What should I do if my ipad is bricked How can I get it good 10

If the iPad is bricked, the system is damaged, and it can be repaired by updating the iPad system with "iTunes".

1. Open the "iTunes" software on your computer.

2. Turn off your iPad after iTunes is turned on, press and hold the Home button and connect your iPad to the computer with a data cable.

3. After the connection is successful, the iPad will enter the recovery mode.

4. Then click Update on iTunes.

5. Wait for the update to complete, and the iPad will automatically turn on.

The iPad is bricked because the system is damaged, and you can use "iTunes" to update the system of the iPad to fix it.

The detailed solution is as follows:

1. The first step is to open the iTunes software on your computer.

2. Turn off your iPad after opening iTunes, press and hold the Home button, and connect your iPad to the computer with a data cable.

3. Step 3: After the connection is successful, the iPad will enter recovery mode.

4. Step 4: Click Update in the dialog box that pops up on iTunes.

5. Step 5: Wait for the update to be completed, and the iPad will start automatically.

Follow this method to solve the problem of iPad bricking.

The iPad is bricked because the system is damaged, and you can use "iTunes" to update the system of the iPad to fix it.

The detailed solution is as follows:

Just use iTunes to update your phone's firmware.

1. Open the iTunes application of your computer, if your computer does not have iTunes installed, you need to install iTunes first.

2. Connect the brickipad to the computer with a data cable.

3. After the iPad is plugged in, iTunes will automatically detect it, click the "Update" button on iTunes, as shown in the figure below.

4. Wait until the iPad update is completed, and the iPad will start normally, as shown in the figure below.

Just use iTunes to update your phone's firmware.

1. Open the "iTunes" application on your computer, if your computer is not installed, you need to install iTunes first.

2. Connect the bricked iPad to the computer with a data cable.

3. After the iPad is plugged in, iTunes will automatically detect it, click the "Update" button on iTunes, as shown in the figure below.

4. Wait for the iPad update to complete and then the iPad will turn on normally, as shown in the figure below.

The iPad is bricked because the system is damaged, and you can use "iTunes" to update the system of the iPad to fix it.

The detailed solution is as follows:

Here's how to do it: 2. Enter DFU mode (non-recovery mode):

Open AISI Assistant;

Connect your iPad to your computer with a data cable.

When the data cable and iTunes icon appear on the iPad screen, press and hold the home button, and then press and hold the on/off button, but the icon disappears (about 5 seconds) and turns black, release the on/off key, but the home button is still held down, until the DFU mode shown in the following figure appears in the "My Device" of Aisi assistant;

Last night, I used to erase all the (function) in the ipad settings, and now it keeps showing white apples and can't start. I've already used Home+Power, but it still doesn't work, what should I do?

Generally, the hardware is not easy to break, and the software is broken and can be restored in this way, roughly iPhone iTouch iPad uses iPhone OS, and the operation is almost the same

How to enter DFU mode:

Keep your iPhone connected with the itune cable, iTunes on, and iPhone powered off.

Keep holding the home button for that circle and don't let go.

Press the power button again, remembering to press it only for one second, but don't let go of the hand that pressed the home button.

Wait for a few seconds, iTunes recognizes that there is an iPhone that needs to be restored, the iPhone screen is still black, and it has entered the DFU

How to enter recovery mode:

Keep your iPhone connected with the itune cable, iTunes on, and iPhone powered off.

Keep holding the round home button and don't let go, then keep holding the power button, remember to hold and don't let go until the apple logo appears on the iphone screen and then release the power button, but don't let go of the home hand.

Wait for a few seconds, iTunes recognizes that there is an iPhone that needs to be restored, and a data cable appears on the iPhone screen to connect to iTunes, and it has entered recovery mode.

That can only be taken back to the manufacturer and flashed back to the original system.

Regarding the Onda V971 tablet, the remedies for flashing the firmware with the SD card and causing the PC tablet to be brushed into bricks are:

You can use a wire brush to flash the machine, and the operation steps are as follows:

The firmware and flashing tools required for flashing the machine are unzipped and placed on the desktop.

3. After decompression, you will get a suffix as. exe file and a suffix is. IMG file, exe.

That's the flashing tool, img is the firmware, create a new folder, put them in it, and click on one.

The exe file will generate a bunch of files, which is the flash tool after decompression. Open Live in the folder

Select "No" on the box that pops up, then select "Select firmware", and select the unzip just now.

Come on. img format file, then don't close the window and look at the next step

4. If the tablet becomes bricked, please press and hold the shutdown button for 10 seconds to force it to shut down.

You can press and hold the menu button on your tablet (which is the middle of the three hard buttons at the bottom of the screen), no.

To let go, find a data cable to connect to the computer, and then press the shutdown button 10 times (you can't do this step.)

Release the menu key), and then a new window will pop up on the window of the flashing software just now, select "Yes", and then another window will pop up, also select "Yes", and then, wait for the flashing to complete

The detailed operation tutorial has been sent to your mailbox, check it in the private message in the upper right corner of the webpage, and the connection can be opened.