Why does the electricity bill seem to be higher after changing to a new meter than before?

The main reasons why you feel that the new meter is going fast after changing the meter are: It coincides with the arrival of the peak electricity consumption in summer or winter, it is recommended that you check the electricity consumption in the same period in previous years, and the gap may not be as big as it feels. The addition of household appliances in the home and the addition of permanent residents in the household may lead to an increase in electricity consumption.

If you use a mechanical watch before changing your meter, it will slow down due to wear and tear over time, and the accuracy of the new meter may give you the illusion that the meter is going fast.

If you have any questions about your electricity bill, please call the 24-hour electricity supply service**95598 and the power supply department will arrange an account manager to verify it for you.

We hope you find ours helpful.

The main reason is that the old meter is mechanically billed, and the current is small and does not move at all. Now it's all electronic chips, and it's very precise. Even a tiny amount of power will go.

Remember to unplug appliances when not in use. In standby case, there is a lot of power. If you have any objections to the meter, you can apply for meter inspection.

Because the new meter will be more sensitive.

The new delegates walked relatively fast.

It is said that the meter goes fast, how to find out the meter is tired? The method is so simple that electricians are reluctant to teach you.

If you feel that there is a problem with the meter, you can apply for verification, at your own expense, and it is not expensive!

Compared with the old meter, the "smart meter" is more sensitive and can detect the current that the old meter cannot detect. The previous mechanical meter increases with the service life, in which the mechanical parts will be worn, resulting in the decrease in the sensitivity of the meter, and it is impossible to measure some weak currents consumed at home, while the smart meter uses electronic chips to measure, and the accuracy is generally not reduced due to the increase in service life, which makes many residents have the illusion that the power consumption at home rises after changing to a smart meter.

The old mechanical meter needs a certain starting current, in the past, like the plug is not pulled out, the TV standby, maybe the meter will not go to the word, but now the new meter is displayed by the number of pulses, and the standby plug of the home appliance will also be worded, so the user will feel that the electricity consumption has increased greatly.

After installing and using the smart meter, users can directly query the electricity consumption, balance, electricity consumption and other information through the LCD screen on the meter. Although the new meter may not seem to actively help save household electricity consumption on the surface, its real-time display function will help users notice these small details of electricity consumption, so that they can use electricity more rationally and develop good habits.

Through the remote information transmission function of the smart meter, the power staff can monitor the working status of the meter in real time, find the meter fault in time, and avoid losses to users.

Does the new watch consume more power than the old one? In fact, it is not, this is a misunderstanding that exists for everyone, in simple terms, the old meter measurement accuracy is low, the error is large, a lot of small electrical appliances basically do not go when using electricity, or go very slowly, now the new meter is basically an electronic meter, high sensitivity, like the previous situation that small electrical appliances do not go no longer exists, even the standby will go to the meter, such as the TV with remote control shutdown, although the standby power is generally 2 3W, but the meter is still normal measurement, so compared to the old meter, the new meter feels more power than the old meter, Its practical old watch himself unknowingly took advantage of the country and did not know. Now advocate conservation, if the electrical appliances are not used for a long time, it is best to turn off the power or unplug, one to save electricity, and the other is safer to use electricity.

Summary. Hello, as long as the meter measurement is accurate, the new meter goes "fast", the electricity consumption is more than the original, in fact, it is due to the limitations of the old meter by the process and material, long-term use of wear and dirt blockage, the new meter has higher sensitivity, accurate measurement, standby power consumption and other small amounts of electricity can be accurately measured, easy to cause the illusion that the new meter "goes fast".

Hello, as long as the meter measurement is accurate, the new meter goes "fast", the electricity consumption is more than the original dismantling, in fact, it is due to the limitations of the old meter by the process and material, long-term use of wear and dirt blockage, the new meter has higher sensitivity, accurate measurement, standby power consumption and other small power can be accurately measured, easy to cause the illusion of regretting the new meter "go fast".

Still dirt on electronic watches?

That's right, because fine dust will get into the table, and the accumulation will become dirt.

1. Because the original mechanical meter is worn out after long-term operation, it is easy to go slower than the standard accuracy, and the new meter is more sensitive and more accurate, which may cause the illusion of multiple meters to users. There are also many situations where it can feel like going fast. For example, when the new meter is replaced, it coincides with the peak period of electricity consumption, and the customer's electricity consumption itself increases, but he thinks that the electricity bill increases after the meter is replaced.

2. When the meter is in the period of two meter readings, there may be a settlement of half a meter reading cycle before the meter change, and a half meter reading cycle after the change, which is easy to make the customer feel that the electricity cost increases.

The electricity bill follows the price**, after the meter is replaced, we used to be more than 200 yuan a month, and now it costs 300 yuan a month.

You should take the meter to the electricity bureau, where there is a special department to check the meter, and your new meter will definitely not be accurate, and it will not be so different. Of course, you can estimate according to your electricity consumption, that is, 100W bulb uses 1 degree of electricity for 10 hours, 1 hour of electricity consumption, look at the size of your meter, if you can't see it, then the meter is fine, if you can see the difference, the meter must not be accurate.

It is said that the meter goes fast, how to find out the meter is tired? The method is so simple that electricians are reluctant to teach you.

Go to the local technical supervision bureau for accuracy appraisal, under normal circumstances, the positive and negative error of the level 1 table is 100 degrees of electric difference, and the 2nd level table is 100 degrees of electric difference. If it is inconvenient to go to the relevant departments for identification; There is a simple way, find a standard electrical appliance at home (water heater, rice cooker, etc., do not use refrigerator, air conditioner, etc.), look at the power marked on it, if it says 1000w, it means 1 kilowatt-hour of electricity. Observe the pulse constant marked on the nameplate of the meter, if it is 1200 imp kWh (mechanical meter 1200r kWh), it means that the pulse light flashes 1200 times, and the meter walks one word, and calculates the theoretical pulse flash time of the meter within 1 minute.

1200 60 = 20 times. Turn on the electrical appliances, count the lights of the meter (mechanical meter number turntable), observe how many flashes a minute, if it is 20 times, it is normal, otherwise it is abnormal.

The table is from the Electricity Bureau, and the Electricity Bureau also collects electricity bills, do you want to. . .

1. The new watch is sensitive.

2. Calibration is required.

If you don't go a few more times, the price will increase and you can accept that.

Wool . . .

Smart energy meters rely on pulse metering, which is highly accurate and very sensitive, very accurate. In the past, many small loads of mechanical watches could not be measured, such as the tiny current when the TV was standby.

When all meters are verified in the metering center, the staff will use the verification device authorized by the administrative department to verify the meter, and will not perform any other operation on the meter. Before the meter leaves the factory, the manufacturer will add a factory seal after passing the inspection, and the meter must also be verified and confirmed to be qualified before entering the citizen's home.

This can only show that someone may be stealing electricity when the meter has not been changed before. There is also the fact that the previous meter was inaccurate, resulting in excessive power loss, so it was necessary to replace it.

If you know someone in the Electricity Bureau, you know what's going on. This table is a lot of cats, don't listen to what they say is fair or unfair, the monopoly industry is not fair to consumers. If you really can't swallow this breath, you can only immigrate to a country that you think is fair, and there is no other way.

This is the case all over the country, and now the rated current of the new meter is 5A, which is much smaller than the previous meter.

I used to use about 120 150 per month, but this time I didn't turn on the air conditioner and used 468, I really want to know, what is the situation? We just changed the watch, each family has almost doubled several times, go to the hall, they asked to find an electrician, find an electrician they let go to the hall, I heard that it is our electricity bureau owes a lot of money, and now we are filling in the hole.

We live in a commercial house, is the municipal water supply power supply, the electricity meter is installed by the power supply bureau, the most expensive electricity bill every two months is more than 500 yuan month), now from last year the power supply bureau installed a new meter that is, the digital meter every year from the beginning of the month, each month electricity is more than 500 yuan, last month (July) electricity bill was more than 700 yuan (close to 1000 kilowatt-hours of electricity), I really don't know what kind of meter the power supply bureau installed?!

I feel the same way, almost double the electricity bill, hateful power bureau.

Why are today's meters moving faster than the previous ones?

Since the change of smart meters, the monthly electricity bill has increased four or five times, and this is what's going on.

Not only will the positive error steal electricity, but even the household electricity is also divided into gears, to give a strength, that is, the electricity bill for turning on the lights and turning on the air conditioner is not the same gear. Nowadays, the meters provided by the power supply company are small meters, generally 5A and 10A, no longer more than 15A large meters, once, the meter super-nuclear current will increase the electricity bill, the meter turns fast, and the electricity bill will naturally increase exponentially. For the high electricity bill after the meter is replaced, the relevant departments will verify whether there is a problem with the meter, and if there is a problem, the power company will be ordered to rectify.

If there is a phenomenon of high electricity bills after replacing the meter, inform the power department as soon as possible, and they will send staff to check the meter to see if the meter is damaged, if so, replace the new meter in time, and calculate the user's loss and compensate; At the same time, the user's electricity consumption is investigated to see whether high-power equipment is temporarily installed.

After verifying the situation, the relevant authorities will replace the meter for testing until the increase in electricity bills disappears.

We will continue to research more sensitive meters to calculate electricity consumption more accurately and ensure that we do not lose money.

It's not that our electricity consumption has increased, but the current smart meter is more sensitive, the previous meter is a mechanical meter, and the internal structure is mechanical, so the longer it was used before, the internal gear friction will be lost, and the more insensitive the meter size is, and some even stop being unusable, and now the new meter does not exist in mechanical models, and it is also relatively high temperature resistant, and it is more sensitive to power loss, so I always feel that the power has skyrocketed.

Why did the electricity consumption of replacing the new meter skyrocket, you ask?

This is due to the fact that the new meter is very sensitive, unlike the old one, which was 5 amps. This new meter is very sensitive, so you can feel that the electricity consumption is skyrocketing.

In fact, although this table is exploding, its accuracy is very high. This is because the technology is advanced, and the technology is advanced.

Maybe it's because I didn't pay much attention to it before, and the current electricity is unified by the country, and it won't say that the amount of electricity will skyrocket when you use a new meter, and what doesn't exist is the same.

It may be that the new meter is more accurate, accounting for even the slightest loss in the circuit.

The sensitivity of the meter is called "the size of the starting current". To put it in layman's terms, it is "the lower limit of the measurement range".

To put it bluntly, it is "the mechanical meter in the past did not count when it encountered a small current; Today's smart meters, as long as there is a slight breeze, will be billed."

Maybe it's a problem with the meter, right?