-
1.Attention to non-motorized vehicles on the right.
2.Control the speed of the vehicle.
3.Increase the following distance.
4.Try to avoid overtaking.
5.Overcome driving fatigue.
6.Accurately judge road conditions.
7.Have emergency lights ready.
You can refer to the online materials.
-
Be sure to learn the simulated lights at night, and pay attention to the use of lights when driving at night.
-
What are the precautions for driving at night? The veteran driver poured his money into it, and it is recommended that novices collect it.
-
1. Incomplete anti-lighting: Do a good job of inspection before leaving the car at night. Headlights, brake lights, turn signals, etc. should be in good condition, and flashlights should be prepared on the car so that you can be prepared in case of breakdowns on the way.
2. Prevent unclear vision: At night, the car is sparse and the people are easy to be paralyzed, the speed is easy to speed up, and the danger increases. The windshield should be clean before driving at night, otherwise the visibility will be poor when driving, and do not wear dark glasses.
3. Prevent the speed of the vehicle from being too fast: the speed of the vehicle should be controlled at 50 60 kilometers, and the driving should be far away from the roadside, and when the line of sight and suburban road conditions allow, you can drive on the road, pay attention to the traffic on both sides of the road and the opposite side, and take measures in advance.
4. Improper use of anti-lighting: The car should slow down at night, generally close the headlights 150 meters away from the opposite car, and use low beams. After meeting the car, you should turn on the lights in time to observe the road conditions ahead, and take corresponding measures in advance.
At the intersection, the curve should be used to inform the other party of the incoming car with far and near light.
5. Anti-overtaking accidents: When overtaking, you must first inform the vehicle in front of you with far and near light when the road conditions permit, and then turn signal to the left after the car in front gives way, and then turn signal to the right after about 20 meters, drive back to the original lane, and must not forcibly overtake to avoid accidents.
6. If you are in the city, when the street lights are compared, there is basically no need for low beams, let alone high beams. However, many people even have to turn on the high beams on the roads of the city, which is not only easy to have an accident (not yourself, but others are blinded by your high beams), but also consumes special fuel, hehe, harming others and themselves;
7. On non-highways in the suburbs, you can turn on the high beams, but when there is a car coming on the opposite side, you must switch to low beams, the best thing is to switch between high beams and low beams, and the other party can see each other's vehicle shape clearly, just like two people are talking, so as to pass safely, especially the truck, the moment you pass, you can turn on the high beams again; But many drivers, especially novices, don't know this rule, and it's dangerous to be high beams at all times. If you have driven a mountain road, you know that it is more dangerous; If the other party is high beam, you can flash the high beam to remind him, if the other party ignores you, it is best to slow down and avoid passing;
8. If you still want to drive at night, and it is on a mountain road, or a road with more turns, before turning, you must drive on your own road on the right side, do not cross the line, and remember to be sure to convert the high beam and low beam several times, if there is a vehicle on the opposite side, you can see it, if it does not flash, the other party may not be able to see. If it's daytime, be sure to honk your horn to notify the vehicles that are likely to come on the other side.
-
Driving at night, due to fatigue and poor vision, is prone to traffic accidents and violations. Now driving schools have added night tests. What are some driving tips for driving at night?
1.At dusk, the human eye is unable to adapt to the outside light, and the situation on the road is the most difficult to judge. Especially on the way to work, pedestrians and various motor vehicles are complicated.
Drivers should slow down as much as possible and be aware of pedestrians and vehicles on the road. Sometimes passing cars don't change their low beams, and even worse, they deliberately use high beams to illuminate your eyes so that you can't tell what's ahead. At this time, you can't be impulsive, and you can't "treat others the way they do" to quarrel with each other.
You have to be calm, have a "a little unbearable, make a mess" mentality, slow down and ask Qi early or pull over.
2.At night, there are fewer pedestrians and vehicles on the road, and the driver has adapted to the outside light, and the line of sight will get better and better, and the speed can be appropriately increased with the help of high and low beam lighting. But be sure to drive in the prescribed lane and speed, and try not to get too close to the side of the road.
Sometimes there are pedestrians on the side of the road or motor vehicles without lighting, and there may be obstacles.
3.Driving on a road with trees on both sides of the road, light is easy to gather, which can make the road bright and clear, and it is also easy to judge the road conditions and traffic conditions at the intersection. But when there is no condensation or reference on either side of the road, the light is easily scattered, the light becomes darker, and the visibility becomes lower.
At this time, the speed of the vehicle should be reduced, and the situation of the beam irradiating the road surface should be judged, and the road surface should be observed for scribing, whether there are curves or broken ends. A curve indicates that there is a curve, and the broken end may reach the intersection. At this point, you have to slow down.
Roads that do not cross can be judged by lampposts. Generally, the road surface is gray-black, and the outside of the road surface is black. If light hits a black road surface from black gray, there may be potholes or standing water.
When the beam changes from far to near, there may be a curve or uphill road, and when the beam changes from near to far, it may be a downhill road.
4.Try to avoid overtaking at night. When you need to overtake, you can continuously change the high and near lights to notify the vehicle in front.
After making sure that the vehicle in front is allowed to overtake, overtake again and scan the left and right rearview mirrors with the cornering lights to prevent the rear car from forcibly overtaking. If the vehicle behind is giving an overtaking signal, first observe the situation behind you through the rearview mirror, and then turn right when there is no oncoming traffic behind you, and slowly enter the lane to be changed, while paying attention to the dynamics of the vehicle in front.
5.Drowsy driving is prohibited. At night, the traffic and pedestrians on the road gradually decrease, the road gradually becomes quieter, and the driver is unable to observe the scenery on both sides of the road, and the excitement decreases.
Because of the original balance of the biological clock, it is easy to get tired when driving at night. If there is someone talking to the car, it can also lift the spirits. For example, if the person following the car falls asleep, it is more likely to cause the driver to get tired and feel sleepy.
In this case, if you feel a little uncomfortable, you should pull over immediately, wash your face with cold water, or park your car in a safe place to rest. If you can't lift your spirits, you can only find a nearby place to rest. In this case, you must not be interfered with by others and forced to drive.
Millions of car purchase subsidies.
-
1. Control the speed, at night, there is less interference from pedestrians and non-motorized vehicles, so it is easy for friends to go at high speed like a group car. However, there are some sections of the road where the illumination is not sufficient at night, so when driving to places with low visibility such as turns, slopes, and narrow roads, friends must control their speed. In the same way, slow down when driving from light to dark, because the eyes also need a process of adaptation.
The projection headlights equipped with Xiaojia can also come in handy, Xiaojia's headlights are added to the LED parking lights, so that it is easier for friends to see the road conditions and drive safely when driving at night.
2. Switch the high and low beams in time, when the two cars are 150 meters apart, the high beams should be switched to low beams, which is driving etiquette and for driving safety. If you really meet someone who doesn't have the quality to keep turning on the high beam, don't be angry, for the safety of the orange, just pull over for a while. Remember!
Don't be angry and use strong light to shoot, safety always comes first!
3. Try to avoid overtaking, driving at night, friends still try to avoid overtaking, when you must overtake, you should continuously switch the high and low beams to inform the car in front, and be sure to observe whether there are obstacles on the right side of the overtaken vehicle. When you encounter a large truck, you can get as far away as you can, and for safety, don't rob it.
-
When driving a vehicle at night, you should pay attention to: 1. When the oncoming vehicle is 150 meters away, the high beam should be changed to low beam; 2. In night driving, if the speed is less than 30 kilometers per hour, the low beam next to the leather opening should be used, and the light can shine out 30 meters away under normal conditions; 3. It is necessary to pay attention to the intersection often encountered by driving at night, and the driving situation of the other car can be based on the illumination of the oncoming lights on the side road; 4. Remember to keep a safe distance when following the car at night. When driving at night, be aware of road obstacles and road construction lights, etc., and slow down in dark areas or when road conditions are difficult to identify. Burning oak.
-
When we drive a vehicle, we will observe the surrounding situation, once overtaking, switching routes, etc., as a driver, we can react as soon as possible, reserve enough time to let themselves react, but we do not necessarily drive during the day, banquet grandchildren may also need to drive vehicles to different places at night, at this time many drivers will be extremely careful, in the general understanding of many drivers, all think that driving at night is more dangerous, So what are the things that need to be paid attention to when driving at night? How to ensure safety when driving at night?
The biggest problem of driving at night is that the distance to observe the surrounding situation is limited, in the absence of lights, we have no way to view the surrounding situation of the vehicle in the process of driving, we can only infer the distance from the rear car through the rearview mirror of the vehicle, the dynamic situation of the rear vehicle, once there is no light irradiation, our surroundings are pitch black, and we can only see the distance reached by the light, which will also make us have a blind spot in the line of sight, and there is no way to predict the coming of danger in time. This has also led to the occurrence of traffic accidents, the concentration of driving at night has decreased, and it has also caused a certain dangerous problem, so we need to pay attention to our speed not to be too fast when driving at night, and reserve time for ourselves to avoid danger.
In order to ensure their safe driving at night, then the most important thing is to avoid fatigue driving, some drivers in order to arrive at the destination as soon as possible, regardless of their tired physical condition, still in the night fatigue driving, and the process of fatigue driving will only make the driver's attention slowly decline, so that there is no way to notice the changes on the road in time, dangerous accidents also occur, night driving is a high risk factor, avoiding fatigue driving is also an important condition to avoid traffic accidents, In order to ensure your own safety, do not drive excessively tired, and find a safe place to rest in time.
-
What you need to pay attention to before teasing is to slow down when driving at night, choose to use lights, and turn on the low beam when driving at night, and you also need to pay attention to the situation of Zhoushan Qingwei, slow down to ensure safety and respect.
-
Be sure to pay attention to safety when driving at night, especially to observe whether there are any vehicles or obstacles in front of you. When driving at night, the speed should be reduced, and the high beams should be turned into low beams when encountering a vehicle. Drivers who drive at night should obey the traffic laws to avoid traffic accidents.
When driving at night, pay close attention to the oncoming traffic in front of you.
-
Don't keep your high beams on when driving at night, concentrate on your spine, and don't drive tiredly. Those who drive at night must pay attention to their personal state and not doze off.
-
At night, you must pay attention to keeping a distance between cars, turn on the small lights and headlights of the car when driving at night, and pay attention to the road conditions of the former party, so as to ensure safety.
The safety precautions for driving at night are: 1. Reasonable use of lights; 2. Pay attention to keep the distance between vehicles; 3. Observe the road conditions; 4. Do not stop or make a U-turn at the bridge; 5. Don't speed; 6. Don't drive tiredly; 7. Don't overtake at will; 8. Stop cautiously on remote road sections. How to use the night running lights are: >>>More
Driving at night is inseparable from the illumination of lights, and if the lights are used incorrectly, it will not only affect the observation of the situation on the road, but also cause traffic accidents. Turning on the headlights is not just for illumination, but more importantly for other traffic participants to be able to observe the car's presence. Poor sight at night, reasonable and civilized use of lights is the key to safe driving. >>>More
How to use the high beams and low beams of the car correctly at night? There's an answer!
1.Turn on the high beams, which is the first 2Rainy and foggy days need to slow down and slow down 3In the event of an accident, pull over and turn on the safety warning light4You need to pay more attention to the road without traffic lights, there is a lot of drunken and sweaty crazy driving at night, you have to dodge smartly.
You can take physical cooling methods to help your baby reduce fever first! You can use ice cubes to cool your baby, and at the same time use warm water to help your baby wipe his whole body, both of which can help his baby reduce fever!