What is the design weight of an 80 meter mast 5

The design weight of the 80-meter mast is recommended to consult professional manufacturers, and it is recommended to choose Eternal Communications, the company is a group enterprise integrating R&D, design, production and installation of various types of iron towers, and the product processing adopts automated production lines, which are carried out under the control of strict program documents and work instructions.

A mast is a towering tower structure used to measure wind energy parameters, that is, a tower-shaped structure used to observe and record the movement of air currents near the ground. In the past, it was mostly built by wind power generation enterprises, meteorological and environmental protection departments for meteorological observation and atmospheric environment monitoring.

The main functions of the mast are: environmental monitoring, wind, air pressure, humidity and other resource data collection. Support for the installation of corresponding instruments and equipment.

Applicable units: power plant pre-planning, island wind measurement, meteorological data collection, environmental monitoring and other departments.

Advantages: small wind load coefficient and strong wind resistance. The small windshield area of the tower body is conducive to the accurate and objective collection of data, and the gap between the measured data and the actual data is reduced. [Click to get preferential policies].

If you want to know more about masts, we recommend Eternal Communication. In order to ensure the accuracy of the technical drawings for processing input, Eternal Communications will first check the technical conditions and processing requirements provided by the user in order to ensure the accuracy of the technical drawings entered by the processing. The microcomputer is connected to the terminal of CNC equipment such as cutting and bending to ensure the reliability and accuracy of the processed products.

Establish a firm and sober quality concept, pay attention to every detail in the product quality chain, strictly require all products to meet the standards, and strive to reduce defects and deficiencies to zero.

You have to look at what area is installed in the south, the south is generally heavier, the north is lighter, the south freezing rain is more severe, especially in the mountains, generally about 3 tons, there are more than 5 tons or larger, generally the meteorological bureau is practical.

I only know that the weight range of wind power towers is about 120 tons for the 1500kw class and 150-180 tons for the 2000kw class.

The 90-meter wind power tower generally weighs more than 200 tons.

The wind power tower is the tower pole of wind power generation, in the wind turbine.

It mainly plays a supporting role and absorbs the vibration of the unit at the same time.

The production process of wind power towers.

Generally, it is as follows: CNC cutting machine blanking, thick plate needs to be beveled, after the coil of the plate bending machine is formed, spot welding, positioning, welding of internal and external longitudinal seams after confirmation, roundness.

After the inspection, if there is a problem, make a second round.

After the welding of the single-section cylinder is completed, the hydraulic group is used to carry out spot welding on the roller frame, and the inner and outer annular seams are welded, and the straightness is welded.

After the tolerance check, after welding the flange, the weld non-destructive testing and flatness are carried out.

After inspection, sandblasting, painting treatment, internal parts installation and finished product inspection, transportation to the installation site.

Introduction to wind power generation.

Wind energy refers to the kinetic energy generated by the massive movement of air on the Earth's surface. Due to the different changes in air temperature and the different content of water vapor in the air after being irradiated by the sun, the air pressure varies in various places, and the high-pressure air flows to the low-pressure area in the horizontal direction, that is, the wind is formed.

Wind energy resources are determined by wind energy density and the annual cumulative hours of available wind energy. Wind energy density is the power of the wind, the cubic of the wind speed, and the density of the air that can be obtained from the windward area of a single bright position.

Proportional relationship.

Wind is one of the sources of energy that does not have to be harmed. And it's inexhaustible. For coastal islands, grasslands, pastoral areas, mountainous areas and plateau areas where water is scarce, fuel and transportation is inconvenient, the use of wind power generation according to local conditions is very suitable and promising.

China's wind energy resources are abundant, and the wind energy reserves that can be developed and utilized are about 1 billion kw, of which the wind energy reserves on land are about 100 million kw (calculated by the height of 10m above the ground on land), and the wind energy reserves that can be developed and utilized at sea are about 100 million kw, totaling 1 billion The installed capacity of wind power generation in the country reached 10,000 kw at the end of the year, and the installed capacity in 2013.

reached 91.41 million kW.

The mast is generally 80 meters high, and the height of the mast is determined after the site selection evaluation, and there are also meters of masts.

Mast|Mountain masts.

The weight of a 160-meter-high mast can be estimated to be around 1000-2000 tons, depending on the following factors:1Material:

Reinforced concrete towers are heavier than steel towers, and masts are usually made of steel structural materials, and the weight is 1000-1500 tons. 2.Structural form:

The tower body adopts a frame structure that is lighter, the grid structure and the solid structure are heavier, and the 160-meter-high Tongwei Wind Tower is generally a solid or semi-solid structure, weighing more than 1,500 tons. 3.Tower base size:

The weight of the tower comes mainly from the base of the tower, and the larger the foundation, the greater the weight. The 160-meter-high mast usually has a base diameter of 20-30 meters and weighs about 700-1,500 tons. 4.

Ancillary equipment: The equipment on the top of the tower and on each measuring platform is also part of the weight, including generators, working cabins, antenna devices, etc., weighing about 200-500 tons. 5.

Environmental factors: In bad weather areas, thicker steel plates and stronger structures are needed to resist the damage of the external environment, thus increasing the weight. Of course, the exact weight also needs to be calculated according to the design blueprint of the mast structure.

However, according to rough estimates, the weight of the 160-meter-high wind tower should reach thousands of tons, which also brings high requirements for its foundation and installation work.

Summary. How many tons is a 160-meter mast tower.

Hello dear, the following <> for your expansion

The role of the mast and the main functions of the mast are: environmental monitoring, data collection of wind, air pressure, humidity and other resources. Support the installation of the corresponding liquid dispersion instruments and equipment.

The mast is a kind of towering tower structure used to measure wind energy parameters, and Ashino is a tower-shaped buried structure used to observe and record the movement of air currents near the ground.

Hello dear<>

The answer you're looking for: the 160-metre mast weighs 150 200 tons. The offshore wind power tower weighs 400 450 tons, and the steel plate requires low level resistance and crack resistance.

When we talk about the question of "how many tons is a 160-meter mast tower", we may think that the mast is a very important tool for testing the feasibility of wind power generation. With the emphasis on renewable energy, wind power has become an increasingly popular energy option, and masts are one of the essential equipment for wind farms. The height of the mast is usually between 80 and 140 meters, and some wind farms have a mast height of more than 200 meters.

In addition to masts, there are other equipment that are essential for wind farms, such as wind turbines, substations, etc.

Summary. Specify a wind tower at an 80-ton site and estimate the weight of this tower. According to this estimated weight, assuming that the length of the wind tower is (bridge pants) meters, and the large head of the Minshu Jian wind tower is heavier than the attitude of the small head () tons, the position of the center of gravity of the wind tower is calculated.

Sorry I couldn't find any answers.

Good. Thank you.

You are welcome.

1. The equipment of the ordinary land mast (American NRG equipment) is about 150,000, excluding secondary handling.

2. The general cost of offshore masts is based on the drawings, three-column and four-column, in how deep the waters, the cost of offshore masts is relatively large. According to the drawings, it was reported.

3. The mast tower is aggravated in the south, and there will be freezing rain in the south in winter, which will cause the mast to collapse, so the weight is slightly more expensive than the ordinary type.