How to flash kido children s watches

2. Turn off the phone completely, press and hold the volume up and down button + power button at the same time to enter fastboot mode, select the up and down buttons, and confirm the power button. Select Recovery Mode, the power button confirms, and you will see the third-party recovery that you have just flashed, and what you need to do at this time is to double clear.

3. Select wipe, wipe date factory reset, and then find yes-delete at all.

4. Select wipe cache partition and find yes-delete at all.

5. Select Install Zip from SDCacard to select the flashing package from the SD card, then select Choose Zip from SD card Select the zip format upgrade package from the SD card, find the flashing package that you just copied to the phone, and confirm the flashing with the power button.

The steps to add it are as follows:

1. In the **watch.

The main page, find "My" in the bottom right corner, and enter its main page.

2. Find and click on the sixth item "Family Management".

3. In "Family Management", we find and click "Add New Member" at the bottom

4. In the "Add New Member", we still have to continue to click "Add New Member".

5. We can check the relationship between the new member and the child or a custom name, such as "classmate".

6. After the new creation is completed, we can see the information of the newly added members in the member list.

Now the development of society is getting faster and faster, there are more and more cars on the road, children must pay more attention when they go out to play, some parents in order to understand their children's information in real time, often buy children's watches to wear, it is more recommended to be the ** watch of the kido brand, it is said that parents can learn about their children's information through the app. So how does the kido children's watch app **? How does kido**watch app?

The method of the Kido children's watch app is very simple, if you want to connect the phone and the children's watch together, you need to have an app on the phone. First of all, you need to find the official version of the kido children's watch in the software store of the mobile phone,**The method of the app is to find the software and click on the right**It's good,**After that, install it on the mobile phone according to the prompts,The second is to turn on the Bluetooth of the mobile phone and the watch,After opening, the two are paired successfully,So that the mobile phone can always grasp the information of the children's watch or the leaky ruler。

kido children's watch is relatively intelligent,**Good software after parents can grasp the child's high-level information in real time,In addition, the question and answer function has been added,Bring more intimate service to children。 Kido children's watch is relatively intelligent, supporting 4G call and ** function, more convenient to use, and specially adding a one-button alarm function, which can better protect the safety and health of children.

How to replace the battery of kido children's watch Open the heterodyne dust cover, the soft cable may be the line of the battery, take off the battery, and then open the clip on the circuit board to take out the soft cable, and the new battery can be installed in reverse order. If you are not confident in your own operation, it is recommended to go to the after-sales service to talk about it. The back cover of the watch is waterproof, and the back cover needs professional tools or methods to open, and you can bring the watch and warranty card to the local little genius after-sales service for free testing and disassembly.

If it is forcibly dismantled, it will leave traces during the dismantling process, which will cause the situation that Lao Tan cannot be guaranteed. 1. First remove the strap and dial of the little genius** watch, and use your fingernails to pick out the jam from the arc position, which can be easily separated. 2. Fix the watch with one hand, and use a tool knife with the other hand to cut the layer of soft rubber on the front.

3. Slowly separate the dial cover from the watch chassis along the edge of the waterproof rubber case. 4. Break the dial cover and watch chassis by hand. 5. Separate the dial cover from the watch chassis.

Extended information: The structure of the little genius** watch: 1. The strap of the little genius** watch is fixed by two sets of locking screws, and the SIM card cover is fixed by the buckle.

2. The SIM card cover is waterproof with silicone, and there is a graphite sheet pasted inside the card cover. 3. The back cover of the little genius ** watch is passed.

The steps to add it are as follows:

1. On the main page of the watch, find "My" in the lower right corner and enter its main page.

2. Find and click on the sixth item "Family Management".

3. In "Family Management", we find and click "Add New Member" at the bottom

4. In the "Add New Member", we still have to continue to click "Add New Member".

5. We can check the relationship between the new member and the child or a custom name, such as "classmate".

6. After the new creation is completed, we can see the information of the newly added members in the member list.

etc.), and then follow the steps below to do a factory reset.

2. Two ways:

1) In the power-on state, go to the phone Settings - Storage - Menu to the bottom, and click Restore factory settings.

2) Shut down the device completely, and then press and hold the "Volume Reduction Button" + "Power Button" at the same time until the Hboot interface appears on the phone, then let go, press the Factory Reset item in the volume selection page, and press the power button to clear all data and restore to factory settings after selection.

3. After restarting the phone, the device Sakura will restore the factory settings.