How to enter safe mode in notebook win10

Win10 into safe mode method:

1. Select [Start]-[Settings] in the lower left corner

2. Select [Update & Security].

3. After tapping [Restore], tap [Restart Now].

4. Reboot the computer to enter the Windows RE interface and click [Troubleshooting].

5. Click [Advanced Options].

6. Select [Startup Settings].

7. Select [Start].

8. Click on the safe mode environment to enter, and it is recommended to select (4) to enable the safe mode in the general state.

9. After selection, it will enter the safe mode.

1.Multiple ways to enter.

1) Method 1: Click the Start Menu button > All Apps > Computer Settings, switch to "Update & Restore", then switch to "Restore", and finally click the "Restart Now" button under "Advanced Startup".

2) Method 2: Press the Win+C key to open the Win10 charm, click "Device", then click the power button, and then click "Restart" after holding down the shift key to enter the boot menu.

2.After the computer restarts, it will enter the boot menu, select Troubleshooter > Advanced Options > Boot Settings, and press the "Restart" button.

3.Once your computer restarts, you'll see the option to enable Safe Mode. Also includes:

Enable options such as debugging, logging, low resolution**, Safe Mode with Networking, Safe Mode with Command Prompt, Disable Driver Enforcement, Pre-Activate Anti-Malware Protection, Disable Auto Restart After Failure, and press F10 to enter Recovery Mode.

System security mode is an artifact to solve system failures, if the user encounters a fault under the win10 system and does not know how to solve it, you can enter the security mode through the above methods, and all problems can be easily solved.

Windows 10 is an operating system developed by Microsoft Corporation in the United States for computers and tablets, and was released on July 29, 2015.

Open the Start menu and find Settings inside

Open the settings interface and find "Update & Security" inside

Open Update & Security, "Repair" on the left, and click on the "Restart Now" button in Advanced Startup.

The system automatically enters the security operation page and selects "Troubleshooting".

Go to the troubleshooter and select "Advanced Options".

Enter the advanced options, which have System Repair, Startup Repair, Command Prompt, Startup Settings, etc., and we select "Startup Settings".

Enter the startup settings interface and click the "Restart" button to restart the computer.

Entering the startup settings interface, there are 9 different options, we are to enter safe mode, press 4 or F4 on the keyboard

In this way, win10 will automatically enter safe mode.

win10How to enter the safe mode,After upgrading wi10, I found that it is useless to enter the safe mode when booting and press and hold F8,In fact, wi10 put the security mode into the system repair module,Let's introduce how to enter the safe mode of wi10。 --

Open the Start menu and find Settings inside

2Open the settings interface and find "Update & Security" inside

3Open Update & Security, "Repair" on the left side, and click the "Restart Now" button in Advanced Startup.

4. The system will automatically enter the security operation interface and select "Troubleshooting".

5 Go to the troubleshooter and select "Advanced Options".

6 Enter the advanced options, which have System Repair, Startup Repair, Command Prompt, Startup Settings, etc., and we select "Startup Settings".

7 Enter the boot settings interface, click the "Restart" button, restart the computer 8 Enter the boot settings interface, there are 9 different options, we are to enter the safe mode, press 4 or F4 on the keyboard

In the boot state, hold down shift and restart, and then enter safe mode after restarting.

1Open the Start menu and find Settings inside

2Open the settings interface and find "Update & Security" inside

3Open Update & Security, "Repair" on the left side, and click the "Restart Now" button in Advanced Startup.

4. The system will automatically enter the security operation interface and select "Troubleshooting".

5 Go to the troubleshooter and select "Advanced Options".

6 Enter the advanced options, which have System Repair, Startup Repair, Command Prompt, Startup Settings, etc., and we select "Startup Settings".

7 Enter the boot settings interface, click the "Restart" button, restart the computer 8 Enter the boot settings interface, there are 9 different options, we are to enter the safe mode, press 4 or F4 on the keyboard

9 So that win10 will automatically enter the safe mode.

1. Select [Start]-[Settings] in the lower left corner

2. Select [Update & Security].

3. After tapping [Restore], tap [Restart Now].

4. Reboot the computer to enter the Windows RE interface and click [Troubleshooting].

5. Click [Advanced Options].

6. Select [Startup Settings].

7. Select [Start].

8. Click on the safe mode environment to enter, and it is recommended to select (4) Enable safe mode 9, and enter the safe mode after selection.