-
Anonymous users2024-02-06Then search the official website according to the corresponding "chip manufacturer", and search for the words "chip model" + space + "mass production" on the official website (the chip model is scanned by Chipgenius in the previous step of the beam key).
After searching, pay attention to check the applicable chip manufacturer and chip model in the description under the mass production tool, and you can use it after confirming that it is correct. Kingston is generally Phison's mass production tool, ** there will be a pdf help in the future, the use method is very detailed, please read and study carefully before starting mass production.
As long as the mass production tool is selected correctly, and your rubber draft is not a stall, then mass production is not risky. However, the number of mass production should not be too much, and the U disk will be lost. (The best way for this kind of problem is ** help, if you need help, you can see the space my contact).
If you have any other questions, please click "" if you are OK
-
Anonymous users2024-02-05USB flash drive mass production tool. exe should be this.
-
Anonymous users2024-02-04The mass production failure must not be displayed, and you have chosen the wrong mode, and the mode 8 should be opened with special encryption software. You can mass-produce back to mode 3 (single moving disk).
-
Anonymous users2024-02-03The interface is not compatible, leave you deducted, and I will take a screenshot to teach you!
-
Anonymous users2024-02-02Kingston U disk poison symptom 1: Identify the disk letter name display move disk G disk original from the setting name can be displayed 2: Attribute display with space, used space, capacity is zero, all content can be entered 3:
Use the USB disk to kill the assistant to check and kill the display U disk write protection my disk does not have an outside paddle write protection at all to talk about 4: format prompt, please insert the disk.
Which chivalrous gang to help the younger brother, Shengji, can recover the face information more.
-
Anonymous users2024-02-01Take a look at whether your USB flash drive has a built-in write-protected switch, and if so, find it to turn it off.
If you don't open the software in your computer system that may lock the USB stick, then cancel the lock function. For example, the USB flash drive antivirus software generally opens a USB flash drive immunity function, the purpose of which is to prevent the USB flash drive from unknown origin from being displayed in the system. As long as this function is canceled or this USB flash drive is included in the no-kill list, it can be used normally.
If your USB flash drive is write-protected only by the relevant folders or files in the USB flash drive, then this problem is not the cause of the USB flash drive, but the system settings. At this time, you only need to perform an antivirus treatment on the system, and then change the properties of the folder or file.
-
Anonymous users2024-01-31Take a look at the properties of your USB flash drive, whether it is "read-only", if so, change it to "archive"; If not, whether the USB flash drive storage is not full, yes, please optimize and delete the unwanted files; If not, "Show hidden files" in "Tools", whether they are invaded by viruses and cannot be "written".
-
Anonymous users2024-01-30Hello, the mass production model may be wrong, and re-mass production can be solved.
-
Anonymous users2024-01-29It may be that you didn't set up the mass production tool, re-set it, and mass production again can solve it
-
Anonymous users2024-01-28Hello. After the mass production of the disk, it should be able to be used as a guess.
It could also be that there is a problem with the physical hardware of the disk.
-
Anonymous users2024-01-27I'm selling U disk.,I've encountered this situation many times.,It's not possible to find a master for mass production.,If you're buying**,You can go for a new one.,Yourself。。 It's really hard to get it done.
I am a seller of USB flash drives, and I recommend Kingston licensed goods.
I'll tell you a few simple ways to identify them that work.
1.After plugging in the computer, the front end flashes a small green light, and the intermittent flashing is genuine, and the rest of the color is equal or green, or the light that has been on is fake2Shell Take the lid off and cover it to the back If you press it hard, there will be a crisp sound The shell is real.
If the shells are not real ... It can't be genuine.
3 Side, there is spraying, this is not easy to see, and the slightly astringent is really because it is laser embroidered.
If it's fake, it's sprayed paint and it's slippery.
Hope it helps.
-
Anonymous users2024-01-26Insert the U disk first, click on the desktop - My Computer, then click on the icon disk where the U disk is located, enter the folder, see the icon disk on the left (WinXP operating system) (other locations) below, right-click on it, the disk properties appear, select (Tools), then select (Error Correction) (Start Checking), then tick (automatically repair file system errors), click (Start). Okay ok! That's how I fixed my Kingston USB flash drive and wrote the protection, and I read the others and said that I want to format it a little sweaty!
-
Anonymous users2024-01-25This situation cannot be replied to with software!
To pry open the USB flash drive shell, short 29-30 pins!
The USB flash drive will restart!
I've tried!
-
Anonymous users2024-01-24When you mass produce,Don't choose to make a secret disk,You choose to make an ordinary disk,It's up to you to choose whether to write or not to write.。
-
Anonymous users2024-01-23Basically, it's okay by default.,Don't mess around if you don't understand.,
-
Anonymous users2024-01-22At that time, there were problems with welding, there were a lot of problems of this type, and it could be used after soldering, but it didn't work after a period of time, maybe you can take it to soldering again to bring it back to life, but it won't last long, because it is likely that the main control chip has been damaged, resulting in the U disk can not be recognized.
-
Anonymous users2024-01-21I have encountered the problem of write protection, originally my U disk did not turn on write protection, when writing data, always prompt what media is protected or something, in fact, this reason may be that the U disk has a virus before or there is a virus on the computer, and the antivirus software on the computer intelligently cuts off the write with the U disk, at that time my U disk is readable, it is impossible to grid, and with mass production tools can be gridded, but it still prompts that the medium is protected! In a fit of rage, everything was OK after reinstalling the system
-
Anonymous users2024-01-20Very few people succeed in mass production. It's just that there are no measuring tools. As for the tools you mentioned, they couldn't read that it was a chip of SSS6690 SK6211, so mass production was unsuccessful.
I use Kingston 4gu plate license normally. Low-level tools are not recognized. I don't know mass production.
However, some people tried 100 times and finally succeeded. Let's go with the warranty.
Your U disk is expanded with a 4G chip, that is to say, the actual capacity of your U disk is only 4G, the 16G you saw before was processed by JS with software, and what you see is just an illusion, so when you copy something more than 4G, it is difficult to copy it in, even if you are admitted, the file will be broken or become garbled, and it may also be lost, and now there are many such expansion U disks on the market, especially Kingston's most, you should be especially careful when buying, so as not to be deceived.
Manufacturers specially manufactured for Chinese users and through the normal ** channels into China, in the domestic enjoy the national provisions of the warranty replacement and other rights of the product, generally called "licensed", because involving tariffs and other taxes and national policy factors, "licensed" is generally relatively expensive, because the product is designed for sale in China, so even if it is a foreign product, packaging, instructions, the language of the product itself is generally Chinese Simplified. >>>More
Maybe you make a modulation error The above picture is coming, I'll help you look at the debugging **Wrong, give you guidance, you just open the settings, don't click on the others.
After the U disk is mass-produced, you can't install the system like the optical drive, you can only enter the PE, and restore the image in the U disk to the computer in the PE. However, the successful mass production should have a boot function, you need to set the first boot from the BIOS to removable (removable device) to boot. If it can't be started, it may be that mass production is not successful! >>>More
The stupidest way,Copy it inside**,Copy it according to the G number of your U disk,It's okay if you can release it.,Like a 4G fake you can't copy two or three copies**,Upstairs is right.,If you**are too low,**The possibility is very small.。