It takes 10 minutes for the XP system to boot up

Why think about the hardware? From soft to hard.

Then try a different motherboard.

Your next QQ security butler has one-click optimization inside. Improve the boot beam.

The easiest way is to optimize it with 360.

I don't know much about this, can you optimize it and try it?

Thermal issues, CPU temperature is too high or graphics card temperature is too high, from boot to running a few minutes later, the temperature makes the hardware run abnormally, causing a reboot.

Check the heat dissipation to make sure the temperature is within the normal range.

System problems, after entering the system, the system program runs incorrectly, resulting in a reboot.

You can try to repair the system.

Virus. Antivirus: Make sure that the antivirus virus database version is up-to-date, and you can try more than 2 types of antivirus software.

Is there a hardware problem, such as a fan that has been replaced, causing the CPU temperature to be too high, causing the computer to restart, or the system is faulty! , you check the hardware first, and if there is no problem with the hardware, reinstall the system.

Don't be in a hurry to reinstall it first, first kill the virus and kill the Trojan, clean up the garbage, upgrade the patches that can be upgraded, optimize the computer with optimization software, and clean up the disk. If it doesn't work, just try to restore, and you can see the window when you boot it

XP and use the up and down keys to select Restore.

Maybe your friend's XP has been optimized for the system.

It's also possible that your friend's computer is better configured than yours.

This depends on your configuration and the startup item is something More than 40 seconds is good This doesn't mean what win8 is the fastest mobile phone with ......You can try.

Clean up the junk and don't install the software on the system drive.

Because there are too many junk files in your computer, you need to clean up the software!

Method 1: The temperature is too high.

The temperature is too high. 2.The temperature inside the chassis is too high.

3.The power supply temperature is too high.

Clean up the dust in the case, especially the dust in the gaps between the CPU fan and the cooling base, and make sure that it is placed near the heat source.

Method 2: Plug the hard disk back in to see if there is any poor contact or an interface that is oxidized.

Method 3: Install the graphics card driver.

Hardware monitor means hardware monitor.

If something is wrong with the hardware, he will display some information.

For example, CPU temperature or something, you find a computer expert who is familiar with BOIS settings.

You can go in and turn this function off, and the message will not be displayed (of course, it may cost a little mane).

Good luck!

Maybe there's a problem with the hard drive.。。 lz to go and detect it,.

There are too many bad sectors on hard drives! Try a different hard drive!

If the lights are not lit, it means that the power supply is not connected, and you need to check whether the connected line or the power supply has been aged.

You said that the host didn't start, so the most basic thing is that the fan doesn't even turn?

Also, during the black screen, is the case light always on or does it flicker normally? Because there is no problem with checking the motherboard, memory, and graphics card, you can put the target on the hard disk, and the following is my guess:

1.Hard drive corruption, also known as bad sectors.

2.If the connection cable is not in good contact, you can try to unplug each cable and reinsert it.

3.Interfaces are dusty or oxidized.

It must be that the memory is broken, and such a problem will occur if the memory cannot be detected at boot.

Processing steps: 1. Unplug the memory, and then restart it, if there is a continuous sound, it proves that your memory must be broken. Because when the hardware is turned on, the hardware detection is the same, but it does not respond.

2. Wipe the gold finger on the memory with an eraser, clean it, and then re-erase it and restart it.

3. If it still doesn't work, then you have to spend some RMB to buy a new memory.

See if the bois is set up incorrectly.

First of all, look at your monitor, okay? Look again at the computer cooling system is normal, focus on the CPU fan, if it doesn't work, try to reinstall the system, or it doesn't work, most of the hardware problems, take it to fix it.

You try to restore the BIOSS by default.