What s going on with the abnormal sound of Wuling Rongguang car?

There are several reasons that may cause abnormal sound in the direction of the strike.

1. A certain ball head that is loose on the steering lever is open.

Second, the direction machine card issuance.

Third, the cross joint of the steering transmission shaft is loose.

Fourth, the steering wheel or steering shaft dust cover needs to be buttered (this is not a problem) The three-pack period of these things seems to be 2 years or 40,000 kilometers (see the three-pack policy of the maintenance and repair manual for details). It is recommended to go to the 4S store immediately for inspection. During the three-pack period, let them give you a free change.

They will also be very willing to change (you can get money from the manufacturer).

In fact, I want to know, what is the result of your steering wheel to better answer, is it a rack and pinion fan, or a double circulation ball, or hydraulic coupling? Or electric, it is likely that the gear is delayed, or the bearing is damaged.

Look at the steering machine, it is likely that there is a lack of oil, the gear is stuck, add some butter and try!

This abnormal noise is too one-sided, and the fault symptoms are not obvious and cannot be judged.

Summary. Wuling Rongguang stepped on the clutch and creaked, and when he released it, it didn't ring, what happened? There are three main types of internal noise in the transmission:

First, the bearing is damaged, and after stepping on the clutch, it will also exist, but after cutting off the power, there is no load, and the sound will become smaller; The second is tooth surface pitting, which is the same way, because there is no load, after cutting off the power, the speed of one shaft will be reduced, and the sound will gradually decrease; The third is the scratching of the gear sleeve and the joint tooth, due to the wear and tear of the shift fork in the process of use, after a certain amount, the position of the gear sleeve will not be in the center, there is a possibility of scratching, and the sound will gradually decrease after the clutch is stepped on. If you can be sure that it is the sound of the engine, and not the other parts are loose, you can look at this, it is very helpful, if it is the engine, it should be very regular, such as a certain speed, then every time it reaches this speed, it will appear, otherwise it is definitely not the sound of the engine, if it comes and goes, it is best to find other reasons.

Wuling Rongguang has an abnormal sound when driving, and it doesn't sound when you step on the clutch.

Wuling Rongguang stepped on the clutch and creaked, and when he released it, it didn't ring, what happened? There are three main kinds of sound inside the transmission: first, the bearing is damaged, and after stepping on the clutch, it will also exist, but after cutting off the power, there is no load, and the sound will become smaller; The second is tooth surface pitting, which is the same way, because there is no load, after cutting off the power, the speed of one shaft will be reduced, and the sound will gradually decrease; The third is the scratching of the gear sleeve and the joint tooth, due to the wear and tear of the shift fork in the process of use, after a certain amount, the position of the gear sleeve will not be in the center, there is a possibility of scratching, and the sound will gradually decrease after the clutch is stepped on.

If you can be sure that it is the sound of the engine, and not the other parts are loose, you can look at this, it is very helpful, if it is the engine, it should be very regular, such as a certain speed, then every time it reaches this speed, it will appear, otherwise it is definitely not the sound of the engine, if it comes and goes, it is best to find other reasons.

Hello, because seeing that you did not rate me last time, I am very concerned about your experience. If you are satisfied with my service, I hope you can give a thumbs up! If there is a problem, I am always waiting for you. I wish you a happy life and a happy life!

Before analyzing the abnormal noise, one thing should be clear, that is, to confirm the ** of the abnormal noise. Otherwise, if you dismantle and repair, there will be no abnormal noise. Therefore, it is important to confirm the abnormal noise**.

The following are the locations and causes of abnormal noises when turning the steering wheel

1. The sound of the turn signal returning.

If the turn signal is turned on at the same time as the steering, then the sound may be the sound of the rebound clip of the turn signal automatic return mechanism, which needs to be confirmed by the car owner, if so, then this is a normal situation. Sometimes you will hear more than once, at that time, because of the amplitude of your rotation of the steering wheel, the directional column has three automatic return positions in one circle, and if you turn the steering wheel once, then it will sound three times.

2. The abnormal sound emitted by the dust jacket of the direction column.

If the noise is coming from under the steering wheel, it may be an abnormal noise from the dust jacket of the steering column. Due to the lack of lubrication of the steering post boot, there will be a friction sound. In this case, the owner only needs to apply some butter to the dust jacket, and the abnormal noise will disappear.

3. Abnormal noise coming from the steering wheel.

If the abnormal sound comes from the steering wheel, then the problem is likely to be caused by the airbag hairspring in the steering wheel, remove the steering wheel airbag hairspring and apply some butter to see if it still sounds, if it still rings, replace the airbag hairspring, because the airbag hairspring is damaged. Be careful to remove the steering wheel gently, or unplug the airbag fuse to avoid the airbag from deploying.

Turn the steering wheel to hear the sound is made from outside the car, this may be the sound of the plane bearing of the shock absorber is short of oil, you just need to open the cover to listen to whether the sound is from the position of the top seat of the shock absorber, so that you know whether it is the sound of the plane bearing of the shock absorber, the plane bearing of the shock absorber sounds, you can apply some butter on the plane bearing, if it still rings after coating, it can only be replaced.

Generally, there are many reasons for this situation, such as the sound of the turn signal returning, which is normal, or it may be the abnormal sound of the steering column dust jacket, the friction between the plastics, the abnormal noise from the steering wheel, the abnormal sound from the plane bearing of the shock absorber or the abnormal sound from the balance bar.

The gurgling sound may be caused by one of the following problems and needs to be checked.

1. The plane bearing of the shock absorber makes an abnormal sound.

2. The abnormal sound emitted by the balance bar.

3. The abnormal sound emitted by the dust jacket of the direction post.

4. Abnormal noise coming from the steering wheel. The above 4 are all different reasons and need to be investigated one by one.

If it is recommended, go to the store to give you a free inspection, all within the warranty period, and it's nothing, just take a moment to ask a question 1

If the plane bearing of the shock absorber makes an abnormal sound, if it is a gurgling sound made by shaking the steering wheel in situ, then it is likely to be the sound of the plane bearing of the shock absorber due to the lack of oil, you just need to open the head cover to listen to whether the sound is from the position of the top seat of the shock absorber, so that you can know whether it is the sound of the plane bearing of the shock absorber, the plane bearing of the shock absorber sounds, you can apply some butter on the plane bearing, if it still rings after coating, it can only be replaced.

First, if it is a sound in the car.

1. The sound of rebounding the clip after the turn signal.

If the steering wheel will have this sound after hitting the steering switch, it is the sound of the rebound clip of the turn signal automatic return mechanism, and this sound is normal. If you hit the steering wheel, there will be a pimple, and the steering wheel will turn around and it will appear three pimple sounds, because the steering column has three automatic return card positions in a circle, so this sound will appear. As soon as you turn off the turn signal, the sound will disappear.

2.The sound of the direction post dust jacket.

Whether you are in place or driving as long as you hit the steering wheel, you will hear the sound coming from under the steering wheel, you should check the steering post dust jacket, once the steering post dust jacket lacks lubrication, it will produce a dry friction sound, you just need to apply some butter in the dust jacket This sound will disappear.

3.The sound emitted by the interference of the airbag hairspring.

When playing the direction, the sound is emitted from the steering wheel, most of this problem is caused by the interference of the airbag hairspring in the steering wheel, remove the steering wheel airbag hairspring and apply some butter to see if it still sounds, if it still rings, replace the airbag hairspring, because the airbag hairspring is damaged.

Second, if it is a sound outside the car.

1.The sound of the flat bearing of the shock absorber.

Hit the steering wheel to hear the sound is made from many outside the car, this may be the sound of the plane bearing of the shock absorber is short of oil, you just need to open the front cover to listen to whether the sound is from the position of the shock absorber top seat, so that you know whether it is the sound of the plane bearing of the shock absorber, the plane bearing of the shock absorber sounds, you can apply some butter on the plane bearing, if it is still loud after coating, it can only be replaced.

2.The sound of the glue loosening of the balance bar.

The sound is not emitted from the plane bearing of the shock absorber, it is necessary to check whether the balance bar rubber is loose or damaged, the balance bar rubber is loose and damaged, not only will it sound when playing in the direction, but also make a sound when crossing uneven roads, and the loosening of the balance bar rubber can be solved by adding a gasket, and if it is damaged, it can only be replaced.

There is a certain relationship between the abnormal sound of the steering wheel and the change of temperature, and it may be that the steering column is faulty, the plastic will become hard after the temperature drops, and there will be abnormal noise when the steering wheel is played, and there will be friction when the gap is small when turning, and the run-in can be returned to normal after a period of time, depending on the situation. If the abnormal sound of the steering wheel is a normal phenomenon in winter, because the plastic parts on the steering wheel produce friction, resulting in the gap of the car when rotating, this fault does not need to be dealt with, and the normal use can be resumed by waiting for the weather to warm up, if it is abnormal noise during the run-in period, it is normal to resume normal use after the run-in period, and if there is abnormal noise after the run-in period, the steering wheel needs to be reinstalled.

The most likely reason for the squeak analysis is the following: if there is a problem with the steering wheel steering mechanism, there may be a lack of oil, or there may be a large gap, or there may be a problem with the steering mechanism of the tire, it is recommended to go to a regular store for inspection.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts.

Question: Is it a bit crooked that the new car has only appeared for more than half a year?

It's been a month before the question.,Replace the right lever without warranty.,How much is the original Skoda Komic direction machine.。

Question Okay, thank you.

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

The abnormal sound of the car hitting the steering wheel may be due to a problem with the steering mechanism of the steering wheel, it may be a lack of oil, it may be too large a gap, or it may be a problem with the steering mechanism of the tire.

Hello, happy to answer your questions.

If there is a slight sound in the direction of the car, it is necessary to check the steering column cross shaft under the steering wheel to see if there is a loose gap, and it is necessary to check the note in the steering machine to see if there is any wear, and it is necessary to check the ball head of the steering machine to see if there is a problem.

Q: Do I need to change the steering machine? What should I do if it still rings after I change it?

Ask a question! Thank you.

There is a rattling sound in the direction of the car, and I think it is possible that the steering wheel is malfunctioning, or because your tire is pressing on something, or it is also possible that this phenomenon will occur.