Mi 3 flashing failed to restart infinitely how to break

If you can enter recovery, flash the machine; You can't just "save bricks".

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then put it on, and in the case of power off, press and hold the power button + home button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash, the steps are as follows:

Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Select Wipe Data Factory Reset and press the power button to confirm, then press OK with yes. Then select Wipe Cache Partition and press OK, and select Yes to OK. (This is the legendary double WIPE, friends who know about flashing must have heard of it).

Select the fifth option, install zip from sdcard, press the power button to confirm, then select choose zip from sdcard, press the power button to confirm, then select the rom to flash the file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. At this time, select Reboot System Now and press the power button to restart the phone. The first reboot takes a long time, so be patient! That's the end of flashing.

The system is not very compatible, not very perfect.

Hi! It is recommended that you use a line brush to re-flash the MIUI complete package (stable version, development version, you choose according to your own use), and try to see if it is normal:

First use the backup tool of Xiaomi phone to back up, open the system and security on the desktop Backup to create a new backup, and then enter the recovery mode to clear the data.

The backup is to package and back up the data in the mobile phone in the memory card (Mi2 series and Mi3 mobile version are memory devices), three clear data, only clear the data in the internal storage of the mobile phone, will not clear the memory device.

1. The method steps of line brushing- the official forum of Xiaomi mobile phone.

3. One of the solutions to the problems of the line brushing process - driver - Xiaomi mobile phone official forum 4, [The second solution to the problem of the line brushing process - detailed explanation of the flashing process - Xiaomi mobile phone official forum.

bPlease flash the machine according to the flashing tutorial, the flashing tutorial.

Summary. I'm sorry I can't see the ** information you provided, but if your Xiaomi phone has already had the operating system won't boot, we recommend you try to solve the problem by following these steps:1

Try to enter your phone's recovery mode by pressing and holding your phone's power key and volume down key until your phone vibrates or the mi sign appears, then releases the power key and continues to press and hold the volume down key to enter recovery mode. 2.

Once you're in recovery mode, choose Wipe Data, which will erase your phone data, so back up your important data in advance. 3.Once you've cleared your data, select Wipe Cache, which will clear the cache from your phone.

4.When you're done wiping the cache, select Reboot and restart your phone. If the above operation does not solve the problem, it is recommended that you go to the official after-sales maintenance point for repair or consult professional and technical personnel for advice.

I'm sorry I can't see the ** information you provided, but if your Xiaomi phone has already had the operating system won't boot, we recommend you try to solve the problem by following these steps:1Try to enter your phone's recovery mode as follows:

Press and hold your phone's power key and volume down key until your phone vibrates or the mi sign appears, then release the power key and continue to press and hold the volume down key to enter recovery mode. 2.Once you are in recovery mode, select Wipe Data, which will erase your phone's data, so please back up important data in advance.

3.Once you've cleared your data, select Wipe Cache, which will clear the cache on your phone. 4.

When you're done wiping the cache, select Reboot and restart your phone. If the above operation does not solve the problem, it is recommended that you go to the official after-sales maintenance point for repair or consult professional and technical personnel for advice.

If the failure during flashing causes your Xiaomi Mi 3 to not boot normally, you can try the following methods to fix the problem:1Try to enter the sideshow recovery mode and press the button"volume down"+ Power key"Keep holding until you find recovery mode 2

Once we are in recovery mode, we can proceed"Clear the data, clear the cache"Before clearing, please be sure to pay attention to the important data you need. 3.After clearing the data, you can try to reflash the noisy rom file.

4.If you can't start the recovery mode, you can try to flash the original factory recovery and then perform the operation in the recovery mode. If the above operation does not solve the problem, it is recommended that you go to the official after-sales maintenance point for repair or consult professional and technical personnel for advice.

Summary. Hello, I've kept you waiting....I'm glad to answer for you, the following is the answer to your query, I hope it will be helpful to you: I'm sorry to hear that your flashing was unsuccessful.

Here are some of the reasons that may cause flashing failure and corresponding suggestions:1Flash pack incompatible - Make sure you** are using the correct flash pack for your Mi 3 and compare your phone's current system version to see if the flash pack matches.

2.Power failure or abnormal interruption during flashing - It is recommended to fully charge the device and use a reliable data cable before flashing. During flashing, make sure your phone is in a steady state and don't move or operate your phone.

Some ROMs need to clear data during the flashing process, which will lead to all the data loss of your phone, please do a good job of backing up. 3.Incorrect or incomplete flashing tool - Recommended**Official MIUI ROM flashing tool, recovery resources, and fastboot resources.

According to the flashing method you choose, check whether the required resources are complete. 4.The phone is already rooted - If your Xiaomi Mi 3 is already rooted, it may affect the success of the flash.

It is recommended to seek help through the official MIUI-ROM forums to find a solution. If you still can't flash your device, check out the specific model, version, and ROM of the Mi 3, and seek help and guidance on the official MIUI-ROM forum!

Dear, what happened to your phone when you failed to flash it? Describe it in detail.

Hello, I've been waiting for you for a long time....I'm glad to answer for you, the following is the answer to your query, I hope it will be helpful to you: I'm sorry to hear that your flashing was unsuccessful. Here are some possible reasons for flashing failure and corresponding suggestions:

1.Flash pack is not compatible - Please make sure you** are using the correct flash pack for the Mi 3, and compare your phone's current system version with the flash pack. 2.

Power failure or abnormal interruption during flashing - It is recommended to fully charge the device and use a reliable data cable before flashing. During flashing, make sure your phone is in a steady state and don't move or operate your phone. Some ROMs need to clear data during the flashing process, which will lead to all the data loss of your phone, please do a good job of backing up.

3.Incorrect or incomplete flashing tool - It is recommended to use the official MIUI ROM flashing tool, recovery resources, and fastboot resources to tease. According to the flashing method you choose, check whether the required resources are complete.

4.The phone is already rooted - If your Xiaomi Mi 3 is already rooted, it may affect the success of the flash. It is recommended to seek help through the official MIUI-ROM forums to find a solution.

If you still can't flash your device, check out the specific model, version, and ROM of the Mi 3, and seek help and guidance on the official MIUI-ROM forum!

In order to understand and solve the abnormal problems that occur after flashing the phone, Samsung mobile phones generally recommend sending the mobile phone to the nearest service center for testing, and the service center will determine the specific problems of the mobile phone according to the test results and further processing.

Note: Due to the risks of flashing, the official website does not provide flashing software, and it is recommended not to flash the machine by yourself. If there is a problem after flashing, do not operate it by yourself to avoid the problem from expanding.

A large number of Samsung mobile phone systems crashed overnight: black screen, garbled characters, unlimited restarts.

Hello If it is an infinite restart, remove the battery, put it back on, press and hold the volume down button and the power off button at the same time, until an interface with English appears, then let go, the volume down button is select, the power off button is OK, select -wipe date factory reset (the phone clears the data and reverts to the factory settings) and then press the power off button to confirm. If it doesn't work, go to Xiaomi after-sales.

1. In this case, you can connect the mobile phone to the computer, and then use the flashing tool miflash software to flash the complete system package for the mobile phone.

2. If the connection to the computer does not respond or the flashing cannot be successful, it may be caused by hardware problems, such as battery failure, motherboard chip failure, internal circuit failure, etc., and you need to contact Xiaomi's after-sales service to test and repair the mobile phone to solve it.

Try it three times first.,No, it's in the flash!

Same as I used to! Re-brush!

1. The phenomenon of mobile phone flashing failure, it is recommended to take off the battery to prevent the non-stop restart from causing damage to the mobile phone hardware.

2. You can contact the after-sales service to re-flash the phone. The phone is not warranted after flashing, so it costs money to flash the phone.

3. Or find a professional mobile phone repair shop to check the fault of the mobile phone, or professional flashing.

4. If you know a lot about flashing your mobile phone and are professional, you can brush it again, if you are not professional, you should not brush it casually.

Hello. Shuangqing buried it and tried it.

Shuangqing tutorial, which is used to clear the lock screen password, and remove multiple software flashback problems caused by flashing.

If you can, use the backup software that comes with your phone to back up.

Shuangqing needs to enter the REC mode of the mobile phone, and there are two ways to enter.

1. Click on the system bend pure update, click the menu key to select restart to recovery, click OK, and the phone will reboot into recovery mode.

2. In the shutdown state (buckle battery shutdown), press and hold the power button and the volume down button at the same time (the 4G version of the Redmi Note is the volume up button, not the volume down button!) ), light up the screen and release the buttons.

Then you'll see three options.

Recovery mode means to enter REC mode.

fastboot mode means to enter the wire brush mode.

norma boot means reboot.

At this time, the volume down button is the selection key, the volume up button is the OK key, and the power button is useless.

Press the volume down button to move the cursor to recovery mode, then press the volume up button to confirm, and wait for a few moments for it to appear.

A green android robot lying on the ground, finally press the power button to enter.

At this time, the volume up button is the confirmation key, and the volume down button can be selected.

3.Select [Wipe Data Factory Reset] yes -

4.Select [wipe cache partition] yes -

5. Wait for the progress bar to end, press Back, select [Reboot System Now], and the phone will start to restart automatically.