Sony L36H flashes into recovery

recovery flashes patch packages, beautification packages, kernels, etc.

2. When the indicator light turns on green, press the "Volume Up Button" to enter the recovery mode.

3. Return to the main interface, select [Install Zip from SDCARD], then select [Choose Zip from SDCARD], and then select the ROM package to put in the memory card.

4. Select Yes to install.

5. Wait for the flashing to complete.

6. After flashing the machine, return to the upper menu, and finally select [Reboot System Now].

7. Done.

There is the most comprehensive tutorial on Android phone flashing in the Qitu flashing forum. You can flash the forum by yourself.

I've encountered the same problem before, and finally found the flashing tutorial in the Qitu flashing forum to solve it.

Thank you. Welcome!!

1.Shut down the Sony L36H completely (if it doesn't work, buckle the battery, and install it after 5 seconds);

2.For models without physical buttons, press and hold the combination of "Volume Up Button" and "Power on and Off Button" to enter Recovery mode;

3.For models with physical buttons, press and hold the leftmost button on the front of the phone (usually the "home" button) and the combination of the "volume up button" button to enter the recovery mode, which is subject to the actual structure of the model.

4.After about 3 seconds after the screen is displayed, the phone will enter recovery mode.

1) Shut down and remove the SIM card and SD card;

2) Press and hold the power button to vibrate and press the volume + button continuously to enter recovery mode;

You can try a strong brush.,Normally, a strong brush eats all situations.,It's recommended to find a strong brush to help you brush.,Because it's going to be a bunch of drivers or something.。

Strong brush solves everything, hands-on ability is not strong, it is recommended to use iOS

Strong brushing can be done I was in the same situation as you before, just strong brushing.

You can force the brush, and if the strong brush fails, you can go to the forum to find a technical post for saving bricks.

You can shake it and brush it strongly, no problem.

Turn off the phone first, in the state of power off, at the same time press and hold the volume button + power button of the phone (3 10 seconds), and wait for the phone to vibrate or the boot screen appears, and then enter the recovery (engineering) mode

For some models, you need: When the phone is turned off, press and hold the up or down button of the power button + volume button + the home button or the back exit button on the phone screen at the same time (about 3 seconds), and the standby body vibrates or the boot screen appears, you can enter recovery mode.

After entering the recovery mode, press the volume key to move up and down to switch the selection item, and press the power button to determine the operation of the corresponding selection item.

Sony L36H Flashing Steps:

1.Launch the Sony L36H software.

Double-click the software icon to start the software, connect the Sony L36H and the computer with a data cable, and then confirm that the software and the phone are successfully connected for the next operation.

2.Import Sony L36H Flashing Package.

There are two ways for you to choose:

Way 1: The perfect flashing software has the "ROM recommendation" function, after connecting the mobile phone, the software will automatically display excellent ROM resources in the interface according to the model, so as to avoid the trouble of collecting ROMs, select your favorite ROM resources after browsing, click on the "one-click flash" software to start**Sony L36H Flash Package,** Run Sony L36H Flash Machine immediately after the software is completed.

Way 2: If you have prepared the Sony L36H flash package before flashing, then please click the "One-click Flash" button on the main page to switch to the flash page, click "Select", select the Sony L36H flash ROM package you have prepared, click "Open" at the bottom of the page to complete the operation of importing the ROM, click "Start", and the software will run immediately.

3.Start flashing.

The whole process of l36h flashing lasts about 5-10 minutes, and during this time, do not do any additional operations on the phone, such as moving and touching!

4.Sony L36H flashed successfully.

The software switches to the flashing success page, prompting you that the software has completed the Sony L36H flashing, now enter the automatic flashing mode of the phone, click "Finish", and wait for the phone to restart automatically. The successful restart of the mobile phone means that the L36H flashing process is over, and the first boot time is generally longer, wait patiently!

Cloud flashing machine, but it is still recommended that you let professional brushing personnel brush you, they have a machine

Method 1

1. Turn off the phone completely;

2. Press and hold the power button in the shutdown state, let go when the machine vibrates, stare at the light on the Sony logo at the top of the screen, press the volume + as soon as the light is on, and then enter recovery.

3. Use the volume button to select and the power button to confirm in recovery mode. You can do operations such as factory reset, Method 2

3. After the driver is installed, it will be connected to the mobile phone.

4. The mobile phone is connected, and you can find the utility in the driver wizard.

5. Find and enter recovery in the utility, and click it.

Sony does not have a recovery mode, you need to flash the machine to flash the third-party recovery

Use the flashing wizard to enter the computer.