What is the best way to deal with water after your phone gets into it?

If you use a vivo mobile phone, the liquid inlet treatment method of the mobile phone is as follows:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the "vivo official website vivo**" APP--my--service outlets after-sales outlets--select provinces and cities to inquire about service center information.

**Link.

Sorry to hear this news if you are using a Huawei phone.

To reduce your losses, we recommend that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can use the following link to find the address of a Huawei Customer Service Center near you.

Customer Service Center.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of precision electronic components.

There is a potential risk after water ingress, so please keep your phone turned off.

4.If there is no backup data.

There may be a risk of data loss when repairing. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Mobile phone water treatment method:

1.Shut down immediately.

If the phone falls into the water, you need to salvage the phone immediately, and quickly press the power off button to turn it off, if it is a detachable phone, then we can take out the battery, memory card, etc. first. Powering off the phone first can prevent the battery of the phone from being caused by a short circuit**, if the phone is falling vertically, it is best to pick it up vertically.

2.Remove moisture.

After the phone is scooped up, you need to wipe the surface of the phone with a clean towel and other items, and then wipe the earphone jack and other parts with a fine cotton swab. Do not shake your phone dry too hard, as this may allow water from the surface of the phone to seep deeper into the area.

3.Blow dry with a hair dryer.

For the moisture inside the phone, we can use a hair dryer to dry it. Do not use hot air in the process of using the hair dryer, keep a certain distance between the hair dryer and the mobile phone, it is best to let the wind blown out of it be close to room temperature, do not direct the air outlet of the hair dryer to the mobile phone, usually the hair dryer blows the mobile phone for about 20 minutes.

The first step is to salvage: whether the mobile phone is dropped in the basin, in the toilet, by the lake or in the rain, the first step, don't be in a daze, and let the water machine get out of the water source as soon as possible. Because the longer it is in the water, the greater the damage to the mobile phone, such as the motherboard, screen, battery, buttons, etc., just like a person drowning, the sooner you are rescued, the greater the probability of survival;

Step 2: Wipe dry: After scooping up from the water, immediately wipe the surface of the phone dry with a dry paper towel, rag or even clothes, take out the SIM card slot, and use a paper towel to absorb water at each opening of the phone. Remember, don't press the power button and volume button, don't turn on, don't turn on, don't turn on, don't turn on, this is the most important point, because once turned on, due to the water in the fuselage, connecting the power again will cause the motherboard to burn out;

The third step is drying: use a hair dryer to turn on the hot and cold air alternately, aiming at the openings of the mobile phone, such as the charging port, headphone hole, SIM card slot, etc., if it is soaked in water, you need to blow for a while, if it is only partially watered or partially watered, you do not need to blow for too long. Then you can put the phone in a pile of rice or desiccant, and you can take it out after a few hours;

Step 4Try to boot: After the above steps, you can try to boot up, if it can boot normally, don't be happy too early. Check whether the buttons, fingerprint recognition, screen touch, and speaker of the mobile phone are normal;

The fifth step of after-sales maintenance: after the first four steps are invalid, send them to after-sales. Ask if you can repair and repair**, and if you can repair and **acceptable, you will repair it.

What is the best way to deal with water ingress? Shutdown. In order to avoid more damage to the phone, quickly wipe the moisture on the phone with a paper towel, and do not let go of the charging port and earphone port, then take out the SIM card and memory card, and place the phone in a dry and ventilated place.

The "put the mobile phone in the rice to dehumidify" circulated on the Internet, or try not to be gullible In case the mobile phone is not saved, the charging port is also blocked by the rice, and the gain outweighs the loss However, in case the moisture in the mobile phone is not cleaned up, it may cause damage to the mobile phone device after turning on, in order to reduce the risk, it is better to go to the after-sales inspection Kangkang

After the mobile phone enters the water, the first time must take out the mobile phone, wipe the water dry, and then if the mobile phone is still in the interface with the screen, there is brightness, can be bright, then leave him alone, it is best to put it in a dry and ventilated place, let it dry naturally, but if the mobile phone is water, the mobile phone has been turned off, do not turn on the computer without permission, which is easy to cause the mobile phone circuit board to burn out.

For example, if the mobile phone has just entered the water, it should be fished out, if the mobile phone has just entered the water, if the mobile phone has just entered the water, it should be fished out, or it should be opened and blown with a hair dryer, and then put it If the mobile phone has just entered the water, it should be fished out, or it should be opened and blown out with a hair dryer, and then placed under the sun.

Quickly remove the phone, wipe the water marks on the surface of the phone, and remember not to try to turn it on. Then remove the battery and blow it three times with a hair dryer at a suitable temperature to the hole in the phone for three minutes each time. Put the phone in the rice and let the water in the phone slowly absorb it.

The correct way to deal with the water ingress of the mobile phone, turn off the mobile phone as soon as possible, if it has been automatically turned off, do not try to turn on the computer and do not charge, otherwise the motherboard fault will expand, causing greater losses, send it to the repair shop or after-sales disassembly to clean the motherboard as soon as possible, and then turn on the test, and the faulty ones need to be repaired.

Don't turn it on, it's best to air dry naturally, don't turn it on, if you're in a hurry, you can use a hair dryer to dry it, and then turn it on after a while in nature!

If you want to deal with it after entering the water, the best thing is to take it to a repair shop to repair it, disassemble the phone and clean the water inside.

First, immediately wipe off the surface moisture. Turn it off, remove the battery, dry it with a hair dryer if you can, and then send it to a professional after-sales center for repair.

1.The phone turns off immediately It doesn't matter if your phone has been in the water for a long time or has fallen into the water.

2.Taking a hair dryer to blow off the power is only the first step, and now you must not turn it on, it will be damaged after turning it on.

3.Rice quick-drying or desiccant sealing method.

When I was in college, I had a classmate named Ah Jing. He was a very gifted young man, a graduate of the most prestigious polytechnic school in the South, majoring in mechanics. He was one of the most outstanding and anticipated students of our class, graduating as an outstanding graduate of the Academy of Engineering and having won a medal in the International Mathematical Contest in Modeling.

If the mobile phone is flooded, first of all, see if the water ingress of the mobile phone is serious? If it's not serious, you can use a hair dryer to blow it, or put it in a cool place to see if it can air dry naturally?

Mobile phone liquid inlet treatment method:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the "vivo official website vivo**" APP--my--service outlets after-sales outlets--select provinces and cities to inquire about service center information.

Dry the water stains on the surface of the phone with a paper towel and shake the phone gently. 2. Turn on the hair dryer and blow it on the mobile phone for a while, you can blow the mobile phone alternately with hot air and cold air. 3. Use a screwdriver to open the phone case, and then gently wipe the moisture in the phone with a paper towel.

4. If there is no response, it may be that a part of the mobile phone is broken, and it is recommended to go to the mobile phone repair point for repair.

If you use a vivo mobile phone, the liquid inlet treatment method of the mobile phone is as follows:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and come in to suck out the water in the gap; When absorbing water, try not to move your phone;

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera facing upward;

5. Bring your mobile phone to the vivo customer service center as soon as possible and let the maintenance engineer conduct professional testing. Customer service center address: Enter the vivo official website vivo**app--my-service outlets or vivo official website web version--bottom of the bottom--service support--service network inquiry--select the province and city to query the customer service center address.

It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

Wipe the water on the mobile phone first, turn off the phone as much as possible, do not keep pressing the power on and off button, do not drop the mobile phone hard, in case the water enters the chip and causes inevitable damage, it is recommended to put the rice cylinder around you to remove the water in the mobile phone, if not, it is recommended to put the mobile phone in a place with air circulation.

1. Wrong method:

1.Dry with a hair dryer.

2.Shake the phone to dry.

Second, the correct way:

1.Dry the surface moisture with a paper towel and cotton swab.

2.Rice and desiccant blotting method.

3.Rice cooker steaming method.

Today's mobile phones are not only powerful, but also faster and faster, and in the past two years, there is one more waterproof function, but the waterproof function of most mobile phones can only prevent water from accidentally splashing in life, or water in a very short time. I believe that many friends have also had the experience of water entering the water, so how to deal with the water if the mobile phone is in the water? Let's take a look!

To drain the liquid on the phone, you can use toilet paper and other tools to absorb the water in the gaps of the mobile phone and absorb the water in the mobile phone as much as possible.

First, what we need to know is to get the phone out of the water as soon as possible. I don't need to introduce this, but you should know it. Although many people have now heard the introduction of merchant shopping guides.

Everyone generally believes that today's mobile phones have advanced waterproof and dustproof technology, so that the mobile phone can be soaked in water for a long time and miss the first time to pay attention to the mobile phone. Therefore, I would like to remind consumers that if such a thing happens, the first thing we should do is to fish out the mobile phone in the water. I don't know if you remember?

Second, when our phone gets into water, don't try to turn it on. Because after the mobile phone is flooded, once the mobile phone is powered on, the internal components are likely to be burned out immediately. Therefore, it is very dangerous to turn on and off the mobile phone when it is in the state of water ingress and turn it on.

All we have to do is to remove the board and dry it. But if it can't be disassembled when the conditions don't allow, we can use a hair dryer instead of a dryer to slowly blow the air to dry the moisture inside the hole of the mobile phone.

In particular, we want to remind everyone that we must not use too high a temperature when drying with a hair dryer, and if we use too high a temperature, the components inside may also be burned out.

Third, if you can't find a hair dryer in an emergency, there is a very practical way to put the mobile phone in the water and bury it, the rice is dry and has strong adsorption, which can quickly absorb water.

Finally, after drying according to the method described above, you still have to wait for a while before turning it on, or charging the phone. If you still can't turn on the phone, then you can only recommend that you go to a professional mobile phone repair shop to deal with it.

Mobile phone is a tool that everyone often uses, in daily use, the mobile phone will inevitably bump and bump, this is a very normal thing, generally will not cause damage to the mobile phone, but after all, the mobile phone is an electronic product, very afraid of water, there are many friends after the mobile phone fell into the water, because of improper handling, and finally led to the scrapping of the mobile phone. In fact, the waterproof performance of today's mobile phones is relatively good, as long as it is handled properly, the mobile phone will generally not have much damage. So what to do if you drop your phone in water?

Let's find out together.

Let's take a look at the methods that we usually use, after many people's mobile phones fall into the water, the first time is to take out the mobile phone and blow it with a hair dryer, and it is blowing on the opening of the mobile phone, thinking that it can be dry by blowing, in fact, the mobile phone itself is waterproof, under normal circumstances, a short period of soaking in water, it will not penetrate into the motherboard, since it will not go to the motherboard, there is no big problem.

However, if you use a hair dryer to blow it, it will cause water droplets to be forced to the motherboard, which is full of hardware and various wiring, and once it encounters water, it will definitely cause a series of problems such as short circuits. But it's not that you can't use a hair dryer, it's that you haven't mastered the method.

The correct way is to first place the hole of the mobile phone, that is, the place where the mobile phone enters the water, vertically downward, so that the water comes in from the **, after fixing the mobile phone, use a hair dryer to blow from the non-porous place to the place with the hole, so as to avoid bringing water droplets to the motherboard, and you can also heat the mobile phone to a certain extent to accelerate the evaporation of the water inside, but the temperature should be controlled well, and the mobile phone should not be excessively high. In addition, the phone is turned off during the whole process.

This is just an indoor practice, if the outdoor sun is very good, it is easier to do, wipe it with paper, and then fix the phone vertically according to the above method, and put it in the sun to expose it, but this process does not need to be turned off, but the whole process is turned on, and the speaker is turned on to the maximum. Wait 15 minutes to 30 minutes.

The principle of this is very simple,Vertical placement of the mobile phone will not let the water droplets flow to the inside of the mobile phone,Exposure to the sun is to accelerate the evaporation of internal moisture,The last speaker is more important,Although the sound of the speaker is not as good as the sound,But we are not for listening**,But in order to bounce the moisture away from the speaker through the speaker vibration,You can also accelerate the flow of air through sound waves,So as to take away the moisture。

However, the waterproof level of mobile phones is very high, under normal circumstances, if the mobile phone falls into the water and picks it up immediately, shake it a few times and then wipe it dry, there will be no problem, even if it enters the water, it is only one drop or two drops, and it has to reach the motherboard through layers of obstacles, even if it reaches the motherboard, it has to pass a distance to various lines, and the water may have evaporated at this time. Friends, have you ever encountered a situation where your mobile phone fell into the water? If so, how do you deal with it?

If you have a better opinion, remember to share it with your friends.