What motherboard is better with E3 1230 V3?

Since it is not overclocked, it is enough to choose the B85 motherboard, and the comparison chart of these three chips is attached below:

As you can see from the above figure, the h81 vetoed it at the first time, because it may be on a more powerful graphics card, and the bandwidth may not be enough.

MSI B85-G41 PC Mate 549Ԫ.

Of course, you can also choose the stronger H87, it has a solid-state acceleration function, but the above ** is not written, if it is on the SSD, it is worth choosing:

MSI (MSI) ZH87-G43 669 yuan.

It is more suitable with B85, which can bring out the performance of the processor and is the most cost-effective.

B85 motherboard parameters:

Main chipset: Intel B85;

Audio chip: Integrated Realtek ALC1150 8-channel audio chip;

Memory slots: 4 DDR3 DIMM;

Maximum memory capacity: 32GB;

Motherboard form factor: ATX form factor;

Dimensions: ;

Power socket: one 8-pin, one 24-pin power connector;

Power supply mode: 8 phases.

The motherboard of the B85 is the best because of the E3

1230v3 can't be overclocked, it's a waste to use Z87, but H81 is too low-end, so B85 motherboard is recommended.

B85 From the choice of Tualatin bar buddies.

The E3-1231 V3 requires a motherboard with a B85 chipset.

Intel Xeon E3-1231 V3 is mainly aimed at the entry-level small server market, but it uses the Haswell-R architecture and the interface is LGA 1150, which is no different from the desktop Haswell-R processors on the market. The main frequency of the E3-1231 V3 is the maximum turbo frequency, and the four-core and eight-thread specifications are a notch higher than that of the Core i5.

Since the E3-1231 V3 is a CPU without cores, it must be equipped with a discrete graphics card, and the other is that the CPU cannot be overclocked, so the best match is the B85 chipset, if it is paired with the Z series chipset motherboard that can be overclocked, it can also be used, but the motherboard overclocking function is relatively wasted.

E3-1231 v3 performance level

E3-1231 V3 is almost above 7W5 from the running score, overall at the mid-range processor level, the current 9100F running score is basically around 6W, but in terms of parameters, the 9100F main frequency is higher than that of E3 1231 V3, but the eight threads of E3 above the ** process are a full more 9100F four threads, especially in multitasking, the advantage is obvious, in some single-core performance applications and games and production processes9100F has an advantage. As a result, the overall performance of the E3 1231V3 is on par with the 4th generation i7, 6th generation, 7th generation i5, and 8th generation 9th generation i3.

Xeon E3 1230V5 is a new sixth-generation product launched by Intel last year, using the most advanced 14nm process, a new LGA 1151 interface type, supporting DDR3L 1600 and DDR4 2133 memory, and needs to be paired with a new service-level C200 chipset motherboard.

At present, the new motherboard models of the C200 series mainly include C236 and C232, of which C236 is equivalent to the Z170 motherboard, which supports server-specific ECC memory, but does not support overclocking, so to a certain extent, we can regard the C236 motherboard as the Z170 that cannot be overclocked. The C232 is equivalent to the B150 motherboard, but this chip motherboard does not support the core graphics card.

What motherboard is best for Xeon E3 1230V5? You may wish to learn from the experience of the six generations of processors, choose the C236 chip motherboard for the slightly high-end configuration, and choose the C232 motherboard for relatively low specifications, of course, you can learn from the Z170 and B150 models to match.