Enter 192 168 99 1 on your mobile phone and computer 1 Why can t I enter the wifi interface?

1. Set the IP address of the computer correctly.

On the Lenovo NEWIFI wireless router.

Before setting the settings, you need to set the IP address in the local connection of the computer to be automatically obtained (dynamic IP), as shown in the figure below. If you don't know how to set it, please read the article: How to set your computer's dynamic IP address.

2. Connect the Lenovo NEWIFI router correctly.

1. **Online Internet access: Please prepare 2 short network cables, one network cable is used to connect the WAN interface between ADSL Modem (cat) and Lenovo NeWiFi router; Another network cable is used to connect any of the Lenovo NEWIFI routers, LAN1 and LAN2 to the computer.

2. Optical brazing Internet access: Please prepare 2 network cables, one network cable is used to connect to the optical modem.

WAN interface with Lenovo NEWIFI router; Another network cable is used to connect any of the Lenovo NEWIFI routers, LAN1 and LAN2 to the computer.

3. Network cable home Internet access: Please prepare 1 network cable, and first plug the home network cable provided by the broadband operator into the WAN interface of the Lenovo NEWIFI router; Then connect the network cable you have prepared, one end to the computer, and the other end to connect any one of the Lenovo NEWIFI routers, lan1 and lan2 to the computer.

<>1), according to the above way to connect to Lenovo Newifi wireless router, the computer can not access the Internet temporarily, when the router completes the Internet settings, the computer can automatically access the Internet, no longer need to use the computer on the "broadband connection" to dial up the Internet.

Finish. 2) When setting up a wireless router, you don't need to have a network, you only need to connect the LAN port of the computer and the router with a network cable, and you can set it up; Many novice users think that they must have an Internet connection in order to set up a router, which is wrong.

There is usually a small dot on the router that is pressed and pressed to restore the original state, and then in the setting of the address of your router and setting it. Generally, the dial is set up, and then it needs to show that it is connected. Your mobile phone WLAN has a wifi icon in it, so as long as there is wifi set up, you can connect to it, but there is no network, you have to go to the web page on the computer, set it up, show that it is connected, you connect to wifi to have a network.

There is no login screen for mobile input.

Dear, hello, I'm glad to answer for you, there is no login interface for mobile phone input Answer: First, the mobile phone search is connected to the router wifi signal of the general wireless router in the factory, the wireless wifi function has been enabled by default, and there is no password, but the world can do it to connect directly. So, turn on the wifi function on your phone, search for and connect to your router's wifi signal.

Pay attention to the problem of wireless connection of the mobile phone to the router: Under normal circumstances, as long as the mobile phone can search for and connect to the wifi signal on the wireless router, then enter it in the mobile phone browser to open the settings page. If it still doesn't open, continue with the steps below.

Second, when entering the address bar of the mobile browser to answer questions on QQ and WeChat, it was found that many users did not enter the search balance in the address bar of the mobile browser at all, but entered it in the search box of the search engine, and at this time it was definitely impossible to open the setting interface. Therefore, please be sure to enter in the address bar of the mobile browser.

3. Check the IP address of the router settingsSome routers have a set address ofWait; If you enter it in the browser of your mobile phone at this time, you will definitely not be able to open the router settings page.

Check how to set the IP address of the wireless router: There is a label (name plate) at the bottom of the wireless router, which indicates the management IP address of the router. Please check your router's settings to see if the IP address of your router is or not

4. Check the sensitive IP of the mobile phone When the mobile phone is connected to the wireless router, you need to set the IP address on the mobile phone to be automatically obtained (also known as DHCP, dynamic IP); Generally, by default, the IP address on the mobile phone is configured to be of the DHCP type, so there is no need to set it. If your mobile phone is connected to other WiFi signals and can access the Internet normally, it means that the IP address on your mobile phone is already DHCP type, and you can ignore this step. If you can't connect to other WiFi, you can check the IP address settings on your phone.

5. Resetting the wireless router may cause confusion in the configuration on the wireless router due to various reasons, resulting in the user being unable to log in to the settings page using the mobile phone; At this time, you can try to reset the wireless router (also known as a factory reset). Factory reset method: On the body of the wireless router, there is generally a RE

It should be entered in the browser of your phone.

Most wireless routers are:

Most normal routers are.

Of course, different router models may also have different management connection addresses, and you can find the management connection address by looking at the router manual or the label at the bottom of the router.

Which will cause the router management page to not open:

Connection Management Input Error.

There could be an issue with the network connection.

The username and password entered are incorrect.

The router is not connected to the power supply.

Check whether your device is normally connected to the router wifi that needs to be set, using a mobile network or connecting to the wrong wifi is inaccessible; It could be a problem with your router's network, or it could be that your router page is not accessed through. Here's a closer look:

1. First of all, check whether your device is normally connected to the router wifi that needs to be set, if you are using a cellular network or connected to other wifi, it cannot be entered;

2. Check whether your router is working normally, check whether the wifi signal status light is on, it may be because your router does not turn on the broadcast function, and your mobile phone cannot be connected to the wifi of the road stove generator;

3. In addition, it is also possible that your router is relatively new, it may be that you need to enter a specific **address, you can open the manual of the router or the label at the bottom of the router to view, for example, some of the routers of Feixun are entered into the ruler banquet to set the page of the silver face;

4. You can check whether your browser settings and firewall block this address, and unblock it;

5. If you can't get in after opening **, it may be that the password is forgotten or the computer is restricted from logging in, if you have to modify it, you can only press and hold the [reset] button of the router to reset the settings, and then reset the router;

Heart of Kings 2 click to play

Make sure your phone is connected to the wifi emitted by your router.

Enter in the address bar of your phone's browser to start accessing the router settings.

Enter the login password of the wireless router on your mobile phone to enter the router settings interface.

The reason for the mobile phone login failure.

1. The login failure is caused by the default address of the router. For example, Huawei routers will set the default address of the router, while some other routers will use a special address instead as the login address.

2. You can log in with your mobile phone, but you forgot the router administrator password.