Huawei Honor 6xwifi cannot connect

If it is a problem after installing QQ Speed, it may be that QQ Speed and the mobile phone are incompatible, resulting in problems such as Caton, it is recommended to uninstall QQ Speed, and then use Mobile Manager to clean it up, it is recommended to use the Huawei AppGallery** software, the App Market will indicate even if it is incompatible.

If you still can't connect to wifi after the above operations, it is recommended to check whether other mobile phones have the same problem, if so, it may be that the WLAN password is wrong or there is a problem with the network, you can re-enter the password or use another network.

If the WLAN name contains Chinese or special characters, the mobile phone may not be connected, it is recommended to change the name to a simple combination of English and numbers on the router.

Only when DHCP dynamic address assignment is enabled can the router automatically obtain the IP address. Do not set the dynamic time of DHCP too short, preferably more than 2 hours.

If the network denies access, the hotspot may reach the maximum number of connections. Or it could be that the wireless router has the blacklist (MAC address filtering) feature turned on, and the phone is identified as a restricted access device. The router can be reconfigured and rebooted.

For details on how to set it up, see the router manual. After the configuration is complete, leave the original hotspot on your phone and try again.

Dear Kiss I am glad to answer for you: Why can't Huawei 6X connect to wifi6 Answer: Dear Kiss 1, please turn off and then turn on the WLAN switch to try to recover.

There is a temporary failure in the system that may cause the hotspot to not be searched. It is recommended to scan and try again if the router is close to a bend (3 5 meters), as the distance is too far and the hotspot cannot be found. 2. Please check whether the hotspot name contains Chinese or some other special characters, if it does, it may not be searched (display garbled characters), it is recommended to modify the hotspot name on the router, change it to a simple combination of English and numbers, and then try again to see if you can search for the hotspot again.

3. Please check whether the router is set to hide the SSID, the hotspot with the hidden SSID will not be scanned. After obtaining the wireless signal name, manually enter the wireless signal name and password connection in [Settings] - [Wireless LAN] - [Other Networks] on the mobile phone. 4. If the router is faulty, try to restart or restore the router to factory settings.

Router factory reset: You need to press and hold the factory reset button of the router, the button is on the router body, if you are not clear, you can check the product manual, and wait for the indicator light to turn on again. Then connect the router to enter the router management interface, and follow the setup wizard to reset the broadband connection network attempt.

5. If the connected WLAN has set a Chinese password, you need to open the settings, enter the secure input in the search bar at the top and click to turn off the secure input switch. 6. It is recommended to open the settings, enter the reset network settings in the search bar at the top, and click Reset network settings to try. Note:

If the problem persists, it may be a problem with your phone, so we recommend that you back up your data in advance and bring your purchase voucher to a Huawei customer service center near Tuanbo for testing. 7. If the router has set the maximum number of connections and reaches the upper limit, it may prompt the network to refuse access or the connection is unresponsive when connecting, and it is recommended to increase the maximum number of connections. 8. If the router adds MAC address filtering (blacklist) to the MAC address of the mobile phone, it will not be able to connect to the WLAN, and will prompt the network to refuse access, and you need to change the MAC address filtering settings to access normally.

The reasons why the Honor 6X can't connect to the wifi are:

1. The wifi itself is a problem, the wifi signal may be bad, resulting in the inability to access the Internet;

2. Router problems, the router may be overheated or damaged;

3. There may be broadband arrears, resulting in inability to access the Internet;

4. The wifi name contains Chinese, and some mobile phones cannot connect to the Internet;

5. There may be a problem with the system of the mobile phone, which may cause the system to be unable to connect to wifi.

1.It is recommended to change the password of the non-inclusive and bypass router, you can suggest that the user change the WiFi encryption method of the router to: WPA2-PSK, the password encryption method of some routers may not be compatible with mobile phones.

2.Build a reset static IP address of the mobile phone to try, go to Settings WLAN dot to block the wifi signal you want to connect to Then click the hidden input method in the upper right corner of the input box to display the advanced options on the check IP settings to select static Then according to the gateway address of the router, re-enter the IP address, gateway, network prefix length by default 24 (with the subnet mask), domain name 1 (the same as the gateway address) hole oak.

3.It is recommended to back up your data and restore it to factory settings. Go to Phone Settings - Backup & Reset - Factory Reset - Reset Phone - Erase Everything.

Change the WLAN settings below.

Go into the wifi list, bottom right corner - advanced, after entering.

1- Disable WLAN Optimization

2- Turn off Don't use a connection that is not in good condition

3- [Keep Wi-Fi connected in hibernation] Select Always.

Is the wifi restricted, try other wifi to see.