Is it difficult to learn the third order Rubik s Cube blind twisting? Blind twisting of the third or

If you are new to the game, it is recommended not to learn blind twisting. To practice blind twisting, it is not just a formula that can be successfully restored. In order to practice blind twisting, in addition to a certain amount of formulas, you also need to have a deep understanding of the Rubik's Cube, you need to be able to flexibly transform the formula, and you also need to have a good short-term memory.

Ability and spatial thinking skills.

Blind twisting principle: take the third-order Rubik's Cube as an example, the third-order Rubik's Cube is composed of twenty-six pieces, including six central blocks, eight corner blocks, twelve edge blocks, the center block is relatively fixed, in the process of our memory and restoration shed, as long as one of the colors is always under the bottom, a certain color is on the right, the memory and restoration process does not have to care about the six center blocks.

Each of the other twenty blocks has a problem with position and orientation, and as long as these two problems are solved, the Rubik's Cube will be restored.

There are three colors of corner blocks, which means that there are three directions: correct, clockwise, and counterclockwise. There are only two colors of edges, so there are only two directions: right and wrong.

The position is very intuitive, the corner block can only swap positions with the corner block, and the edge block can only swap positions with the edge block.

Through a set of fixed coding methods, the current state of these twenty blocks is encoded, and the memory is realized, and then the entire Rubik's Cube can be gradually restored blindfolded using formulas.

Blind twisting, a Chinese word, means that the player first observes the state of the Rubik's Cube and memorizes it, and then blindfolds it with an eye patch and quickly restores the Rubik's Cube. There are also many ways to blind twist, such as: four-step method, two-step method, three-step method, etc.

Hello, it's a pleasure to answer the 3rd Order Rubik's Cube blind twisting tutorial for you: First, you need to prepare a 3rd Order Rubik's Cube and an eye patch or other items to cover your eyes. Here are the steps to blindly twist the third-order Rubik's Cube:

Attach the blindfold to make sure you can't see the Rubik's Cube. Scramble the Rubik's Cube, which can be done using any method such as rotating the Rubik's Cube at will. Place the Rubik's Cube on your table and pick up the Rubik's Cube directly in front of it.

Start looking for an edge block, which is a block made of two colors. On the edge block, you just have to remember one of the colors and position it in your memory. Then turn the block to the upper center of the Rubik's Cube directly below it.

Flip the Rubik's Cube to a position that allows you to see the bottom plane. Look for the corresponding bottom edge block, which is the same color as you remembered in step 4. Turn this block directly below the center block you positioned in step 4.

Now you need the squire to remember the next edge block, which will be the same color as you ignored in the fourth step. Turn the block directly below the center block of the upper layer. Flip the Rubik's Cube to a position that allows you to see the bottom plane.

Look for the corresponding bottom edge block, which is the same color as you remembered in step 7. Turn this block directly below the center block you positioned in step seven. Repeat steps 4 through 9 until you have reassembled the entire Rubik's Cube.

It's important to note that this method requires exercising your memory and hand coordination. It can be difficult at first, but with practice, you can become more and more proficient. Hope it helps!

The blind twisting method of the third-order Rubik's Cube is divided into the memory stage and the problem solving stage. In the memory stage, you need to remember the color distribution on the Rubik's Cube; In the problem-solving stage, it is necessary to reverse the problem solving scheme according to the memorized content and complete the blind twisting. The following is a simple tutorial for the blind twisting of the third-order Rubik's Cube:

1.Memory Stage (1) Observation of the Rubik's Cube: Gently rotate the Rubik's Cube to observe the color and position of each face.

2) Memorize the Rubik's Cube: By observing, try to remember the color distribution of each side of the blind chakra. You can use techniques and memorization, such as judging a single layer, finding out the ownership of corner blocks and edge blocks, etc., so as to quickly remember the color distribution of the Rubik's cube.

3) Write down the order of problem solving: According to the color distribution of the Rubik's cube, reverse the order of problem solving, write down the solution method and operation of each step, and form a blind twisting scheme. 2.

Problem solving stage (1) according to the blind screwing scheme, follow the steps. (2) Preliminarily assemble a layer, rotate according to the blind twisting scheme, and put the four squares of the same color into a plane. (3) Carry out the splicing of the second layer, and carry out the second rotation operation on the blind screwing scheme.

4) Solve the color assembly of the top layer and complete the blind twisting of the Rubik's Cube. It should be noted that blind twisting is a very difficult and technical Rubik's Cube gameplay, which requires more time and energy to practice and master, it is recommended that beginners carry out step-by-step training and practice, and conduct more simulation and actual combat exercises, so as to lay a good foundation in order to gradually deepen.

The easiest way to blindly twist the second-order Rubik's Cube is as follows:

In order to achieve blind twisting, the first question is to memorize the numbers of the states of each small square that make up the Rubik's Cube, and first to specify the method of numbering. We can define a top surface and a bottom surface according to our favorite color. Generally, according to the traditional practice, yellow is the top, white is the bottom, and then the 8 corner blocks are numbered accordingly.

Step 1

First, find the one with the most color alignment in a certain face, and take it as the top. Upper Left Front (ULF) 1, Upper Left Rear (ULB) 2, Upper Right Rear (ULB) 3, Upper Right Front (URF) 4, Lower Left Front (DLF), 5 Lower Left Rear (DLB), 6 Lower Right Rear (DRB), 7 Lower Right Front (DRF) 8

Assuming that this 3 is correct, there is no need to move. Then use the number 1 as a buffer block to continuously restore the Rubik's Cube. There are a total of 8 corner blocks in the second order of the Rubik's Cube, and our first step is to make the color blocks face in one direction, that is, the top and bottom sides are white or yellow.

Therefore, it is necessary to restore the direction of up to 6 corner blocks, and the direction of the top and bottom color blocks of this Rubik's Cube is restored.

Step 2

adjust the direction of the color block; We need to adjust the top and bottom sides of the Rubik's Cube to red and orange. It's not that one side is full color, it's that one side can only be red + orange. This ensures that the direction of the top surface of the Rubik's Cube and the bottom surface of the Rubik's Cube is the same.

In the third step, adjust the position of the color block.

The second step is relatively simple, just memorize 6 numbers. We need to understand that the color block has a direction, and the direction can be adjusted by rotating the color block in a counterclockwise or clockwise direction through a formula. No. 1 is still a processing buffer, while No. 3 is already good.

With the formula below, you can adjust the 2nd position counterclockwise or clockwise.

Equation 1 and Equation 2 are mirror images, so it's enough to memorize them. Doing Equation 1 twice is the effect of Equation 2. You need to memorize up to 2, 4, 5, 6, 7, 8 and whether the six numbers are straight or backward.

We can use 0 for immobility, 9 for reverse, and 1 for straight. Adjust the order of color blocks 2, 4, 5, 6, 7.

What needs to be focused on here is the adjustment of color block 4 and color block 4, and the top layer cannot be directly selected. You need to select the right side first, so that the color block 4 to 7 position, and then rotate the back, so that the color block 4 to 2 position. After the adjustment is over, go back in reverse order.