How do I check the IP address that my router automatically assigns to my computer?

Updated on technology 2024-03-23
4 answers
  1. Anonymous users2024-02-07

    I don't really understand what you mean, you mean that your dormitory has a fixed IP for each network cable, and you want to connect to a wireless router, and then the router assigns this IP to the computer,?

    First of all, if the frontend is a router, then the secondary route cannot be on the same gateway (network segment) as the front-level route, otherwise the two will conflict. For example, if the IP address of the pre-route management is the CIDR block, and the secondary route must be the CIDR block, the two routes cannot work on the same CIDR block when DHCP is enabled.

    Secondly, if it is a fixed IP to surf the Internet, then your router must be set to the assigned static IP, so that the pre-route can allow you to connect to the Internet, and the secondary route must be other network segments, this multiple devices can be connected to the wifi Internet, but it cannot achieve the purpose of assigning this IP to your computer.

    If it is not a fixed IP, you can turn off the DHCP mode of the router, or plug the main line into any LAN port of the router when the switch is used, and you can also connect multiple devices to the Internet, and you can bind the MAC static IP on the router. Or the computer network connection is manually IP to.

  2. Anonymous users2024-02-06

    Start Menu - Run -cmd - Enter - ipconfig - Enter.

  3. Anonymous users2024-02-05

    People who have mobile phones can't do without the network, and when we connect to the network, we can use the network to do what we want, but few people know how the IP address of the router is assigned. Here I will introduce to you how the IP address of the router is assigned.

    A computer connected to the router.

    One way for routers to assign IP addresses is to enable the DHCP service, which allocates the computer's static IP address, subnet mask, default gateway, and DNS parameters according to the needs of the system.

    After DHCP assigns the IP address, you need to start the computer and router from scratch, so that the computer will run normally and have a normal network**.

    Another way for routers to assign IP addresses is to automatically assign IP addresses when the DHCP service is not enabled. Here, you can query your static IP address, subnet mask, default gateway, DNS and other parameters on the computer according to the cmd command.

    Here are two ways to assign IP addresses to routers, when we use the network, we should not only use, but also understand how it serves us, so that when it goes wrong, we can find the error accurately and solve the problem quickly. Hope it helps you here!

  4. Anonymous users2024-02-04

    A protocol for interconnection between networks.

    That is, a protocol designed for computer networks to communicate with each other. In the Internet, it is a set of rules that enable all computer networks connected to the network to communicate with each other, and stipulate the rules that computers should follow when communicating on the Internet. The following is the IP address of the router that I have collected and sorted out to view the machine, welcome to read.

    Method: Click "Start" on the computer - Run - Enter cmd to OK - Enter "ipconfig all" in the pop-up command window. As shown in the figure below, the IP address column is the LAN IP address of the machine.

    default gateway is the default gateway.

    The IP address of the router to which you are currently connected.

    How to check the IP address of the computer that the router is connected to.

    How to check the IP address of the computer connected to the routerAfter logging in to the router - find the "DHCP server."

    Client list – The assigned IP address is the LAN IP address of the computer to which you are connecting.

Related questions
How to set the router to allocate broadband to 50
11 answers2024-03-23

Is your wireless encrypted?

It's very likely that someone will rub the net. >>>More

The computer and router are always automatically disconnected!
14 answers2024-03-23

First of all, you need to confirm that the system is not infected with viruses, Trojans, or malicious programs, and secondly, on the premise that other parts of the system are running normally >>>More

The use of routers to routers, how to use routers as converters
10 answers2024-03-23

I don't know what you mean by the network cable is the landlord's? It's really hard for you. >>>More

How to set the router to automatically disconnect the Internet when the router cancels automatic Int
25 answers2024-03-23

You have restored the factory settings of the router, of course, you can't access the Internet, because the information in the router is also erased when you restore it. If you use win's built-in dial-up or Internet starry sky to surf the Internet, you can't connect to the router, directly to the cat. >>>More

How can a computer be connected to the Internet without a router?
21 answers2024-03-23

To connect to broadband, you need to dial up first, and then connect to a broadband server before you can access the Internet. The reason why you can use the router to turn on the Internet is that you have already filled in the broadband account and password into the router, and as long as the router is powered on, it will automatically dial up the Internet. Therefore, the access settings under the router can be turned on to access the Internet. >>>More