What photocatalysts do you use at home and where do you sell them?

I know a friend who removes formaldehyde and told me that in actual operation, it is generally used in the decoration of personal new houses, especially for high-end furniture, leather and other interior decorations, the advantage is that it will not leave traces, and formaldehyde can be removed without the participation of light, and the effect of removing aldehyde is better than that of photocatalysts, and the important thing is that it is safe and free of secondary pollution. Therefore, the photophyll that has been used at home removes formaldehyde and other peculiar smells. If you buy it, you don't want to buy three no products, and there are generally some products sold on the Internet.

If the formaldehyde exceeds the standard, then treat it, you can carry out long-term ventilation, let the air convection bring the indoor harmful gases out of the outdoors, you can also use some activated carbon for physical adsorption, and a variety of large-leaf formaldehyde absorbing plants are good. However, all of the above must be carried out for a long time, and cannot be managed all at once. If you want to treat formaldehyde quickly, you can use cyclic & kang aldehyde enzyme, which can quickly and effectively control formaldehyde, benzene and other indoor harmful gases.

In fact, formaldehyde cannot be completely removed, and formaldehyde also belongs to the type that is slowly released. Therefore, according to the characteristics of formaldehyde, a Huankang nano aldehyde removal enzyme has been developed, which can well control formaldehyde, and there is no harm or anything, and there is no secondary pollution, which can be said to be the best product in addition to formaldehyde, but it is metal, cloth, wallpaper or something can not be used to remove formaldehyde, no one is perfect, of course, this has the defect that the metal can not be removed, but it can be adsorbed with some live ores.

This is now a lot of ** not expensive in short, I support domestic products Hehe.

Photocatalysts. It is an auxiliary method for the treatment of formaldehyde, mainly because it cannot decompose formaldehyde in the dark or under lightless conditions, can not operate around the clock, and its range of action is small, and it cannot effectively remove formaldehyde in the room. In addition, photocatalyst itself is a chemical and needs to be used with caution.

1. Wise Stone.

It is currently a cost-effective formaldehyde removal product, and its advantage is that it can be decomposed into water and carbon dioxide while absorbing formaldehyde.

A substance that is harmless to the human body, due to its decomposition characteristics, so that it will not appear adsorption saturation and indoor secondary pollution, and is suitable for various types of environmental use. In addition, its removal rate is also dozens of times that of traditional adsorbent materials

2. Wind fan.

If you want to eliminate formaldehyde in the house as soon as possible, you can put a floor fan at home after the decoration is completed, and open the window for ventilation at the same time, if the outdoor wind allows, the fan can increase the flow speed of indoor and outdoor air, reduce the indoor formaldehyde content, and speed up the release of formaldehyde, it may be the most effective and low-cost way.

3. Plants.

Putting some greenery in your home can also be effective in removing odors, especially pothos.

Spider plant, aloe vera, monstera, cactus, ivy.

and so on can effectively absorb harmful gases. In addition, large plants such as the Ping An tree and the camphor tree, which are more popular on the market, can release a fresh gas on their own, which makes people feel happy, and is also more suitable for removing the smell of new furniture.

Fourth, the fresh air system.

Fresh air system. During the period when the window cannot be opened, fresh outdoor air can be introduced through the system's filtration device to discharge indoor harmful substances, which will reduce the concentration of free organic pollutants in the indoor space to a certain extent and accelerate the release rate of pollutants. Through continuous circulation, the indoor decoration pollution is controlled.

5. Formaldehyde remover.

Formaldehyde scavengers are chemical reactions.

Formaldehyde treatment, after the completion of spraying, can quickly achieve the purification effect, the pollution value will be significantly reduced or quickly reached, but for the chemical treatment of formaldehyde, under the conditions of changeable environment, there may be secondary pollution, and it can only treat the formaldehyde that has been volatilized into the air, for the subsequent volatilization of formaldehyde treatment effect is not particularly ideal, want to remove formaldehyde from the root, can only be used as an auxiliary method.

Formaldehyde, as a colorless and toxic gas, if exposed to it for a long time, will seriously affect people's health, and even suffer from respiratory diseases, and can also cause allergic rhinitis.

pigmentation, so be sure to remove formaldehyde before moving into a new house, and it is recommended to carry out multiple methods at the same time.

No matter what brand the photocatalyst is, it is the same, and the things are the same. As a senior industry person, I will tell you very clearly that photocatalyst is not the best choice for removing formaldehyde. Photocatalytic technology is what we often call photocatalyst technology, and photocatalyst technology can only work normally under ultraviolet irradiation.

Sometimes the light is not enough, and the effect is greatly reduced. In addition, long-term exposure to ultraviolet rays can cause great harm to the human body, and this technology can only be used in a closed environment of the machine. Therefore, photocatalysts are generally only used for wall treatment, and the cabinets are all backlit surfaces.

Because the photocatalyst needs the participation of light to reflect, it is used in the industry to remove formaldehyde more, but in the ordinary household management of formaldehyde, according to the advanced experience of EU countries, the use of photophyll as a catalyst ** photocatalyst is more, photophyll originates from the photoreceptor molecules of green plants, even in the indoor environment, even in a very weak light environment can decompose formaldehyde, more importantly, it is completely decomposed.

Photocatalyst as a decades-old technology, saying that he is useless is usually not understood. A good photocatalyst needs to have air purification (removal of harmful substances such as formaldehyde and TOVC benzene), sterilization and disinfection, odor elimination, self-cleaning and other effects. Most of the domestic products do not meet the requirements, and they need to be effective and have good adhesion.

NASA uses the photocatalytic product PURETI titanium clean to purify the air and the self-cleaning of space plates, and TOTO uses this technology to make self-cleaning sterilization toilets, and there are many successful cases of practical combination.

Photocatalyst has been controversial, in fact, the old photocatalyst received ultraviolet restrictions, it is not recommended to use, the back of the technology is advancing, now only visible light can be decomposed, so it can still be considered. Some better can choose photophyll materials to decompose formaldehyde, which can be decomposed with and without light, mainly with the participation of plant extracts.

Step 1: Open the windows for ventilation. The best way is to open the window for ventilation for a long time, or you can use an electric fan to assist in accelerating the convection of indoor and outdoor air.

Step 2: Photophyllin, extracted from the plant body, can enhance the photosensitivity of plants, and can also improve the light sensitivity of photocatalysts.

Step 3: Adopt the plant decontamination method. Indoor suitable planting of flower plants are: spider plant (including orchid grass), cactus (cactus family), aloe vera, etc., such plants have a certain purifying effect.

Nowadays, no photocatalyst is used, which can be degraded without visible light and ultraviolet irradiation, and does not leave a disgusting white powder like a photocatalyst. Chigaran can.

At present, the best way to remove formaldehyde on the market is the photocatalyst formaldehyde removal method, which is of course effective when applied to the household to remove formaldehyde, but it also has its limitations. The photocatalyst will only act under ultraviolet irradiation, and the ordinary indoor light is weak, and its strength and energy level are not enough to catalyze the photocatalyst, and the amount of decomposition is very limited, so the effect of directly using the photocatalyst for indoor formaldehyde removal is not ideal. Some scientific research institutions have also put forward some improvement methods, such as adding nano-silver ions and other components in the production process of ice insect photocatalyst at Zhejiang University, which can effectively catalyze harmful substances even in the case of low light, and effectively treat furniture, cabinets, drawers and other places with insufficient light.

This question cannot be given, and it is also a suspicion of advertising - because there is no well-known brand recognized by the public in the photocatalyst industry.

Photocatalysts are polluting and not suitable for household use. It is very good to use photophyll and balcoidan to remove formaldehyde in all corners of the room and decompose formaldehyde.

It is best to choose a photocatalyst that can catalyze the decomposition of formaldehyde in the absence of light at night, and the photocatalyst is mainly sprayed on the surface of the substrate to form a protective layer and catalyze the decomposition of formaldehyde at the same time. Like the latest generation of platinum photocatalyst, after adding platinum photocatalyst, it can excite the potential difference between crystals, and it can also catalyze the decomposition of formaldehyde under the condition of no light at night.

Jiangsu Ruiyuan Environmental Protection Technology Co., Ltd., a Sino-Japanese joint venture company, exclusively introduces Japanese-funded technology production.

Photocatalyst is a new type of product, so you should pay special attention when purchasing. So do you know what to look at when buying photocatalysts? What are the precautions for using photocatalysts? Today, let's take you to find out.

1. What to look for when buying photocatalysts.

1. Stability.

The photocatalyst dispersion technology is better, and generally will not stratify and precipitate, but if the nanoparticle size is small and there is no dispersant, then there may be a little condensation when standing for a long time, and it can be shaken a few times when used without affecting the performance. If it is easy to precipitate and there is a lot of precipitation, it is a shoddy photocatalyst product.

2. Look at the lighting conditions.

The photocatalyst acts as a catalyst after absorbing the energy of the circular fiber, and the photocatalyst in the lightless state has no energy**, so it has no effect. According to the data, there are still very few products that can be mass-produced at 550nm.

3. Look at the early imitation fade function.

Methyl blue is diluted and dropped on a porcelain piece that has been sprayed with photocatalyst, and the blue color disappears quickly after being exposed to light. If it cannot fade or the fading is not obvious, it is a shoddy photocatalyst product.

4. Look at the color.

Due to different preparation methods and different uses, photocatalysts present different colors, and the common colors are milky white, light yellow, light blue or colorless liquid, translucent liquid. If the color is dark, it is a shoddy photocatalyst product.

2. What are the precautions for using photocatalysts?

1. To ensure the spraying effect of atomization, to ensure the amount of spraying, the use of related products should correspond to its dosage. During the spraying process, it is necessary to pay attention to the dosage and uniformity of the photocatalyst, do not spray too much, avoid the formation of droplets, and fully shake the photocatalyst inverted before use.

2. The explosion-proof film that blocks ultraviolet rays will have a certain impact on the working efficiency of the photocatalyst, but it has little impact.

3. The better the indoor air circulation, the better the photocatalyst effect, and the larger the construction area, the better the effect.

4. The reaction principle of photocatalyst requires decomposition under the conditions of sunlight, light and ultraviolet light, and it is necessary to decompose harmful gases under the conditions of light and sunlight according to the product performance and the instructions for use.

The above is the explanation of the points that need to be paid attention to when buying photocatalysts and the precautions for use, and you must pay attention to them when buying and using.

Formaldehyde will exist in a new house just after it is renovated, and many people will use photocatalyst to remove formaldehyde, so what is photocatalyst? What are the brands of photocatalysts, let's talk to you today.

1. What is a photocatalyst?

Photocatalyst is a nano-level titanium dioxide, under the irradiation of light, catalytic degradation reaction is carried out to achieve the treatment of formaldehyde, benzene, ammonia and other pollutants in the air, which has a good effect on sterilization, the antibacterial rate is very high, and it also has the effect of antifouling and deodorization; The effect of high-quality photocatalyst can last for a long time, and photocatalyst is now used in many fields such as space stations, home improvement, and public facilities.

2. What are the brands of photocatalysts?

1. Oin. Guangzhou Aoyin Environmental Protection Technology Co., Ltd. is a subsidiary of Huazhi Special Materials Technology Co., Ltd., a leader in the photocatalyst industry, and is a high-tech enterprise focusing on the field of indoor pollution control. With the mission of continuously improving the indoor air rolling chain environment and creating a green space, Aoyin Environmental Protection Company is committed to the development and promotion of products and application technologies in the field of indoor pollution control, serving the global market, and providing the best indoor pollution control products and solutions.

Founded in the United States in 1902, M3M China is one of the world's top 500 companies and an internationally recognized pioneer in the field of R&D. As one of the world's leading diversified technology innovation companies, 3M's products and technologies have long been deeply integrated into people's lives. For more than 100 years, 3M has developed nearly 70,000 products, from household goods to medical products, from transportation and construction to commerce, education and electronics, communications and more.

3. Lister.

Guangzhou Lister Environmental Protection Technology Co., Ltd. is one of the top ten brands of photocatalyst-photocatalyst, the product is known for its strong pertinence and convenient application, and integrates the research and development, production, sales and engineering management of photocatalyst series products.

4. Bihua. Founded in 2005, Bihua has the world's leading air and purification photocatalyst production technology, and is one of the earliest intelligent environmental management system companies, air purification solution integrators, well-known enterprises in the air purification industry, professional sponge city service providers, and green building engineering consulting experts.

After the above introduction, everyone knows what photocatalyst is, right? When you buy photocatalysts, you must choose big brands with quality assurance, don't blindly follow the trend, so as not to buy inferior products.