength and capillary action after compaction.

Big. Its particles are fine, the pores are small and many, the water permeability is weak, it has the characteristics of expansion and contraction, and the mechanical properties follow the water content.

size and variety.

How much does a cubic of soil weigh:

1. After compaction, the ordinary loess exceeds tons per cubic meter (see the density value). The density of dry soil (not compacted, generally used for greening) should be less than tons.

2. Generally speaking, cohesive soil p= , sandy soil p = and humus soil p = are natural densities.

3. Natural compacted dry soil, the proportion of three types of soil is about 1 cubic meter and 2 tons, and the proportion of four types of soil is slightly larger.

One side of soil is about a ton.

According to the formula: mass is equal to the product of volume and density (m= v).

1. Volume. One side is equal to 1 cubic meter.

Second, density. The density of the soil is related to the chemical and mineral composition of the soil.

General cohesive soil density:

Sand density =;

Humus density =.

Generally, the density of soil is taken, and the weight of one cubic soil is x = tons. 10,000 cubic meters = 10,000 cubic meters.

10,000* tons. So, 10,000 square meters of soil is equal to 26,000 tons. Hail.