Do manual transmission cars release the clutch or gas pedal first?

You should lightly press the throttle to add some fuel before releasing the clutch.

The clutch controls the linkage between the car's power system and the wheels, stepping on the clutch means disconnecting the power, the engine will not stall, if you don't step on the clutch, the car will stop and stall.

When driving, the clutch is only used when shifting gears and parking, and brake and throttle control are used in other situations.

1. Clutch (separation device between automobile engine and gearbox) Clutch refers to the separation device between automobile engine and gearbox, also called clutch.

The clutch of an automatic transmission car is integrated into the gearbox to achieve automatic transmission.

Second, the clutch explanation.

The clutch is not a brake, if it is a purely automatic car, there is no clutch, only the brake and the accelerator.

The clutch should not be used as a brake, and if you press the clutch when going downhill, the car will go faster.

Because the clutch is disconnected from the wheels, the engine can no longer control the car, and the speed of the car will be faster under the action of inertia and gravity.

3. Throttle. The accelerator pedal, also known as the accelerator pedal, is a device that controls the fuel supply on the internal combustion engine.

The throttle is part of the vehicle's fuel supply system.

The throttle controls the throttle opening of the engine by controlling the amount of pedaling, controlling the intake volume, and the computer controls the oil volume, thereby controlling the speed of the engine.

Whether to step on the accelerator or release the clutch first when starting with manual gear, it hurts the car to remember the wrong order!

Release the oil first, then quickly press the clutch. If you release the throttle first and do not press the clutch, the engine will be braked directly due to the decrease in engine speed, which will reduce the speed of the vehicle. The first thing to do when changing gears in a car is to make sure that the engine has enough revolutions.

If you drive a lot, you can tell by your speed that it's time to accelerate and shift gears. In order to protect the engine, strictly speaking, the throttle must be released. Then quickly press the clutch and then shift gears while slowly releasing the clutch, quickly following the oil, and then releasing the clutch completely.

This process should be consistent and usually completed within three seconds. This also maintains engine continuity and the car does not trip.

Myth 1: Step on the clutch first, and then release the throttle. If you press the clutch first and do not release the throttle, the connection between the engine and the drive wheels is disconnected, the engine is not loaded, but the throttle is not released in time, which will cause the speed of the car to soar, or hear a burst of engine sound. If you are a passenger, you may find that the operation is not right and ask you if the car is broken.

Myth 2: Release the accelerator first, and then step on the clutch. If you release the throttle directly, the speed will drop briefly, and then press the clutch to change gears, and the car will have a more obvious frustration. There is a strong sense of frustration.

If the clutch is released too quickly, there will be a feeling of eating, which will bring an uncomfortable experience to the people in the car, and it is easy to cause motion sickness.

Depending on the driving conditions and economic speed of different models, the gears are shifted by adjusting the output of the engine. So the engine should be kept at a reasonable speed. Driving a car with a manual transmission is not a small challenge, so more and more young people are willing to spend more money to choose an automatic transmission when buying a car.

After all, it is very convenient to control, and this kind of problem often occurs on the road with a car with a manual transmission, and the engine will stall even when waiting for a red light. The whole person felt very embarrassed. phenomenon, causing a certain amount of damage.

When changing gears, you must be in place at one time, do not push and pull hard, which is easy to break the gears and easily lead to car accidents.

Pressing the clutch first without releasing the throttle will cause the clutch to disengage at high speed and cause the clutch plates to burn for a long time. Whether upshifting or downshifting, the normal procedure is: release the throttle, press the clutch, shift gears, and slowly lift the clutch while lightly supplying fuel.

You have to look ahead when driving. When you move your head, it can easily cause the car to go off course.

Therefore, it is necessary to familiarize yourself with the allocation position of the gears and adjust the seat position before shifting gears to make it more convenient and proficient to shift gears. Of course, there are cases where you need to refuel when changing gears. That is, the throttle cannot be released when shifting gears.

It's a steep slope. Some of the slopes are not very steep. I think the first gear is very expensive.

I want to shift into second gear. At this time, it is necessary to continue to refuel when changing gears, and the throttle cannot be released because the original climbing power is weak. If you completely release the throttle to shift, the engine will definitely not have enough power, and the car has a lot of power and may stall due to insufficient power.

While fuel is wasted when the throttle is not released, it ensures that the engine speed does not decrease, so you can continue to walk after shifting gears. Speed and gear must match. When the car reaches a certain speed, it can shift gears smoothly.

When driving, you don't know when it's time to change shifts. You can quickly check the tachometer according to the car's condition and shift gears directly after reaching a certain speed. In order to prolong the service life of the gearbox and reduce the impact of shifting, it is recommended to wait for the number of revolutions to stabilize before shifting, that is, you need to release the throttle!

Due to the presence of synchronizers in modern manual transmissions, there are no strict requirements for engine speed during gear shifting. However, after the clutch is pressed, the engine still presses the throttle, which will result in engine load loss, abnormal rpm increase and abnormal clutch plate wear! After starting in first gear, lightly press the throttle to increase the engine speed to more than 1300, release the throttle, step on the clutch, hang the second gear, and release the clutch.

The reason for sending the throttle is to ensure that the engine revs stable when shifting gears!

Of course, you should release the throttle first, and after releasing the throttle, the speed of the car will slowly slow down, and then you can step on the clutch.

You need to release the throttle before you change gears, and you don't need to release the clutch in the process, otherwise it will cause stalling.

I think you should release the throttle first, because pressing the clutch without releasing the throttle will cause the engine to rpm skyrocket.

Now the car driver's license has gradually become popular, many people, the student era has just ended with their own driver's license, the difficulty of obtaining a driver's license is not too high, as long as you study hard, you can get, in other words, it is very simple to learn to drive, but it is more difficult to drive a good car, in fact, there are many small details in the driving process, it takes a long time to practice to be proficient, let's talk about manual transmission cars, whether to release the accelerator when stepping on the clutch. <>

People who have driven a manual transmission car should be able to know that the grasp of the clutch is a difficult point in the manual transmission car, first of all, if your clutch has been stepped on to the end, you need to release the throttle at this time, because the clutch is equivalent to the neutral gear at this time, and now the throttle is equal to neutral, the throttle will not produce any power, and it will be easy to hurt the engine, especially when the 5th gear, suddenly step on the clutch to take off the gear, and at this time if you are still banging the throttle, Higher engine speeds are susceptible to injury. <>

Gear is also divided into upshift and downshift, the correct way to upshift should be to release the clutch while stepping on the throttle, especially in the low-speed gear, especially 123 gear, at this time when loosening the clutch should not be too fast, you need to loosen it slowly, and the throttle should not be too much, you need to step on it slowly.

In the downshift process, the speed of releasing the clutch can be slightly faster than that of upshifting, but at this time you can't step on the accelerator, because stepping on the accelerator at this time is equivalent to giving power to the car, and your purpose is to downshift and reduce the speed, and at this time, if you give the power and your idea is the opposite, so when you slowly release the clutch, the accelerator does not need to be stepped on, and when it descends to the gear and speed that you are satisfied with, then gently give the accelerator. <>

So to sum up, when driving a manual transmission car, stepping on the clutch can release the throttle, and it will not lead to stalling, but it is recommended to step on the clutch and loosen the throttle to reduce the speed when the speed is relatively slow, if the speed is fast, do not step on the clutch first at this time, but use the point brake to let the speed down first, and then press the clutch to the end, and the operating throttle at this time is completely released.

Do not release the throttle, as it will cause the engine to be unloaded, making noise and consuming fuel.

Yes, because if you don't release the throttle, you will damage the engine, because if the clutch is pressed to the end, it is equivalent to neutral.

When the manual transmission car steps on the clutch, it is necessary to release the accelerator, so that the car can start quickly and the speed can be increased.

If you put the accelerator first and the clutch is not stepped on, it will directly cause the engine to brake due to the decrease in engine speed, which will reduce the vehicle speed. When changing gears, the first thing is to ensure that the engine has enough revolutions. Generally 2000-3000 rpm before the best gear change.

If you drive often, you can judge whether it is time to accelerate and shift gears based on your speed, and in order to protect the engine, you must strictly release the throttle.

Then quickly step on the clutch to shift, while releasing the clutch slowly, quickly following the oil, and then fully loosening the clutch, the process should be coherent, generally completed in three seconds. In this way, the engine can also maintain continuity without stuttering. Taking a step back, if you release the throttle while stepping on the clutch, it is easy to cause the throttle foot to step down more and then you will hear the sound of oil booming, so it is generally necessary to release the throttle first and then step on the clutch, because stepping on the clutch throttle will have no effect on the car.

Riders concluded: "Manual transmission car shift operation skills. After the car starts, you need to step on the accelerator to speed up to 15km h, release the accelerator with your right foot, quickly press the clutch with your left foot to the end, and shift the gear to second gear with your right hand.

This completes the gear shift operation. It is not difficult to see from this complete shift operation that shifting gears requires first releasing the throttle and then pressing the clutch. Shifting gears is the principle, accelerating gears, increasing gears step by step, and not jumping gears.

Deceleration and downshifting, can jump gears. ”

It should be the first to loosen the clutch. While slowly lifting the clutch pedal, slowly press the throttle.

The clutch pedal can be lifted slightly faster than the throttle. When the body vibrates and has a tendency to move, first increase the speed of the accelerator pedal, and then speed up the lifting speed of the clutch pedal until the vehicle starts smoothly. Step on the accelerator first and pay for fuel.

Leave the world first and then throttle.

Due to the rough control of the throttle and clutch for novices, there will be certain safety hazards when the fuel is given first (the throttle is given too much and the clutch is loosened too quickly, the vehicle may move forward), so it is better to clutch first and then throttle.

If you can't reach the speed and change gears, the car will shake.

The first step is to release the throttle;

The second step is to step on the clutch;

The third step is to change gears;

The fourth step is to loosen the clutch;

The fifth step is to step on the accelerator.

Each step of this series of actions must be completed quickly.

2nd and 3rd gears ......Shift gears step by step.

Step on the clutch first, and then step on the accelerator when you enter gear. If you retreat, step on the clutch first, then step on the forklift, and then retreat.

Of course, you have to release the throttle first, and you have to slow down first.

Hello. The throttle should be sent first, if the clutch is pressed first. When you start the calendar, the speed will soar immediately.

It must be to step on the clutch first, otherwise the car will slow down, and there will be a sense of impact, but the oil collection must be fast, otherwise not only the engine will have to idle at high speed, but also consume more fuel.

That is to say, when you step on the clutch and feel that it has been disconnected, you should loosen the oil. If you are proficient, it is basically done at the same time, but the clutch should be quick and thorough.

Step on the clutch essentials, step on it sharply, and lift it slowly.

Support domestic production. It is to release the throttle first. Pressing the clutch first without loosening the throttle will cause the clutch to disengage at high rpm and burn out the clutch plate for a long time. The normal procedure regardless of the increase or decrease of gear is: release the throttle, step on the clutch, shift gears, slowly lift the clutch, and lightly fuel at the same time.

To start: Press the clutch pedal first, engage into gear, then add a little throttle and slowly lift the clutch pedal.

When the car changes gears, as long as the engine speed is not less than 2,000 rpm, it is fine.

Release the throttle before pressing the clutch.

In case of a situation, it is right to throw oil first, and then don't hesitate to brake, because your hesitant car has run out of 30 meters, don't step on the clutch brake, which may affect other stability, and run off the road. The heavier is the tail flicker. Brake, the car speed to the lowest, the car shivering and stalling the appearance of coming out, in the decisive clutch.

Do not loosen the brakes until you stop.