What should I pay attention to when installing the sewer pipe in the bathroom on the first floor?

What problems should be paid attention to when installing the toilet sewer pipe?

No, it cannot be installed.

According to Article 5 of the Administrative Measures for Residential Interior Decoration, the following behaviors are prohibited for residential interior decoration activities:

A) without the original design unit or the design unit with the corresponding qualification level to put forward the design plan, change the main body of the building and load-bearing structure;

2) Changing rooms or balconies without waterproof requirements into bathrooms and kitchens;

3) Expand the size of the original doors and windows on the load-bearing wall, and remove the brick and concrete walls connecting the balconies;

4) Damage the original energy-saving facilities of the house and reduce the energy-saving effect;

5) Other behaviors that affect the safety of building structure and use.

Article 6 stipulates that decorators engaged in residential interior decoration activities shall not engage in the following acts without approval:

1) Erection of buildings and structures;

2) Changing the façade of the dwelling, opening doors and windows on non-load-bearing exterior walls;

3) Demolition and alteration of heating pipes and facilities;

4) Demolition and modification of gas pipelines and facilities.

The acts listed in item (a) and (b) of this article shall be approved by the competent administrative department of urban planning; (3) acts, shall be approved by the heating management unit; The act in item (4) shall be approved by the gas management unit.

Method: The multi-storey building is a riser per unit, and there is no problem of separate pipes on the first floor for drainage. Drainage may be provided separately on the first floor of a high-rise building.

However, there is generally no blockage of the drain pipe (under normal use), because the current drainage tee is an oblique tee or a smooth tee, and the toilet is a siphon type, and there is a force to pump water when flushing.

No, the sewer is from the basement past, and the original building has a wall casing, steel and concrete pouring, and it can't be opened.

Absolutely, as long as your installation doesn't affect the functionality of the original pipeline.

If possible, it is necessary to arrange the pipes independently.

Hello, it is better to install a separate sewer on the first floor to avoid damage to the fish pond.

1. Check the integrity of the water pipes and fittings before installation to see if there is any damage or omission. In order to avoid cracking, water leakage and other phenomena after installation.

2. After checking that it is correct, measure the thickness of the wall tile, and then determine its installation position according to this thickness.

3. After the location is determined, the installation can begin, and it is recommended to adopt the overall installation method, and the use of connecting accessories should be reduced, so as to avoid the problem of leakage in later use. If you use a connecting fitting, you need to make sure that it is secure. In addition, during the installation process, it is also necessary to pay attention to the layout of the washing machine, socket and other positions, so as not to affect the use.

4. Finally, after the installation of the sewer pipe, check whether there is leakage, and if not, it can be used.

Water Pipe Direction:

It is recommended that the water pipe go to the top safely. The main reason is that most of the waterway reconstruction is done by dark pipes, and the characteristic of water is that water flows to a lower place. If the pipeline goes underground, it is difficult to find the leakage in time once it occurs, and the leakage will only be found if the water overflows or the floor is deformed and leaks downstairs, and it is difficult to find the leakage because the water pipe is buried.

At this time, the huge loss is irreparable, and even seriously affects the friendly neighborly relationship; If the water pipe goes to the top, it may be more expensive to change the water, but it is worth it in the long run. Even if the water pipe goes to the top, even if the water leaks, it can be found in time, which is convenient for maintenance and the loss is small.

Friends who have had the decoration of the sanitary burning and forest know that the good and bad of the bathroom decoration can actually be said to have a lot to do with the installation of the pipeline. Let's introduce to you what matters to pay attention to in the decoration of bathroom pipes and how to wrap the toilet sewer pipes.

What matters should be paid attention to in bathroom plumbing decoration?

1. Before installing the sewer pipe, the first thing to do is to check whether the water pipe and connecting fittings are damaged, cracks and other phenomena.

2. When designing the sewer pipe, it is necessary to consider many aspects, such as the installation position of the faucet of the washing machine, and at the same time, special attention should be paid to whether the position of the power socket is not installed in the appropriate position.

3. It can be said that the top of the water pipe is the best, you must know that most of the current waterway renovation is the use of dark pipes, and it is also clear that the characteristics of water are that water flows to a low place. If the pipeline goes underground, if some water leakage is found, there may be flooding or floor deformation and leakage downstairs, and the most important thing is to check it is more troublesome. If it is severe, it may also affect the relationship between neighbors; If the water pipe goes to the top, the cost of water reform may be higher, but if you look at the long-term investment, it can be said that the water pipe is still better to go to the top, even if the water leaks, it is relatively easy to find, and it is also easy to repair, and the loss will be relatively small.

4. When installing hot water pipes, special attention should be paid to distinguishing the water inlet and outlet of the water heater, you should know that the water inlet is connected to the main valve, and the water outlet is connected to the toilet pipe, and it should be checked after installation, so as to know whether there is no leakage.

5. When installing the sewer pipe, it is also necessary to consider the thickness of its wall tiles.

6. When the bathroom pipe is decorated, remember to carry out a pressurization test on the water pipe after installation: the pressurization test is generally carried out under the condition of water pressure multiplication, so that you can check whether there is any water leakage.

How to wrap the toilet sewer pipe.

1. You can use red bricks, and the outside is tiled, which has a good overall effect and is also good in terms of sound insulation.

2. Light steel keel cement board, this method is also to use tiles to decorate outside, relatively speaking, it will save a little space than red brick masonry, but this kind of tile is easier to fall off, so special attention should be paid to.

3. Wooden keel, generally speaking, it is attached to PVC, that is, the material of the ceiling, this method is relatively simple to disassemble and assemble, but the overall effect is not so good-looking, and you must know that PVC is also relatively easy to age.

4. The base layer of woodworking board can be aluminum-plastic board for external pasting, with a smooth surface and a better effect.